Fix corner-case errors and loss of precision in numeric_power().

This fixes a couple of related problems that arise when raising
numbers to very large powers.

Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.

Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:

  local_rscale = rscale + (int) val - ln_dweight + 8

The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.

Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.

Dean Rasheed, reviewed by Yugo Nagata.

Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com

diff --git a/src/backend/utils/adt/numeric.c b/src/backend/utils/adt/numeric.c
index 8ffeb6166e3fefa65ae402248669b3370ca25df7..1dc0dd32e3b36c656ebea6d9d87965ce7e260aca 100644 (file)
--- a/src/backend/utils/adt/numeric.c
+++ b/src/backend/utils/adt/numeric.c
@@ -2802,7 +2802,9 @@ numeric_power(PG_FUNCTION_ARGS)
    /*
     * The SQL spec requires that we emit a particular SQLSTATE error code for
     * certain error conditions.  Specifically, we don't return a
-    * divide-by-zero error code for 0 ^ -1.
+    * divide-by-zero error code for 0 ^ -1.  Raising a negative number to a
+    * non-integer power must produce the same error code, but that case is
+    * handled in power_var().
     */
    if (cmp_var(&arg1, &const_zero) == 0 &&
        cmp_var(&arg2, &const_zero) < 0)
@@ -2810,12 +2812,6 @@ numeric_power(PG_FUNCTION_ARGS)
                (errcode(ERRCODE_INVALID_ARGUMENT_FOR_POWER_FUNCTION),
                 errmsg("zero raised to a negative power is undefined")));
 
-   if (cmp_var(&arg1, &const_zero) < 0 &&
-       cmp_var(&arg2, &arg2_trunc) != 0)
-       ereport(ERROR,
-               (errcode(ERRCODE_INVALID_ARGUMENT_FOR_POWER_FUNCTION),
-                errmsg("a negative number raised to a non-integer power yields a complex result")));
-
    /*
     * Call power_var() to compute and return the result; note it handles
     * scale selection itself.
@@ -7626,12 +7622,18 @@ exp_var(NumericVar *arg, NumericVar *result, int rscale)
     */
    val = numericvar_to_double_no_overflow(&x);
 
-   /* Guard against overflow */
+   /* Guard against overflow/underflow */
    /* If you change this limit, see also power_var()'s limit */
    if (Abs(val) >= NUMERIC_MAX_RESULT_SCALE * 3)
-       ereport(ERROR,
-               (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-                errmsg("value overflows numeric format")));
+   {
+       if (val > 0)
+           ereport(ERROR,
+                   (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
+                    errmsg("value overflows numeric format")));
+       zero_var(result);
+       result->dscale = rscale;
+       return;
+   }
 
    /* decimal weight = log10(e^x) = x * log10(e) */
    dweight = (int) (val * 0.434294481903252);
@@ -7976,10 +7978,13 @@ log_var(NumericVar *base, NumericVar *num, NumericVar *result)
 static void
 power_var(NumericVar *base, NumericVar *exp, NumericVar *result)
 {
+   int         res_sign;
+   NumericVar  abs_base;
    NumericVar  ln_base;
    NumericVar  ln_num;
    int         ln_dweight;
    int         rscale;
+   int         sig_digits;
    int         local_rscale;
    double      val;
 
@@ -8019,9 +8024,40 @@ power_var(NumericVar *base, NumericVar *exp, NumericVar *result)
        return;
    }
 
+   init_var(&abs_base);
    init_var(&ln_base);
    init_var(&ln_num);
 
+   /*
+    * If base is negative, insist that exp be an integer.  The result is then
+    * positive if exp is even and negative if exp is odd.
+    */
+   if (base->sign == NUMERIC_NEG)
+   {
+       /*
+        * Check that exp is an integer.  This error code is defined by the
+        * SQL standard, and matches other errors in numeric_power().
+        */
+       if (exp->ndigits > 0 && exp->ndigits > exp->weight + 1)
+           ereport(ERROR,
+                   (errcode(ERRCODE_INVALID_ARGUMENT_FOR_POWER_FUNCTION),
+                    errmsg("a negative number raised to a non-integer power yields a complex result")));
+
+       /* Test if exp is odd or even */
+       if (exp->ndigits > 0 && exp->ndigits == exp->weight + 1 &&
+           (exp->digits[exp->ndigits - 1] & 1))
+           res_sign = NUMERIC_NEG;
+       else
+           res_sign = NUMERIC_POS;
+
+       /* Then work with abs(base) below */
+       set_var_from_var(base, &abs_base);
+       abs_base.sign = NUMERIC_POS;
+       base = &abs_base;
+   }
+   else
+       res_sign = NUMERIC_POS;
+
    /*----------
     * Decide on the scale for the ln() calculation.  For this we need an
     * estimate of the weight of the result, which we obtain by doing an
@@ -8052,11 +8088,17 @@ power_var(NumericVar *base, NumericVar *exp, NumericVar *result)
 
    val = numericvar_to_double_no_overflow(&ln_num);
 
-   /* initial overflow test with fuzz factor */
+   /* initial overflow/underflow test with fuzz factor */
    if (Abs(val) > NUMERIC_MAX_RESULT_SCALE * 3.01)
-       ereport(ERROR,
-               (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-                errmsg("value overflows numeric format")));
+   {
+       if (val > 0)
+           ereport(ERROR,
+                   (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
+                    errmsg("value overflows numeric format")));
+       zero_var(result);
+       result->dscale = NUMERIC_MAX_DISPLAY_SCALE;
+       return;
+   }
 
    val *= 0.434294481903252;   /* approximate decimal result weight */
 
@@ -8067,8 +8109,12 @@ power_var(NumericVar *base, NumericVar *exp, NumericVar *result)
    rscale = Max(rscale, NUMERIC_MIN_DISPLAY_SCALE);
    rscale = Min(rscale, NUMERIC_MAX_DISPLAY_SCALE);
 
+   /* significant digits required in the result */
+   sig_digits = rscale + (int) val;
+   sig_digits = Max(sig_digits, 0);
+
    /* set the scale for the real exp * ln(base) calculation */
-   local_rscale = rscale + (int) val - ln_dweight + 8;
+   local_rscale = sig_digits - ln_dweight + 8;
    local_rscale = Max(local_rscale, NUMERIC_MIN_DISPLAY_SCALE);
 
    /* and do the real calculation */
@@ -8079,8 +8125,12 @@ power_var(NumericVar *base, NumericVar *exp, NumericVar *result)
 
    exp_var(&ln_num, result, rscale);
 
+   if (res_sign == NUMERIC_NEG && result->ndigits > 0)
+       result->sign = NUMERIC_NEG;
+
    free_var(&ln_num);
    free_var(&ln_base);
+   free_var(&abs_base);
 }
 
 /*

diff --git a/src/test/regress/expected/numeric.out b/src/test/regress/expected/numeric.out
index bbc7f1c0a08c17a9cd6744ba81368cfd6dd12342..7150a68cb2b0accdbb6192c29a72108e247cdbe5 100644 (file)
--- a/src/test/regress/expected/numeric.out
+++ b/src/test/regress/expected/numeric.out
@@ -1518,6 +1518,12 @@ select 1.000000000123 ^ (-2147483648);
  0.7678656556403084
 (1 row)
 
+select 0.9999999999 ^ 23300000000000 = 0 as rounds_to_zero;
+ rounds_to_zero 
+----------------
+ t
+(1 row)
+
 -- cases that used to error out
 select 0.12 ^ (-25);
                  ?column?                  
@@ -1531,6 +1537,43 @@ select 0.5678 ^ (-85);
  782333637740774446257.7719390061997396
 (1 row)
 
+select 0.9999999999 ^ 70000000000000 = 0 as underflows;
+ underflows 
+------------
+ t
+(1 row)
+
+-- negative base to integer powers
+select (-1.0) ^ 2147483646;
+      ?column?      
+--------------------
+ 1.0000000000000000
+(1 row)
+
+select (-1.0) ^ 2147483647;
+      ?column?       
+---------------------
+ -1.0000000000000000
+(1 row)
+
+select (-1.0) ^ 2147483648;
+      ?column?      
+--------------------
+ 1.0000000000000000
+(1 row)
+
+select (-1.0) ^ 1000000000000000;
+      ?column?      
+--------------------
+ 1.0000000000000000
+(1 row)
+
+select (-1.0) ^ 1000000000000001;
+      ?column?       
+---------------------
+ -1.0000000000000000
+(1 row)
+
 --
 -- Tests for raising to non-integer powers
 --
@@ -1618,6 +1661,18 @@ select exp(1.0::numeric(71,70));
  2.7182818284590452353602874713526624977572470936999595749669676277240766
 (1 row)
 
+select exp(-5000::numeric) = 0 as rounds_to_zero;
+ rounds_to_zero 
+----------------
+ t
+(1 row)
+
+select exp(-10000::numeric) = 0 as underflows;
+ underflows 
+------------
+ t
+(1 row)
+
 -- cases that used to generate inaccurate results
 select exp(32.999);
          exp         

diff --git a/src/test/regress/sql/numeric.sql b/src/test/regress/sql/numeric.sql
index d0d05957e615d4c9fc6ed68e0afd85bd639bf596..83a4f3c89d4a3a7e3af2711ff7a323c137781ce7 100644 (file)
--- a/src/test/regress/sql/numeric.sql
+++ b/src/test/regress/sql/numeric.sql
@@ -876,10 +876,19 @@ select 3.789 ^ 35;
 select 1.2 ^ 345;
 select 0.12 ^ (-20);
 select 1.000000000123 ^ (-2147483648);
+select 0.9999999999 ^ 23300000000000 = 0 as rounds_to_zero;
 
 -- cases that used to error out
 select 0.12 ^ (-25);
 select 0.5678 ^ (-85);
+select 0.9999999999 ^ 70000000000000 = 0 as underflows;
+
+-- negative base to integer powers
+select (-1.0) ^ 2147483646;
+select (-1.0) ^ 2147483647;
+select (-1.0) ^ 2147483648;
+select (-1.0) ^ 1000000000000000;
+select (-1.0) ^ 1000000000000001;
 
 --
 -- Tests for raising to non-integer powers
@@ -912,6 +921,8 @@ select 1.234 ^ 5678;
 select exp(0.0);
 select exp(1.0);
 select exp(1.0::numeric(71,70));
+select exp(-5000::numeric) = 0 as rounds_to_zero;
+select exp(-10000::numeric) = 0 as underflows;
 
 -- cases that used to generate inaccurate results
 select exp(32.999);