[test] master_test #1

kernel-patches-bot · 2022-02-15T17:04:46Z

branch: master_test
base:bpf-next
version: edc21dc

Since we've started treating fallocate more like a file write, we should flush the log to disk if the user has asked for synchronous writes either by setting it via fcntl flags, or inode flags, or with the sync mount option. We've already got a helper for this, so use it. [The original patch by Darrick was massaged by Dave to fit this patchset] Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]>

Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <[email protected]>

While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]>

While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <[email protected]>

Refuse SIDA memops on guests which are not protected. For normal guests, the secure instruction data address designation, which determines the location we access, is not under control of KVM. Fixes: 19e1227 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <[email protected]> Cc: [email protected] Signed-off-by: Christian Borntraeger <[email protected]>

Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3. Since this is a privilege violation, default disable SMM visibility where possible. Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file. [0] https://rr-project.org/ [1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5. Reported-by: Kyle Huey <[email protected]> Suggested-by: Andrew Cooper <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]

The intent has always been that perf_event_attr::sig_data should also be modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is observable by user space if SIGTRAP on events is requested. Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies relevant breakpoint-related attributes in hw_breakpoint_copy_attr(). This misses copying perf_event_attr::sig_data. Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a helper to copy generic event-type-independent attributes on modification. Fixes: 97ba62b ("perf: Add support for SIGTRAP on perf events") Reported-by: Dmitry Vyukov <[email protected]> Signed-off-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Test that PERF_EVENT_IOC_MODIFY_ATTRIBUTES correctly modifies perf_event_attr::sig_data as well. Signed-off-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Link: https://lore.kernel.org/r/[email protected]

…rchitectures Due to the alignment requirements of siginfo_t, as described in 3ddb3fd ("signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures"), siginfo_t::si_perf_data is limited to an unsigned long. However, perf_event_attr::sig_data is an u64, to avoid having to deal with compat conversions. Due to being an u64, it may not immediately be clear to users that sig_data is truncated on 32 bit architectures. Add a comment to explicitly point this out, and hopefully help some users save time by not having to deduce themselves what's happening. Reported-by: Dmitry Vyukov <[email protected]> Signed-off-by: Marco Elver <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 6706384 ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. Fixes: 6706384 ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]

In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_riscv_enter_exit_vcpu() helper which is marked noinstr. Fixes: 99cdc6c ("RISC-V: Add initial skeletal KVM support") Signed-off-by: Mark Rutland <[email protected]> Cc: Albert Ou <[email protected]> Cc: Anup Patel <[email protected]> Cc: Atish Patra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Paul Walmsley <[email protected]> Tested-by: Anup Patel <[email protected]> Signed-off-by: Anup Patel <[email protected]>

Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR. To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI). Fixes: a33c72f ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Cc: [email protected] Signed-off-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]>

The SBI implementation version returned by KVM RISC-V should be the Host Linux version code. Fixes: c62a768 ("RISC-V: KVM: Add SBI v0.2 base extension") Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>

…from TODO list)" This reverts commit b3ec8cd. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.16+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

This reverts commit 39aead8. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Commit ceaa762 ("block: move direct_IO into our own read_iter handler") introduced several regressions for bdev DIO: 1. read spanning EOF always returns 0 instead of the number of bytes read. This is because "count" is assigned early and isn't updated when the iterator is truncated: $ lsblk -o name,size /dev/vdb NAME SIZE vdb 1G $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 0/4194304 bytes at offset 1070596096 0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec) instead of $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 3145728/4194304 bytes at offset 1070596096 3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec) 2. truncated iterator isn't reexpanded 3. iterator isn't reverted on blkdev_direct_IO() error 4. zero size read no longer skips atime update Fixes: ceaa762 ("block: move direct_IO into our own read_iter handler") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

into HEAD KVM/riscv fixes for 5.17, take #1 - Rework guest entry logic - Make CY, TM, and IR counters accessible in VU mode - Fix SBI implementation version

If we're doing an uncached read of the directory, then we ideally want to read only the exact set of entries that will fit in the buffer supplied by the getdents() system call. So unlike the case where we're reading into the page cache, let's send only one READDIR call, before trying to fill up the buffer. Fixes: 35df59d ("NFS: Reduce number of RPC calls when doing uncached readdir") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

Ensure that we initialise desc->cache_entry_index correctly in uncached_readdir(). Fixes: d1bacf9 ("NFS: add readdir cache array") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

If we've reached the end of the directory, then cache that information in the context so that we don't need to do an uncached readdir in order to rediscover that fact. Fixes: 794092c ("NFS: Do uncached readdir when we're seeking a cookie in an empty page cache") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

audit_log_start() returns audit_buffer pointer on success or NULL on error, so it is better to check the return value of it. Fixes: 3323eec ("integrity: IMA as an integrity service provider") Signed-off-by: Xiaoke Wang <[email protected]> Cc: <[email protected]> Reviewed-by: Paul Moore <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>

The removal of ima_dir currently fails since ima_policy still exists, so remove the ima_policy file before removing the directory. Fixes: 4af4662 ("integrity: IMA policy") Signed-off-by: Stefan Berger <[email protected]> Cc: <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>

Commit c2426d2 ("ima: added support for new kernel cmdline parameter ima_template_fmt") introduced an additional check on the ima_template variable to avoid multiple template selection. Unfortunately, ima_template could be also set by the setup function of the ima_hash= parameter, when it calls ima_template_desc_current(). This causes attempts to choose a new template with ima_template= or with ima_template_fmt=, after ima_hash=, to be ignored. Achieve the goal of the commit mentioned with the new static variable template_setup_done, so that template selection requests after ima_hash= are not ignored. Finally, call ima_init_template_list(), if not already done, to initialize the list of templates before lookup_template_desc() is called. Reported-by: Guo Zihua <[email protected]> Signed-off-by: Roberto Sassu <[email protected]> Cc: [email protected] Fixes: c2426d2 ("ima: added support for new kernel cmdline parameter ima_template_fmt") Signed-off-by: Mimi Zohar <[email protected]>

Before printing a policy rule scan for inactive LSM labels in the policy rule. Inactive LSM labels are identified by args_p != NULL and rule == NULL. Fixes: 483ec26 ("ima: ima/lsm policy rule loading logic bug fixes") Signed-off-by: Stefan Berger <[email protected]> Cc: <[email protected]> # v5.6+ Acked-by: Christian Brauner <[email protected]> [[email protected]: Updated "Fixes" tag] Signed-off-by: Mimi Zohar <[email protected]>

The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>

Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>

We're missing the `f` prefix to have python do string interpolation, so we'd never end up printing what the actual "unexpected" error is. Fixes: ee92ed3 ("kunit: add run_checks.py script to validate kunit changes") Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>

Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d ("md: add support for REQ_NOWAIT") Reported-by: Leon Möller <[email protected]> Tested-by: Leon Möller <[email protected]> Cc: Vishal Verma <[email protected]> Signed-off-by: Song Liu <[email protected]>

This will be used to help make decisions on what to do in misconfigured systems. v2: squash in semicolon fix from Stephen Rothwell Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>

1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 00 48 85 ff 74 05 e8 b6 58 a2 e1 0f b7 95 3c f7 [ 846.718026] RSP: 0018:ffffb56dcf85fe70 EFLAGS: 00010202 [ 846.718372] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 846.718725] RDX: 0000000000000001 RSI: 0000000040000001 RDI: 0000000000000000 [ 846.719076] RBP: ffffa0ccc0f20df8 R08: ffffa0ce1fedb118 R09: 000073746e657665 [ 846.719428] R10: 8080808080808080 R11: 0000000000000000 R12: ffffa0ce1fee8700 [ 846.719779] R13: ffffa0ccc0f211a8 R14: ffffa0cd1b902840 R15: ffffa0ccc0f20e00 [ 846.720132] FS: 0000000000000000(0000) GS:ffffa0ce1fec0000(0000) knlGS:0000000000000000 [ 846.720726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.721073] CR2: 00000000000009f8 CR3: 00000008ba00a005 CR4: 00000000007606e0 [ 846.721426] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 846.721778] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 846.722131] PKRU: 55555554 [ 846.722467] Call Trace: [ 846.722814] process_one_work+0x1a7/0x3b0 [ 846.723157] worker_thread+0x30/0x390 [ 846.723501] ? create_worker+0x1a0/0x1a0 [ 846.723844] kthread+0x112/0x130 [ 846.724184] ? kthread_flush_work_fn+0x10/0x10 [ 846.724535] ret_from_fork+0x35/0x40 Now, check whether that ca is NULL in LINE#1655 to fix the issue. Signed-off-by: Linggang Zeng <[email protected]> Signed-off-by: Mingzhe Zou <[email protected]> Signed-off-by: Coly Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice] [...] [ +0.002715] Call Trace: [ +0.002452] <IRQ> [ +0.002021] ? __die_body.cold+0x19/0x29 [ +0.003922] ? die_addr+0x3c/0x60 [ +0.003319] ? exc_general_protection+0x17c/0x400 [ +0.004707] ? asm_exc_general_protection+0x26/0x30 [ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice] [ +0.004835] ice_napi_poll+0x665/0x680 [ice] [ +0.004320] __napi_poll+0x28/0x190 [ +0.003500] net_rx_action+0x198/0x360 [ +0.003752] ? update_rq_clock+0x39/0x220 [ +0.004013] handle_softirqs+0xf1/0x340 [ +0.003840] ? sched_clock_cpu+0xf/0x1f0 [ +0.003925] __irq_exit_rcu+0xc2/0xe0 [ +0.003665] common_interrupt+0x85/0xa0 [ +0.003839] </IRQ> [ +0.002098] <TASK> [ +0.002106] asm_common_interrupt+0x26/0x40 [ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690 Fix this by performing the missing unmapping of XDP queues from q_vectors and setting the XDP rings pointer back to NULL after all those queues are released. Also, add an immediate exit from the XDP callback in case of ring preparation failure. Fixes: efc2214 ("ice: Add support for XDP") Reviewed-by: Dawid Osuchowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Michal Kubiak <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Jesse Brandeburg <[email protected]> Tested-by: Saritha Sanigani <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>

Commit a1e40ac ("net: gso: fix udp gso fraglist segmentation after pull from frag_list") detected invalid geometry in frag_list skbs and redirects them from skb_segment_list to more robust skb_segment. But some packets with modified geometry can also hit bugs in that code. We don't know how many such cases exist. Addressing each one by one also requires touching the complex skb_segment code, which risks introducing bugs for other types of skbs. Instead, linearize all these packets that fail the basic invariants on gso fraglist skbs. That is more robust. If only part of the fraglist payload is pulled into head_skb, it will always cause exception when splitting skbs by skb_segment. For detailed call stack information, see below. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify fraglist skbs, breaking these invariants. In extreme cases they pull one part of data into skb linear. For UDP, this causes three payloads with lengths of (11,11,10) bytes were pulled tail to become (12,10,10) bytes. The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because payload was pulled into head_skb, it needs to be linearized before pass to regular skb_segment. skb_segment+0xcd0/0xd14 __udp_gso_segment+0x334/0x5f4 udp4_ufo_fragment+0x118/0x15c inet_gso_segment+0x164/0x338 skb_mac_gso_segment+0xc4/0x13c __skb_gso_segment+0xc4/0x124 validate_xmit_skb+0x9c/0x2c0 validate_xmit_skb_list+0x4c/0x80 sch_direct_xmit+0x70/0x404 __dev_queue_xmit+0x64c/0xe5c neigh_resolve_output+0x178/0x1c4 ip_finish_output2+0x37c/0x47c __ip_finish_output+0x194/0x240 ip_finish_output+0x20/0xf4 ip_output+0x100/0x1a0 NF_HOOK+0xc4/0x16c ip_forward+0x314/0x32c ip_rcv+0x90/0x118 __netif_receive_skb+0x74/0x124 process_backlog+0xe8/0x1a4 __napi_poll+0x5c/0x1f8 net_rx_action+0x154/0x314 handle_softirqs+0x154/0x4b8 [118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278! [118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000 [118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000 [118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO) [118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14 [118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14 [118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 Fixes: a1e40ac ("gso: fix udp gso fraglist segmentation after pull from frag_list") Signed-off-by: Shiming Cheng <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When driver handles the napi rx polling requests, the netdev might have been released by the dellink logic triggered by the disconnect operation on user plane. However, in the logic of processing skb in polling, an invalid netdev is still being used, which causes a panic. BUG: kernel NULL pointer dereference, address: 00000000000000f1 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:dev_gro_receive+0x3a/0x620 [...] Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)] ? dev_gro_receive+0x3a/0x620 napi_gro_receive+0xad/0x170 t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)] t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)] net_rx_action+0x103/0x470 irq_exit_rcu+0x13a/0x310 sysvec_apic_timer_interrupt+0x56/0x90 </IRQ> Fixes: 5545b7b ("net: wwan: t7xx: Add NAPI support") Signed-off-by: Jinjian Song <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Removing a peer while userspace attempts to close its transport socket triggers a race condition resulting in the following crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000077: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000003b8-0x00000000000003bf] CPU: 12 UID: 0 PID: 162 Comm: kworker/12:1 Tainted: G O 6.15.0-rc2-00635-g521139ac3840 #272 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-20240910_120124-localhost 04/01/2014 Workqueue: events ovpn_peer_keepalive_work [ovpn] RIP: 0010:ovpn_socket_release+0x23c/0x500 [ovpn] Code: ea 03 80 3c 02 00 0f 85 71 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d bc 24 be 03 00 00 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 30 RSP: 0018:ffffc90000c9fb18 EFLAGS: 00010217 RAX: dffffc0000000000 RBX: ffff8881148d7940 RCX: ffffffff817787bb RDX: 0000000000000077 RSI: 0000000000000008 RDI: 00000000000003be RBP: ffffc90000c9fb30 R08: 0000000000000000 R09: fffffbfff0d3e840 R10: ffffffff869f4207 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888115eb9300 R14: ffffc90000c9fbc8 R15: 000000000000000c FS: 0000000000000000(0000) GS:ffff8882b0151000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f37266b6114 CR3: 00000000054a8000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> unlock_ovpn+0x8b/0xe0 [ovpn] ovpn_peer_keepalive_work+0xe3/0x540 [ovpn] ? ovpn_peers_free+0x780/0x780 [ovpn] ? lock_acquire+0x56/0x70 ? process_one_work+0x888/0x1740 process_one_work+0x933/0x1740 ? pwq_dec_nr_in_flight+0x10b0/0x10b0 ? move_linked_works+0x12d/0x2c0 ? assign_work+0x163/0x270 worker_thread+0x4d6/0xd90 ? preempt_count_sub+0x4c/0x70 ? process_one_work+0x1740/0x1740 kthread+0x36c/0x710 ? trace_preempt_on+0x8c/0x1e0 ? kthread_is_per_cpu+0xc0/0xc0 ? preempt_count_sub+0x4c/0x70 ? _raw_spin_unlock_irq+0x36/0x60 ? calculate_sigpending+0x7b/0xa0 ? kthread_is_per_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x80 ? kthread_is_per_cpu+0xc0/0xc0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: ovpn(O) This happens because the peer deletion operation reaches ovpn_socket_release() while ovpn_sock->sock (struct socket *) and its sk member (struct sock *) are still both valid. Here synchronize_rcu() is invoked, after which ovpn_sock->sock->sk becomes NULL, due to the concurrent socket closing triggered from userspace. After having invoked synchronize_rcu(), ovpn_socket_release() will attempt dereferencing ovpn_sock->sock->sk, triggering the crash reported above. The reason for accessing sk is that we need to retrieve its protocol and continue the cleanup routine accordingly. This crash can be easily produced by running openvpn userspace in client mode with `--keepalive 10 20`, while entirely omitting this option on the server side. After 20 seconds ovpn will assume the peer (server) to be dead, will start removing it and will notify userspace. The latter will receive the notification and close the transport socket, thus triggering the crash. To fix the race condition for good, we need to refactor struct ovpn_socket. Since ovpn is always only interested in the sock->sk member (struct sock *) we can directly hold a reference to it, raher than accessing it via its struct socket container. This means changing "struct socket *ovpn_socket->sock" to "struct sock *ovpn_socket->sk". While acquiring a reference to sk, we can increase its refcounter without affecting the socket close()/destroy() notification (which we rely on when userspace closes a socket we are using). By increasing sk's refcounter we know we can dereference it in ovpn_socket_release() without incurring in any race condition anymore. ovpn_socket_release() will ultimately decrease the reference counter. Cc: Oleksandr Natalenko <[email protected]> Fixes: 11851cb ("ovpn: implement TCP transport") Reported-by: Qingfang Deng <[email protected]> Closes: OpenVPN/ovpn-net-next#1 Tested-by: Gert Doering <[email protected]> Link: https://www.mail-archive.com/[email protected]/msg31575.html Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: Antonio Quartulli <[email protected]>

According to OpenMDK, bit 2 of the RGMII register has a different meaning for BCM53115 [1]: "DLL_IQQD 1: In the IDDQ mode, power is down0: Normal function mode" Configuring RGMII delay works without setting this bit, so let's keep it at the default. For other chips, we always set it, so not clearing it is not an issue. One would assume BCM53118 works the same, but OpenMDK is not quite sure what this bit actually means [2]: "BYPASS_IMP_2NS_DEL #1: In the IDDQ mode, power is down#0: Normal function mode1: Bypass dll65_2ns_del IP0: Use dll65_2ns_del IP" So lets keep setting it for now. [1] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h#L19871 [2] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h#L14392 Fixes: 967dd82 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Jonas Gorski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76b ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM. Reported-by: [email protected] Signed-off-by: Ben Dooks <[email protected]> Signed-off-by: Cyril Bur <[email protected]> Reviewed-by: Alexandre Ghiti <[email protected]> Reviewed-by: Deepak Gupta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't check return value of jffs2_prealloc_raw_node_refs and simply lets any error propagate into jffs2_sum_write_data, which eventually calls jffs2_link_node_ref in order to link the summary to an expectedly allocated node. kernel BUG at fs/jffs2/nodelist.c:592! invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 31277 Comm: syz-executor.7 Not tainted 6.1.128-syzkaller-00139-ge10f83ca10a1 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0x570/0x690 fs/jffs2/nodelist.c:592 Call Trace: <TASK> jffs2_sum_write_data fs/jffs2/summary.c:841 [inline] jffs2_sum_write_sumnode+0xd1a/0x1da0 fs/jffs2/summary.c:874 jffs2_do_reserve_space+0xa18/0xd60 fs/jffs2/nodemgmt.c:388 jffs2_reserve_space+0x55f/0xaa0 fs/jffs2/nodemgmt.c:197 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x726/0x15d0 fs/jffs2/file.c:301 generic_perform_write+0x314/0x5d0 mm/filemap.c:3856 __generic_file_write_iter+0x2ae/0x4d0 mm/filemap.c:3973 generic_file_write_iter+0xe3/0x350 mm/filemap.c:4005 call_write_iter include/linux/fs.h:2265 [inline] do_iter_readv_writev+0x20f/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10c/0x170 fs/splice.c:950 splice_direct_to_actor+0x337/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fix this issue by checking return value of jffs2_prealloc_raw_node_refs before calling jffs2_sum_write_data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Cc: [email protected] Fixes: 2f78540 ("[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.") Signed-off-by: Artem Sadovnikov <[email protected]> Reviewed-by: Zhihao Cheng <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>

The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules linked in: hctr2 nhpoly1305_avx2 nhpoly1305_sse2 nhpoly1305 chacha_generic chacha_x86_64 libchacha adiantum libpoly1305 essiv authenc mptcp_diag xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 aesni_intel joydev crypto_simd cryptd rapl input_leds psmouse sch_fq_codel serio_raw bochs i2c_piix4 floppy qemu_fw_cfg i2c_smbus mac_hid pata_acpi msr parport_pc ppdev lp parport efi_pstore ip_tables x_tables [ 878.407319] ---[ end trace 0000000000000000 ]--- [ 878.407775] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.408317] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.410087] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.410609] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.411318] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.412014] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.412735] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.413438] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.414121] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.414935] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.415516] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.416211] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.416907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.417630] PKRU: 55555554 (gdb) l *ceph_msg_data_cursor_init+0x42 0xffffffff823b45a2 is in ceph_msg_data_cursor_init (net/ceph/messenger.c:1070). 1065 1066 void ceph_msg_data_cursor_init(struct ceph_msg_data_cursor *cursor, 1067 struct ceph_msg *msg, size_t length) 1068 { 1069 BUG_ON(!length); 1070 BUG_ON(length > msg->data_length); 1071 BUG_ON(!msg->num_data_items); 1072 1073 cursor->total_resid = length; 1074 cursor->data = msg->data; The issue takes place because of this: [ 202.628853] libceph: net/ceph/messenger_v2.c:2034 prepare_sparse_read_data(): msg->data_length 33792, msg->sparse_read_total 36864 1070 BUG_ON(length > msg->data_length); The generic/397 test (xfstests) executes such steps: (1) create encrypted files and directories; (2) access the created files and folders with encryption key; (3) access the created files and folders without encryption key. The issue takes place in this portion of code: if (IS_ENCRYPTED(inode)) { struct page **pages; size_t page_off; err = iov_iter_get_pages_alloc2(&subreq->io_iter, &pages, len, &page_off); if (err < 0) { doutc(cl, "%llx.%llx failed to allocate pages, %d\n", ceph_vinop(inode), err); goto out; } /* should always give us a page-aligned read */ WARN_ON_ONCE(page_off); len = err; err = 0; osd_req_op_extent_osd_data_pages(req, 0, pages, len, 0, false, false); The reason of the issue is that subreq->io_iter.count keeps unaligned value of length: [ 347.751182] lib/iov_iter.c:1185 __iov_iter_get_pages_alloc(): maxsize 36864, maxpages 4294967295, start 18446659367320516064 [ 347.752808] lib/iov_iter.c:1196 __iov_iter_get_pages_alloc(): maxsize 33792, maxpages 4294967295, start 18446659367320516064 [ 347.754394] lib/iov_iter.c:1015 iter_folioq_get_pages(): maxsize 33792, maxpages 4294967295, extracted 0, _start_offset 18446659367320516064 This patch simply assigns the aligned value to subreq->io_iter.count before calling iov_iter_get_pages_alloc2(). [ idryomov: tag the comment with FIXME to make it clear that it's only a workaround for netfslib not coexisting with fscrypt nicely (this is also noted in another pre-existing comment) ] Cc: David Howells <[email protected]> Cc: [email protected] Fixes: ee4cdf7 ("netfs: Speed up buffered reading") Signed-off-by: Viacheslav Dubeyko <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>

Kernel user spaces accesses to not exported pages in atomic context incorrectly try to resolve the page fault. With debug options enabled call traces like this can be seen: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. Preemption disabled at: [<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0 CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39 Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT Tainted: [W]=WARN Hardware name: IBM 3931 A01 703 (LPAR) Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0 ([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90 INFO: lockdep is turned off. It is not allowed to take the mmap_lock while in atomic context. Therefore handle such a secure storage access fault as if the accessed page is not mapped: the uaccess function will return -EFAULT, and the caller has to deal with this. Usually this means that the access is retried in process context, which allows to resolve the page fault (or in this case export the page). Reviewed-by: Claudio Imbrenda <[email protected]> Acked-by: Alexander Gordeev <[email protected]> Acked-by: Christian Borntraeger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>

There is no disagreement that we should check both ptp->is_virtual_clock and ptp->n_vclocks to check if the ptp virtual clock is in use. However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in ptp_vclock_in_use(), we observe a recursive lock in the call trace starting from n_vclocks_store(). ============================================ WARNING: possible recursive locking detected 6.15.0-rc6 #1 Not tainted -------------------------------------------- syz.0.1540/13807 is trying to acquire lock: ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline] ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415 but task is already holding lock: ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ptp->n_vclocks_mux); lock(&ptp->n_vclocks_mux); *** DEADLOCK *** .... ============================================ The best way to solve this is to remove the logic that checks ptp->n_vclocks in ptp_vclock_in_use(). The reason why this is appropriate is that any path that uses ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater than 0 before unregistering vclocks, and all functions are already written this way. And in the function that uses ptp->n_vclocks, we already get ptp->n_vclocks_mux before unregistering vclocks. Therefore, we need to remove the redundant check for ptp->n_vclocks in ptp_vclock_in_use() to prevent recursive locking. Fixes: 73f3706 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park <[email protected]> Acked-by: Richard Cochran <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

syzbot reports: BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60 Read of size 8 at addr ffff88810de2d2c8 by task a.out/304 CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x670 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? getrusage+0x1109/0x1a60 kasan_report+0xce/0x100 ? getrusage+0x1109/0x1a60 getrusage+0x1109/0x1a60 ? __pfx_getrusage+0x10/0x10 __io_uring_show_fdinfo+0x9fe/0x1790 ? ksys_read+0xf7/0x1c0 ? do_syscall_64+0xa4/0x260 ? vsnprintf+0x591/0x1100 ? __pfx___io_uring_show_fdinfo+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 ? mutex_trylock+0xcf/0x130 ? __pfx_mutex_trylock+0x10/0x10 ? __pfx_show_fd_locks+0x10/0x10 ? io_uring_show_fdinfo+0x57/0x80 io_uring_show_fdinfo+0x57/0x80 seq_show+0x38c/0x690 seq_read_iter+0x3f7/0x1180 ? inode_set_ctime_current+0x160/0x4b0 seq_read+0x271/0x3e0 ? __pfx_seq_read+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __mark_inode_dirty+0x402/0x810 ? selinux_file_permission+0x368/0x500 ? file_update_time+0x10f/0x160 vfs_read+0x177/0xa40 ? __pfx___handle_mm_fault+0x10/0x10 ? __pfx_vfs_read+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? fdget_pos+0x24d/0x4b0 ksys_read+0xf7/0x1c0 ? __pfx_ksys_read+0x10/0x10 ? do_user_addr_fault+0x43b/0x9c0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0f74170fc9 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8 RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9 RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004 RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90 R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 298: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_node_noprof+0xe8/0x330 copy_process+0x376/0x5e00 create_io_thread+0xab/0xf0 io_sq_offload_create+0x9ed/0xf20 io_uring_setup+0x12b0/0x1cc0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 22: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0xc4/0x360 rcu_core+0x5ff/0x19f0 handle_softirqs+0x18c/0x530 run_ksoftirqd+0x20/0x30 smpboot_thread_fn+0x287/0x6c0 kthread+0x30d/0x630 ret_from_fork+0xef/0x1a0 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x33/0x60 kasan_record_aux_stack+0x8c/0xa0 __call_rcu_common.constprop.0+0x68/0x940 __schedule+0xff2/0x2930 __cond_resched+0x4c/0x80 mutex_lock+0x5c/0xe0 io_uring_del_tctx_node+0xe1/0x2b0 io_uring_clean_tctx+0xb7/0x160 io_uring_cancel_generic+0x34e/0x760 do_exit+0x240/0x2350 do_group_exit+0xab/0x220 __x64_sys_exit_group+0x39/0x40 x64_sys_call+0x1243/0x1840 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88810de2cb00 which belongs to the cache task_struct of size 3712 The buggy address is located 1992 bytes inside of freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980) which is caused by the task_struct pointed to by sq->thread being released while it is being used in the function __io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre relase or exit of sq->thread. Fix this by assigning and looking up ->thread under RCU, and grabbing a reference to the task_struct. This ensures that it cannot get released while fdinfo is using it. Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected] Fixes: 3fcb9d1 ("io_uring/sqpoll: statistics of the true utilization of sq threads") Signed-off-by: Penglei Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] [axboe: massage commit message] Signed-off-by: Jens Axboe <[email protected]>

The following kernel Oops was recently reported by Mesa CI: [ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588 [ 800.148619] Mem abort info: [ 800.151402] ESR = 0x0000000096000005 [ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits [ 800.160444] SET = 0, FnV = 0 [ 800.163488] EA = 0, S1PTW = 0 [ 800.166619] FSC = 0x05: level 1 translation fault [ 800.171487] Data abort info: [ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000 [ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight [ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d] [ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d] [ 800.267251] sp : ffffffc080003e60 [ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000 [ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020 [ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158 [ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000 [ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000 [ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c [ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0 [ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980 [ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382 [ 800.341859] Call trace: [ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d] [ 800.349086] v3d_irq+0x124/0x2e0 [v3d] [ 800.352835] __handle_irq_event_percpu+0x58/0x218 [ 800.357539] handle_irq_event+0x54/0xb8 [ 800.361369] handle_fasteoi_irq+0xac/0x240 [ 800.365458] handle_irq_desc+0x48/0x68 [ 800.369200] generic_handle_domain_irq+0x24/0x38 [ 800.373810] gic_handle_irq+0x48/0xd8 [ 800.377464] call_on_irq_stack+0x24/0x58 [ 800.381379] do_interrupt_handler+0x88/0x98 [ 800.385554] el1_interrupt+0x34/0x68 [ 800.389123] el1h_64_irq_handler+0x18/0x28 [ 800.393211] el1h_64_irq+0x64/0x68 [ 800.396603] default_idle_call+0x3c/0x168 [ 800.400606] do_idle+0x1fc/0x230 [ 800.403827] cpu_startup_entry+0x40/0x50 [ 800.407742] rest_init+0xe4/0xf0 [ 800.410962] start_kernel+0x5e8/0x790 [ 800.414616] __primary_switched+0x80/0x90 [ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1) [ 800.424707] ---[ end trace 0000000000000000 ]--- [ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- This issue happens when the file descriptor is closed before the jobs submitted by it are completed. When the job completes, we update the global GPU stats and the per-fd GPU stats, which are exposed through fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv` and its stats were already freed and we can't update the per-fd stats. Therefore, if the file descriptor was already closed, don't update the per-fd GPU stats, only update the global ones. Cc: [email protected] # v6.12+ Reviewed-by: Jose Maria Casanova Crespo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maíra Canal <[email protected]>

As-per the SBI specification, an SBI remote fence operation applies to the entire address space if either: 1) start_addr and size are both 0 2) size is equal to 2^XLEN-1 >From the above, only #1 is checked by SBI SFENCE calls so fix the size parameter check in SBI SFENCE calls to cover #2 as well. Fixes: 13acfec ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests") Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Anup Patel <[email protected]>

Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f3 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <[email protected]> Co-developed-by: Michael Chan <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When building the free space tree with the block group tree feature enabled, we can hit an assertion failure like this: BTRFS info (device loop0 state M): rebuilding free space tree assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1102! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 sp : ffff8000a4ce7600 x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8 x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001 x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160 x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0 x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00 x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0 x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e Call trace: populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P) btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337 btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: f0047182 91178042 528089c3 9771d47b (d4210000) ---[ end trace 0000000000000000 ]--- This happens because we are processing an empty block group, which has no extents allocated from it, there are no items for this block group, including the block group item since block group items are stored in a dedicated tree when using the block group tree feature. It also means this is the block group with the highest start offset, so there are no higher keys in the extent root, hence btrfs_search_slot_for_read() returns 1 (no higher key found). Fix this by asserting 'ret' is 0 only if the block group tree feature is not enabled, in which case we should find a block group item for the block group since it's stored in the extent root and block group item keys are greater than extent item keys (the value for BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively). In case 'ret' is 1, we just need to add a record to the free space tree which spans the whole block group, and we can achieve this by making 'ret == 0' as the while loop's condition. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

@ret

[BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree. Fixes: abed4aa ("btrfs: track the csum, extent, and free space trees in a rb tree") Reported-by: Zhiyu Zhang <[email protected]> Reported-by: Longxing Li <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>

syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d85 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea9 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <[email protected]> Reported-by: John Cheung <[email protected]> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Paul Moore <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

into HEAD KVM/riscv fixes for 6.16, take #1 - Fix the size parameter check in SBI SFENCE calls - Don't treat SBI HFENCE calls as NOPs

This fixes the following problem: [ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30 [ 750.346409] [ T9870] ================================================================== [ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870 [ 750.347705] [ T9870] [ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.348085] [ T9870] Call Trace: [ 750.348086] [ T9870] <TASK> [ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0 [ 750.348106] [ T9870] print_report+0xd1/0x640 [ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210 [ 750.348124] [ T9870] kasan_report+0xe7/0x130 [ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30 [ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.349987] [ T9870] ? do_writepages+0x21f/0x590 [ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350763] [ T9870] ? __smb2_plain_req_init+0x933/0x1090 [cifs] [ 750.350891] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs] [ 750.351008] [ T9870] ? sched_clock_noinstr+0x9/0x10 [ 750.351012] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.351018] [ T9870] ? __pfx_smb2_async_writev+0x10/0x10 [cifs] [ 750.351144] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.351150] [ T9870] ? _raw_spin_unlock+0xe/0x40 [ 750.351154] [ T9870] ? cifs_pick_channel+0x242/0x370 [cifs] [ 750.351275] [ T9870] cifs_issue_write+0x256/0x610 [cifs] [ 750.351554] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.351677] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.351710] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs] [ 750.351740] [ T9870] ? rolling_buffer_append+0x12d/0x440 [netfs] [ 750.351769] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.351798] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.351804] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs] [ 750.351835] [ T9870] ? __pfx_netfs_writepages+0x10/0x10 [netfs] [ 750.351864] [ T9870] ? exit_files+0xab/0xe0 [ 750.351867] [ T9870] ? do_exit+0x148f/0x2980 [ 750.351871] [ T9870] ? do_group_exit+0xb5/0x250 [ 750.351874] [ T9870] ? arch_do_signal_or_restart+0x92/0x630 [ 750.351879] [ T9870] ? exit_to_user_mode_loop+0x98/0x170 [ 750.351882] [ T9870] ? do_syscall_64+0x2cf/0xd80 [ 750.351886] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.351890] [ T9870] do_writepages+0x21f/0x590 [ 750.351894] [ T9870] ? __pfx_do_writepages+0x10/0x10 [ 750.351897] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140 [ 750.351901] [ T9870] __filemap_fdatawrite_range+0xba/0x100 [ 750.351904] [ T9870] ? __pfx___filemap_fdatawrite_range+0x10/0x10 [ 750.351912] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.351916] [ T9870] filemap_write_and_wait_range+0x7d/0xf0 [ 750.351920] [ T9870] cifs_flush+0x153/0x320 [cifs] [ 750.352042] [ T9870] filp_flush+0x107/0x1a0 [ 750.352046] [ T9870] filp_close+0x14/0x30 [ 750.352049] [ T9870] put_files_struct.part.0+0x126/0x2a0 [ 750.352053] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.352058] [ T9870] exit_files+0xab/0xe0 [ 750.352061] [ T9870] do_exit+0x148f/0x2980 [ 750.352065] [ T9870] ? __pfx_do_exit+0x10/0x10 [ 750.352069] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.352072] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0 [ 750.352076] [ T9870] do_group_exit+0xb5/0x250 [ 750.352080] [ T9870] get_signal+0x22d3/0x22e0 [ 750.352086] [ T9870] ? __pfx_get_signal+0x10/0x10 [ 750.352089] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100 [ 750.352101] [ T9870] ? folio_add_lru+0xda/0x120 [ 750.352105] [ T9870] arch_do_signal_or_restart+0x92/0x630 [ 750.352109] [ T9870] ? __pfx_arch_do_signal_or_restart+0x10/0x10 [ 750.352115] [ T9870] exit_to_user_mode_loop+0x98/0x170 [ 750.352118] [ T9870] do_syscall_64+0x2cf/0xd80 [ 750.352123] [ T9870] ? __kasan_check_read+0x11/0x20 [ 750.352126] [ T9870] ? count_memcg_events+0x1b4/0x420 [ 750.352132] [ T9870] ? handle_mm_fault+0x148/0x690 [ 750.352136] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0 [ 750.352140] [ T9870] ? __kasan_check_read+0x11/0x20 [ 750.352143] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100 [ 750.352146] [ T9870] ? irqentry_exit_to_user_mode+0x2e/0x250 [ 750.352151] [ T9870] ? irqentry_exit+0x43/0x50 [ 750.352154] [ T9870] ? exc_page_fault+0x75/0xe0 [ 750.352160] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.352163] [ T9870] RIP: 0033:0x7858c94ab6e2 [ 750.352167] [ T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8. [ 750.352175] [ T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022 [ 750.352179] [ T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2 [ 750.352182] [ T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 750.352184] [ T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000 [ 750.352185] [ T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0 [ 750.352187] [ T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230 [ 750.352191] [ T9870] </TASK> [ 750.352195] [ T9870] [ 750.395206] [ T9870] Allocated by task 9870 on cpu 0 at 750.346406s: [ 750.395523] [ T9870] kasan_save_stack+0x39/0x70 [ 750.395532] [ T9870] kasan_save_track+0x18/0x70 [ 750.395536] [ T9870] kasan_save_alloc_info+0x37/0x60 [ 750.395539] [ T9870] __kasan_slab_alloc+0x9d/0xa0 [ 750.395543] [ T9870] kmem_cache_alloc_noprof+0x13c/0x3f0 [ 750.395548] [ T9870] mempool_alloc_slab+0x15/0x20 [ 750.395553] [ T9870] mempool_alloc_noprof+0x135/0x340 [ 750.395557] [ T9870] smbd_post_send_iter+0x63e/0x3070 [cifs] [ 750.395694] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.395819] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.395950] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.396081] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.396232] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs] [ 750.396359] [ T9870] cifs_issue_write+0x256/0x610 [cifs] [ 750.396492] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.396544] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs] [ 750.396576] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.396608] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs] [ 750.396639] [ T9870] do_writepages+0x21f/0x590 [ 750.396643] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140 [ 750.396647] [ T9870] __filemap_fdatawrite_range+0xba/0x100 [ 750.396651] [ T9870] filemap_write_and_wait_range+0x7d/0xf0 [ 750.396656] [ T9870] cifs_flush+0x153/0x320 [cifs] [ 750.396787] [ T9870] filp_flush+0x107/0x1a0 [ 750.396791] [ T9870] filp_close+0x14/0x30 [ 750.396795] [ T9870] put_files_struct.part.0+0x126/0x2a0 [ 750.396800] [ T9870] exit_files+0xab/0xe0 [ 750.396803] [ T9870] do_exit+0x148f/0x2980 [ 750.396808] [ T9870] do_group_exit+0xb5/0x250 [ 750.396813] [ T9870] get_signal+0x22d3/0x22e0 [ 750.396817] [ T9870] arch_do_signal_or_restart+0x92/0x630 [ 750.396822] [ T9870] exit_to_user_mode_loop+0x98/0x170 [ 750.396827] [ T9870] do_syscall_64+0x2cf/0xd80 [ 750.396832] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.396836] [ T9870] [ 750.397150] [ T9870] The buggy address belongs to the object at ffff888011082800 which belongs to the cache smbd_request_0000000008f3bd7b of size 144 [ 750.397798] [ T9870] The buggy address is located 0 bytes to the right of allocated 144-byte region [ffff888011082800, ffff888011082890) [ 750.398469] [ T9870] [ 750.398800] [ T9870] The buggy address belongs to the physical page: [ 750.399141] [ T9870] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11082 [ 750.399148] [ T9870] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 750.399155] [ T9870] page_type: f5(slab) [ 750.399161] [ T9870] raw: 000fffffc0000000 ffff888022d65640 dead000000000122 0000000000000000 [ 750.399165] [ T9870] raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 [ 750.399169] [ T9870] page dumped because: kasan: bad access detected [ 750.399172] [ T9870] [ 750.399505] [ T9870] Memory state around the buggy address: [ 750.399863] [ T9870] ffff888011082780: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 750.400247] [ T9870] ffff888011082800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 750.400618] [ T9870] >ffff888011082880: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 750.400982] [ T9870] ^ [ 750.401370] [ T9870] ffff888011082900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 750.401774] [ T9870] ffff888011082980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 750.402171] [ T9870] ================================================================== [ 750.402696] [ T9870] Disabling lock debugging due to kernel taint [ 750.403202] [ T9870] BUG: unable to handle page fault for address: ffff8880110a2000 [ 750.403797] [ T9870] #PF: supervisor write access in kernel mode [ 750.404204] [ T9870] #PF: error_code(0x0003) - permissions violation [ 750.404581] [ T9870] PGD 5ce01067 P4D 5ce01067 PUD 5ce02067 PMD 78aa063 PTE 80000000110a2021 [ 750.404969] [ T9870] Oops: Oops: 0003 [#1] SMP KASAN PTI [ 750.405394] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Tainted: G B 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.406510] [ T9870] Tainted: [B]=BAD_PAGE [ 750.406967] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.407440] [ T9870] RIP: 0010:smb_set_sge+0x15c/0x3b0 [cifs] [ 750.408065] [ T9870] Code: 48 83 f8 ff 0f 84 b0 00 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 80 3c 11 00 0f 85 69 01 00 00 49 8d 7c 24 08 <49> 89 04 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f [ 750.409283] [ T9870] RSP: 0018:ffffc90005e2e758 EFLAGS: 00010246 [ 750.409803] [ T9870] RAX: ffff888036c53400 RBX: ffffc90005e2e878 RCX: 1ffff11002214400 [ 750.410323] [ T9870] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff8880110a2008 [ 750.411217] [ T9870] RBP: ffffc90005e2e798 R08: 0000000000000001 R09: 0000000000000400 [ 750.411770] [ T9870] R10: ffff888011082800 R11: 0000000000000000 R12: ffff8880110a2000 [ 750.412325] [ T9870] R13: 0000000000000000 R14: ffffc90005e2e888 R15: ffff88801a4b6000 [ 750.412901] [ T9870] FS: 0000000000000000(0000) GS:ffff88812bc68000(0000) knlGS:0000000000000000 [ 750.413477] [ T9870] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 750.414077] [ T9870] CR2: ffff8880110a2000 CR3: 000000005b0a6005 CR4: 00000000000726f0 [ 750.414654] [ T9870] Call Trace: [ 750.415211] [ T9870] <TASK> [ 750.415748] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.416449] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.417128] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.417685] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.418380] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.419055] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.419624] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.420297] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.420936] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.421456] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.421954] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.422460] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.422948] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.423579] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.424056] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.424813] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.425323] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.425831] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.426548] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.427231] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.427882] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.428909] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.429425] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.429882] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.430345] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.430809] [ T9870] ? do_writepages+0x21f/0x590 [ 750.431239] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.431652] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.432041] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.432586] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.433108] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.433482] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.433855] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.434214] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.434561] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.434903] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.435394] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.435892] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.436388] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.436881] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.437237] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.437579] [ T9870] ? __smb2_plain_req_init+0x933/0x1090 [cifs] [ 750.438062] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs] [ 750.438557] [ T9870] ? sched_clock_noinstr+0x9/0x10 [ 750.438906] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.439293] [ T9870] ? __pfx_smb2_async_writev+0x10/0x10 [cifs] [ 750.439786] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.440143] [ T9870] ? _raw_spin_unlock+0xe/0x40 [ 750.440495] [ T9870] ? cifs_pick_channel+0x242/0x370 [cifs] [ 750.440989] [ T9870] cifs_issue_write+0x256/0x610 [cifs] [ 750.441492] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.441987] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.442387] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs] [ 750.442969] [ T9870] ? rolling_buffer_append+0x12d/0x440 [netfs] [ 750.443376] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.443768] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.444145] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs] [ 750.444541] [ T9870] ? __pfx_netfs_writepages+0x10/0x10 [netfs] [ 750.444936] [ T9870] ? exit_files+0xab/0xe0 [ 750.445312] [ T9870] ? do_exit+0x148f/0x2980 [ 750.445672] [ T9870] ? do_group_exit+0xb5/0x250 [ 750.446028] [ T9870] ? arch_do_signal_or_restart+0x92/0x630 [ 750.446402] [ T9870] ? exit_to_user_mode_loop+0x98/0x170 [ 750.446762] [ T9870] ? do_syscall_64+0x2cf/0xd80 [ 750.447132] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.447499] [ T9870] do_writepages+0x21f/0x590 [ 750.447859] [ T9870] ? __pfx_do_writepages+0x10/0x10 [ 750.448236] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140 [ 750.448595] [ T9870] __filemap_fdatawrite_range+0xba/0x100 [ 750.448953] [ T9870] ? __pfx___filemap_fdatawrite_range+0x10/0x10 [ 750.449336] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.449697] [ T9870] filemap_write_and_wait_range+0x7d/0xf0 [ 750.450062] [ T9870] cifs_flush+0x153/0x320 [cifs] [ 750.450592] [ T9870] filp_flush+0x107/0x1a0 [ 750.450952] [ T9870] filp_close+0x14/0x30 [ 750.451322] [ T9870] put_files_struct.part.0+0x126/0x2a0 [ 750.451678] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.452033] [ T9870] exit_files+0xab/0xe0 [ 750.452401] [ T9870] do_exit+0x148f/0x2980 [ 750.452751] [ T9870] ? __pfx_do_exit+0x10/0x10 [ 750.453109] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.453459] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0 [ 750.453787] [ T9870] do_group_exit+0xb5/0x250 [ 750.454082] [ T9870] get_signal+0x22d3/0x22e0 [ 750.454406] [ T9870] ? __pfx_get_signal+0x10/0x10 [ 750.454709] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100 [ 750.455031] [ T9870] ? folio_add_lru+0xda/0x120 [ 750.455347] [ T9870] arch_do_signal_or_restart+0x92/0x630 [ 750.455656] [ T9870] ? __pfx_arch_do_signal_or_restart+0x10/0x10 [ 750.455967] [ T9870] exit_to_user_mode_loop+0x98/0x170 [ 750.456282] [ T9870] do_syscall_64+0x2cf/0xd80 [ 750.456591] [ T9870] ? __kasan_check_read+0x11/0x20 [ 750.456897] [ T9870] ? count_memcg_events+0x1b4/0x420 [ 750.457280] [ T9870] ? handle_mm_fault+0x148/0x690 [ 750.457616] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0 [ 750.457925] [ T9870] ? __kasan_check_read+0x11/0x20 [ 750.458297] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100 [ 750.458672] [ T9870] ? irqentry_exit_to_user_mode+0x2e/0x250 [ 750.459191] [ T9870] ? irqentry_exit+0x43/0x50 [ 750.459600] [ T9870] ? exc_page_fault+0x75/0xe0 [ 750.460130] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.460570] [ T9870] RIP: 0033:0x7858c94ab6e2 [ 750.461206] [ T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8. [ 750.461780] [ T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022 [ 750.462327] [ T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2 [ 750.462653] [ T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 750.462969] [ T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000 [ 750.463290] [ T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0 [ 750.463640] [ T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230 [ 750.463965] [ T9870] </TASK> [ 750.464285] [ T9870] Modules linked in: siw ib_uverbs ccm cmac nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm ib_core cifs_md4 netfs softdog vboxsf vboxguest cpuid intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_class intel_pmc_ssram_telemetry intel_vsec polyval_clmulni ghash_clmulni_intel sha1_ssse3 aesni_intel rapl i2c_piix4 i2c_smbus joydev input_leds mac_hid sunrpc binfmt_misc kvm_intel kvm irqbypass sch_fq_codel efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock vmw_vmci dmi_sysfs ip_tables x_tables autofs4 hid_generic vboxvideo usbhid drm_vram_helper psmouse vga16fb vgastate drm_ttm_helper serio_raw hid ahci libahci ttm pata_acpi video wmi [last unloaded: vboxguest] [ 750.467127] [ T9870] CR2: ffff8880110a2000 cc: Tom Talpey <[email protected]> cc: [email protected] Reviewed-by: David Howells <[email protected]> Reviewed-by: Tom Talpey <[email protected]> Fixes: c45ebd6 ("cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs") Signed-off-by: Stefan Metzmacher <[email protected]> Signed-off-by: Steve French <[email protected]>

Add a macro CRYPTO_MD5_STATESIZE for the Crypto API export state size of md5 and use that in dm-crypt instead of relying on the size of struct md5_state (the latter is currently undergoing a transition and may shrink). This commit fixes a crash on 32-bit machines: Oops: Oops: 0000 [#1] SMP CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.16.0-rc2+ #993 PREEMPT(full) Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: kcryptd-254:0-1 kcryptd_crypt [dm_crypt] EIP: __crypto_shash_export+0xf/0x90 Code: 4a c1 c7 40 20 a0 b4 4a c1 81 cf 0e 00 04 08 89 78 50 e9 2b ff ff ff 8d 74 26 00 55 89 e5 57 56 53 89 c3 89 d6 8b 00 8b 40 14 <8b> 50 fc f6 40 13 01 74 04 4a 2b 50 14 85 c9 74 10 89 f2 89 d8 ff EAX: 303a3435 EBX: c3007c90 ECX: 00000000 EDX: c3007c38 ESI: c3007c38 EDI: c3007c90 EBP: c3007bfc ESP: c3007bf0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010216 CR0: 80050033 CR2: 303a3431 CR3: 04fbe000 CR4: 00350e90 Call Trace: crypto_shash_export+0x65/0xc0 crypt_iv_lmk_one+0x106/0x1a0 [dm_crypt] Fixes: efd62c8 ("crypto: md5-generic - Use API partial block handling") Reported-by: Milan Broz <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Tested-by: Milan Broz <[email protected]> Closes: https://lore.kernel.org/linux-crypto/[email protected]/T/ Signed-off-by: Mikulas Patocka <[email protected]>

We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <[email protected]> Signed-off-by: Yan Zhai <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Reviewed-by: Michael Chan <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Ido Schimmel says: ==================== seg6: Allow End.X behavior to accept an oif Patches #1-#3 gradually extend the End.X behavior to accept an output interface as an optional argument. This is needed for cases where user space wishes to specify an IPv6 link-local address as the nexthop address. Patch #4 adds test cases to the existing End.X selftest to cover the new functionality. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Subbaraya Sundeep says: ==================== CN20K silicon with mbox support CN20K is the next generation silicon in the Octeon series with various improvements and new features. Along with other changes the mailbox communication mechanism between RVU (Resource virtualization Unit) SRIOV PFs/VFs with Admin function (AF) has also gone through some changes. Some of those changes are - Separate IRQs for mbox request and response/ack. - Configurable mbox size, default being 64KB. - Ability for VFs to communicate with RVU AF instead of going through parent SRIOV PF. Due to more memory requirement due to configurable mbox size, mbox memory will now have to be allocated by - AF (PF0) for communicating with other PFs and all VFs in the system. - PF for communicating with it's child VFs. On previous silicons mbox memory was reserved and configured by firmware. This patch series add basic mbox support for AF (PF0) <=> PFs and PF <=> VFs. AF <=> VFs communication and variable mbox size support will come in later. Patch #1 Supported co-existance of bit encoding PFs and VFs in 16-bit hardware pcifunc format between CN20K silicon and older octeon series. Also exported PF,VF masks and shifts present in mailbox module to all other modules. Patch #2 Added basic mbox operation APIs and structures to support both CN20K and previous version of silicons. Patch #3 This patch adds support for basic mbox infrastructure implementation for CN20K silicon in AF perspective. There are few updates w.r.t MBOX ACK interrupt and offsets in CN20k. Patch #4 Added mbox implementation between NIC PF and AF for CN20K. Patch #5 Added mbox communication support between AF and AF's VFs. Patch #6 This patch adds support for MBOX communication between NIC PF and its VFs. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== ipmr, ip6mr: Allow MC-routing locally-generated MC packets Multicast routing is today handled in the input path. Locally generated MC packets don't hit the IPMR code. Thus if a VXLAN remote address is multicast, the driver needs to set an OIF during route lookup. In practice that means that MC routing configuration needs to be kept in sync with the VXLAN FDB and MDB. Ideally, the VXLAN packets would be routed by the MC routing code instead. To that end, this patchset adds support to route locally generated multicast packets. However, an installation that uses a VXLAN underlay netdevice for which it also has matching MC routes, would get a different routing with this patch. Previously, the MC packets would be delivered directly to the underlay port, whereas now they would be MC-routed. In order to avoid this change in behavior, introduce an IPCB/IP6CB flag. Unless the flag is set, the new MC-routing code is skipped. All this is keyed to a new VXLAN attribute, IFLA_VXLAN_MC_ROUTE. Only when it is set does any of the above engage. In addition to that, and as is the case today with MC forwarding, IPV4_DEVCONF_MC_FORWARDING must be enabled for the netdevice that acts as a source of MC traffic (i.e. the VXLAN PHYS_DEV), so an MC daemon must be attached to the netdevice. When a VXLAN netdevice with a MC remote is brought up, the physical netdevice joins the indicated MC group. This is important for local delivery of MC packets, so it is still necessary to configure a physical netdevice -- the parameter cannot go away. The netdevice would however typically not be a front panel port, but a dummy. An MC daemon would then sit on top of that netdevice as well as any front panel ports that it needs to service, and have routes set up between the two. A way to configure the VXLAN netdevice to take advantage of the new MC routing would be: # ip link add name d up type dummy # ip link add name vx10 up type vxlan id 1000 dstport 4789 \ local 192.0.2.1 group 225.0.0.1 ttl 16 dev d mrcoute # ip link set dev vx10 master br # plus vlans etc. With the following MC routes: (192.0.2.1, 225.0.0.1) iif=d oil=swp1,swp2 # TX route (*, 225.0.0.1) iif=swp1 oil=d,swp2 # RX route (*, 225.0.0.1) iif=swp2 oil=d,swp1 # RX route The RX path has not changed, with the exception of an extra MC hop. Packets are delivered to the front panel port and MC-forwarded to the VXLAN physical port, here "d". Since the port has joined the multicast group, the packets are locally delivered, and end up being processed by the VXLAN netdevice. This patchset is based on earlier patches from Nikolay Aleksandrov and Roopa Prabhu, though it underwent significant changes. Roopa broadly presented the topic on LPC 2019 [0]. Patchset progression: - Patches #1 to #4 add ip_mr_output() - Patches #5 to #10 add ip6_mr_output() - Patch #11 adds the VXLAN bits to enable MR engagement - Patches #12 to #14 prepare selftest libraries - Patch #15 includes a new test suite [0] https://www.youtube.com/watch?v=xlReECfi-uo ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Gustavo Luiz Duarte says: ==================== netconsole: Add support for msgid in sysdata This patch series introduces a new feature to netconsole which allows appending a message ID to the userdata dictionary. If the msgid feature is enabled, the message ID is built from a per-target 32 bit counter that is incremented and appended to every message sent to the target. Example:: echo 1 > "/sys/kernel/config/netconsole/cmdline0/userdata/msgid_enabled" echo "This is message #1" > /dev/kmsg echo "This is message #2" > /dev/kmsg 13,434,54928466,-;This is message #1 msgid=1 13,435,54934019,-;This is message #2 msgid=2 This feature can be used by the target to detect if messages were dropped or reordered before reaching the target. This allows system administrators to assess the reliability of their netconsole pipeline and detect loss of messages due to network contention or temporary unavailability. --- Changes in v3: - Add kdoc documentation for msgcounter. - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Use wrapping_assign_add() to avoid warnings in UBSAN and friends. - Improve documentation to clarify wrapping and distinguish msgid from sequnum. - Rebase and fix conflict in prepare_extradata(). - Link to v1: https://lore.kernel.org/r/[email protected] ==================== Suggested-by: Breno Leitao <[email protected]> Signed-off-by: Gustavo Luiz Duarte <[email protected]> Signed-off-by: David S. Miller <[email protected]>

…upported 6 GHz band With a quite rare chance, RX report might be problematic to make SW think a packet is received on 6 GHz band even if the chip does not support 6 GHz band actually. Since SW won't initialize stuffs for unsupported bands, NULL dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() -> rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it. The following is a crash log for this case. BUG: kernel NULL pointer dereference, address: 0000000000000032 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4) Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024 RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core] Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11 41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45 32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85 RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246 RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011 RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6 RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000 R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4 R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)] __iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)] rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)] rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] Fixes: c6aa9a9 ("wifi: rtw89: add RNR support for 6 GHz scan") Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected]

In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb. BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211] Call Trace: <IRQ> rtl8187_tx_cb+0x116/0x150 [rtl8187] __usb_hcd_giveback_urb+0x9d/0x120 usb_giveback_urb_bh+0xbb/0x140 process_one_work+0x19b/0x3c0 bh_worker+0x1a7/0x210 tasklet_action+0x10/0x30 handle_softirqs+0xf0/0x340 __irq_exit_rcu+0xcd/0xf0 common_interrupt+0x85/0xa0 </IRQ> Tested on RTL8187BvE device. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c1db52b ("rtl8187: Use usb anchor facilities to manage urbs") Signed-off-by: Daniil Dulov <[email protected]> Reviewed-by: Ping-Ke Shih <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected]

While configuring a vxlan tunnel in a system with a i40e NIC driver, I observe the following deadlock: WARNING: possible recursive locking detected 6.16.0-rc2.net-next-6.16_92d87230d899+ #13 Tainted: G E -------------------------------------------- kworker/u256:4/1125 is trying to acquire lock: ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e but task is already holding lock: ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&utn->lock); lock(&utn->lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u256:4/1125: #0: ffff8892910ca158 ((wq_completion)udp_tunnel_nic){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3213) #1: ffffc900244efd30 ((work_completion)(&utn->work)){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3214) #2: ffffffff9a14e290 (rtnl_mutex){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:737) udp_tunnel #3: ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel stack backtrace: Hardware name: Dell Inc. PowerEdge R7525/0YHMCJ, BIOS 2.2.5 04/08/2021 i Call Trace: <TASK> dump_stack_lvl (/home/pabeni/net-next/lib/dump_stack.c:123) print_deadlock_bug (/home/pabeni/net-next/kernel/locking/lockdep.c:3047) validate_chain (/home/pabeni/net-next/kernel/locking/lockdep.c:3901) __lock_acquire (/home/pabeni/net-next/kernel/locking/lockdep.c:5240) lock_acquire.part.0 (/home/pabeni/net-next/kernel/locking/lockdep.c:473 /home/pabeni/net-next/kernel/locking/lockdep.c:5873) __mutex_lock (/home/pabeni/net-next/kernel/locking/mutex.c:604 /home/pabeni/net-next/kernel/locking/mutex.c:747) i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e udp_tunnel_nic_device_sync_by_port (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:230 /home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:249) udp_tunnel __udp_tunnel_nic_device_sync.part.0 (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:292) udp_tunnel udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:742) udp_tunnel process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3243) worker_thread (/home/pabeni/net-next/kernel/workqueue.c:3315 /home/pabeni/net-next/kernel/workqueue.c:3402) kthread (/home/pabeni/net-next/kernel/kthread.c:464) AFAICS all the existing callsites of udp_tunnel_nic_set_port_priv() are already under the utn lock scope, avoid (re-)acquiring it in such a function. Fixes: 1ead750 ("udp_tunnel: remove rtnl_lock dependency") Signed-off-by: Paolo Abeni <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://patch.msgid.link/95a827621ec78c12d1564ec3209e549774f9657d.1750675978.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>

ethtool_notify() takes a const void *data argument, which presumably was intended to pass information from the call site to the subcommand handler. This argument currently has no users. Expecting the data to be subcommand-specific has two complications. Complication #1 is that its not plumbed thru any of the standardized callbacks. It gets propagated to ethnl_default_notify() where it remains unused. Coming from the ethnl_default_set_doit() side we pass in NULL, because how could we have a command specific attribute in a generic handler. Complication #2 is that we expect the ethtool_notify() callers to know what attribute type to pass in. Again, the data pointer is untyped. RSS will need to pass the context ID to the notifications. I think it's a better design if the "subcommand" exports its own typed interface and constructs the appropriate argument struct (which will be req_info). Remove the unused data argument from ethtool_notify() but retain it in a new internal helper which subcommands can use to build a typed interface. Reviewed-by: Maxime Chevallier <[email protected]> Tested-by: Maxime Chevallier <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Dave Chinner and others added 30 commits February 1, 2022 14:14

Merge tag 'kvm-riscv-fixes-5.17-1' of https://github.com/kvm-riscv/linux

cb4f084

into HEAD KVM/riscv fixes for 5.17, take #1 - Rework guest entry logic - Make CY, TM, and IR counters accessible in VU mode - Fix SBI implementation version

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

[test] master_test #1

[test] master_test #1

Uh oh!

kernel-patches-bot commented Feb 15, 2022

Uh oh!

Uh oh!

[test] master_test #1

[test] master_test #1

Uh oh!

Conversation

kernel-patches-bot commented Feb 15, 2022

Uh oh!

Uh oh!