[Flang] Fix performance issue in 549.fotonik3d_r

[kiranchandramohan]

fotonik benchmark performs poorly with Flang. The performance is almost three times slower when compared to other compilers. Investigate the performance issue.

[Leporacanthicus]

So the single sentence answer to this is "we're lacking alias analysis".

Here's a few more words. If someone really wants to have further details, please feel free to ask, and I will try to answer any questions.

With flang compiled from llvm/main, and comparing to two different versions of gfortran (9.4.0 and 13.0 (top of tree) as of a few days ago), the total runtime in 549.fotonik3d_r is around 2.6-3 times slower for Flang than Gfortran, on same hardware platform and using -O3 optimization for both (-Ofast lost a bit of time for the gfortran 13.0, I didn't try -Ofast with the gfortran 9.4 version).

llvm-flang vs gfortran 9.4:

Function	%flang	%gfortran	Relative
material::mat_update	28.08%	26.16%	2.85
UPML::upml_updatee_simple	24.43%	20.64%	3.07
UPML::upml_updateh	22.36%	16.21%	3.67
update::update_h	12.14%	15.28%	2.11
power::power_dft	11.68%	19.1%	1.62

The relative number is calculated based on percentage of total runtime, and llvm-flang time divided by gfortran - so say gfortran ran in 200s, then 26.16% of that would be 52.3s, and the time in the llvm-flang is about 149s (2.85 x 52.3s). These are NOT the actual numbers, just explaining the calculation. Percentage figures are as per perf record/perf report.

There are differences in use of fma type operations and vector operations (Vector operations may get resolved with alias analysis, the former would probably happen with an -Ofast flag available).

Hacking the compiler to use fma aggressively, it gives about 3% overall improvement, so from 2.65 to 2.6 times for the 9.4 - I didn't make this precise comparison with 13.0.

Hacking the ScopedNoAliasAA to always say "no alias", while also using the the "force use of fma", and the 9.4 comparison comes down to 1.23x slower, and 1.37x slower against 13.0.

Function	%flang	%gfortran	Relative
material::mat_update	34.14%	26.16%	1.6
UPML::upml_updatee_simple	17.48%	20.64%	43.3
UPML::upml_updateh	15.91%	16.21%	33.2
update::update_h	15.46%	15.28%	1.25
power::power_dft	14.20%	19.1%	0.91

Same table for 13.0 comparison:

Function	%flang	%gfortran	Relative
material::mat_update	34.14%	23.51%	2.0
UPML::upml_updatee_simple	17.48%	22.14%	1.06
UPML::upml_updateh	15.91%	16.85%	1.30
update::update_h	15.46%	15.63%	1.36
power::power_dft	14.20%	19.1%	1.03

(Note that UPML::upml_updatee in 9.4.0 is inlining UPML::upml_updatee_single, so if you were doing this experiment yourself, you may not see the same names in gfortran as listed above - the inlining strategy for the latest version seems to have changed, so it's no longer inlining the rather large function).

[vzakhari]

I approached this a different way on an x86 CPU, but the conclusion is the same.

I took the innermost loop in the loopnest at line 2228 in UPML::upml_updatee_simple. Initial Flang time is 54.36s for the whole loop nest. I manually added alias.scope/noalias metadata, fast attributes and also nsw/nuw flags for the offsets and loop iv computations (see LLVM IR diff in the attached files). Execution time of the loop nest decreased with each modification:

• Alias metadata - enables innermost loop vectorization: 27.825s
• nsw/nuw - gets rid of redundant integer computations inside the innermost loop: 26.06s
• fast - FMAs: 24.1

There are multiple loop nests like this one in UPML::upml_updatee_simple, so they should all benefit from the same LLVM optimizations, when proper metadata/attributes are provided. UPML::upml_updateh consists of loop nests of the same characteristics.

LLVMIRdiff.zip

[kiranchandramohan]

We need either Full TBAA like classic flang or the full restrict patches to get the benefits in fotonik.

[tblah]

I'm working on classic flang like TBAA here https://discourse.llvm.org/t/rfc-propagate-fir-alias-analysis-information-using-tbaa/73755

[tblah]

TBAA tags are enabled by default, but fotonik is still a bit slower than classic flang so I will leave this ticket open for now.

#73111

[vzakhari]

Hi Tom,

I see performance degradations on 549.fotonik3d (-33%), 437.leslie3d (-168%) and 459.GemsFDTD (-27%) on x86, and 437.leslie3d (-217%) and 459.GemsFDTD (-74%) on aarch64.

I tried 437 with -mllvm -disable-fir-alias-tags on icelake, and performance restored. I am using flang-new -Ofast -march=native.

Are these regressions expected?

[tblah]

Hi Slava,

Thanks for letting me know. No these were not expected. I hadn't tried on x86, but the aarch64 regressions are a big surprise. I will look into this immediately.

Would you like me to revert enabling alias tags by default in the meantime?