OpenLog Hookup Guide
Nate
Toni_K
Resources and Going Further
Now that you've successfully logged data with your OpenLog, you can set up remote projects and monitor all the possible data coming. Consider creating your own Citizen Science project, or even a pet tracker to see what Fluffy does when out and about!
Check out these additional resources for troubleshooting, help, or inspiration for your next project.
- OpenLog GitHub
- Illumitune Project
- LilyPad Light Sensor Hookup
- BadgerHack: Soil Sensor Add-On
- Getting Started with OBD-II
- Vernier Photogate
Need some more inspiration? Check out some of these related tutorials:
MicroSD Shield and SD Breakout Hookup Guide
Adding external storage in the form of an SD or microSD card can be a great addition to any project. Learn how in this hookup guide for the microSD shield and SD breakout boards.
9DoF Razor IMU M0 Hookup Guide
How to use and re-program the 9DoF Razor IMU M0, a combination of ATSAMD21 ARM Cortex-M0 microprocessor and MPU-9250 9DoF-in-a-chip.
MicroMod Weather Carrier Board Hookup Guide
A quick guide to help to create your own MicroMod weather station using the MicroMod Weather Carrier Board and Processor of your choice.
OpenLog Artemis Hookup Guide
How to use and re-program the OpenLog Artemis, an open source datalogger. The OLA comes preprogrammed to automatically log data. The OLA can also record serial data, analog voltages, or readings from external Qwiic-enabled I2C devices. Some of these Qwiic-enabled devices include GPS/GNSS modules, pressure, altitude, humidity, temperature, air quality, environment, distance, and weight sensors.
Or check out these blog posts for ideas.
If you have any tutorial feedback, please visit the comments or contact our technical support team at [email protected].