imitto

Hello all! I use Autoit for a while, already made some automation for a TV station's master control room with it. I made a UDF to easily work with PAL timecode and time with milliseconds, convert, add or subtract them. Feel free to use it if you want something like this #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Res_Description=PAL Timecode Calculator UDF #[email protected] #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ; ; #FUNCTION# ; Name...........: _tcAdd ; Description....: Returns addition of two timecodes ; Syntax.........: _tcAdd($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Sum of the two timecode in the selected format Func _tcAdd($fTc1, $fTc2, $fFormat = "P", $fHourFormat = 1) Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 + $fMs2 Return _msToTc($fSumMs, $fFormat, $fHourFormat) EndFunc ; #FUNCTION# ; Name...........: _tcsSub ; Description....: Returns addition of two timecodes ; Syntax.........: _tcSub($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Subtract $fTc2 from $fTc1 in the source format Func _tcSub($fTc1, $fTc2, $fFormat = "P") Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 - $fMs2 If $fSumMs < 0 Then $fSumMs = _tcToMs("24:00:00.00") - ($fSumMs * -1) EndIf Return _msToTc($fSumMs, $fFormat) EndFunc ; #FUNCTION# ; Name...........: _tcToMs ; Description....: Returns timecode converted to total milliseconds ; Syntax.........: _tcToMs($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: Milliseconds as an integer value Func _tcToMs($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return ($fTemp[4] * 40) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) Case 3 Return ($fTemp[4]) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) EndSwitch EndFunc ; #FUNCTION# ; Name...........: _msToTc ; Description....: Converts total milliseconds to timecode ; Syntax.........: _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) ; ; Parameters.....: $fIn - Time in milliseconds ; $fFormat - Output format "P": PAL TC (default) ; "M": hh:mm:ss.xxx where xxx are milliseconds ; $fHourFormat - Hour format "1": max. value is 23, then starts from 0 (default) ; "0": hours can be more then 23 ; ; Return value...: Timecode as string in the selected format Func _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) Switch $fFormat Case "P" Local $fFr = StringFormat("%02i", (StringRight($fIn, 3) - Mod(StringRight($fIn, 3), 40)) / 40) Case "M" Local $fFr = StringFormat("%03i", StringRight($fIn, 3)) EndSwitch $fIn = StringTrimRight($fIn, 3) Local $fSec = StringFormat("%02i", Mod($fIn, 60)) $fIn -= $fSec Local $fMinTot = $fIn / 60 Local $fMin = StringFormat("%02i", Mod($fMinTot, 60)) $fIn -= $fMin*60 Local $fHourTot = $fIn / 60 / 60 Switch $fHourFormat Case 1 $fHour = StringFormat("%02i", Mod($fHourTot, 24)) Case 0 $fHour = StringFormat("%02i", $fHourTot) EndSwitch Return($fHour & ":" & $fMin & ":" & $fSec & "." & $fFr) EndFunc ; #FUNCTION# ; Name...........: _tcFormatChange ; Description....: Toggle TC format ; Syntax.........: _tcFormatChange($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: PAL timecode or time with milliseconds as string, depends on input Func _tcFormatChange($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%03i", $fTemp[4]*40) Case 3 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%02i", ($fTemp[4]-Mod($fTemp[4], 40))/40) EndSwitch EndFunc And the example script: #include<_PAL_TC_Calc.au3> $palTC1 = "00:01:12.20" $palTC2 = "23:59:50.02" $msTC1 = "00:01:12.800" $msTC2 = "23:59:50.120" MsgBox(0, "1", _tcAdd($palTC1, $palTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "2", _tcAdd($palTC1, $palTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "3", _tcAdd($palTC1, $palTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "4", _tcAdd($msTC1, $msTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "5", _tcAdd($msTC1, $msTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "6", _tcAdd($msTC1, $msTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "7", _tcSub($palTC2, $palTC1)); Subtract $palTC1 from $palTC2, returns PAL TC format MsgBox(0, "8", _tcSub($palTC2, $palTC1, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format MsgBox(0, "9", _tcSub($msTC1, $msTC2)); Subtract $palTC1 from $palTC2, returns PAL TC format - when hits zero, counts back from 24:00:00.00 MsgBox(0, "10", _tcSub($msTC1, $msTC2, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format - when hits zero, counts back from 24:00:00.000 MsgBox(0, "11", _tcFormatChange($palTC2)); Convert PAL TC to time with milliseconds and back MsgBox(0, "12", _tcFormatChange($msTC2)); Convert PAL TC to time with milliseconds and back TC_CALC_example.au3 _PAL_TC_Calc.au3

Hi! I just playing around with _ArrayMin for my next project, but seems like it's not working. I think the code is OK, but I always get the value of $aArray[2][1], not col 2's lowest value (see attached image)

Not working from the shortcut (I set it to run as administrator). It stops in the middle of the first send command, after sending the ALT key, before send "fo" keys. If I run the exe, it works. Any idea?

I think I got it. We have to try it with "Run as admin" checked. I think it's not running in admin mode, so after I disable input devices, autoit can't send the keystrokes. I check it tomorrow morning

Hello all! I was in read-only until today, started to use Autoit 3 weeks ago. It can really make things easy, I really love it I have some script now that works and make our job effective, but I have problems with the latest. It works if I open the script's folder and run the exe directly. If I use the shortcut that I created on the desktop, it's not working properly. Activates the window, but not opening/exporting my files, just opens the last msgbox. I use ftp becouse the PC and the destination PC is not on the same network. Here's the script: #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=..\microsoft_excel.ico #AutoIt3Wrapper_Res_Comment=send file over ftp #AutoIt3Wrapper_Res_Description=send file over ftp for process #AutoIt3Wrapper_Res_Language=1038 #AutoIt3Wrapper_Res_requestedExecutionLevel=requireAdministrator #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: imitto Script Function: Rename and put playlist file on ftp #ce ---------------------------------------------------------------------------- #RequireAdmin #include <File.au3> #include <FileConstants.au3> #include <AutoItConstants.au3> #include <MsgBoxConstants.au3> #include <FTPEx.au3> ; Script Start Global $playlistname=@YEAR&@MON&@MDAY&"-playlist.pll" BlockInput($BI_DISABLE) Opt ("WinTitleMatchMode", 2) WinActivate("MAIN SCHED") WinWaitActive("MAIN SCHED") ;Opt ("WinTitleMatchMode", 1) Send("!fo") WinWaitActive("Open") Send("Z:\playlist\"&$playlistname&"{ENTER}") Sleep(2000) Send("!fe") WinWaitActive("MCon") Send("{ENTER}") WinWaitActive("Save") Send("C:\sendFileForXLS\lista.txt{ENTER}") Sleep(500) Send("!fc") BlockInput($BI_ENABLE) Sleep(50) Opt ("WinTitleMatchMode", 1) Local $hOpen = _FTP_Open('MyFTP Control') $ftp=_FTP_Connect($hOpen, "**********", "******", "******") If @error Then MsgBox($MB_SYSTEMMODAL, '_FTP_Connect', 'ERROR=' & @error) Else _FTP_FilePut($ftp, @ScriptDir&"\lista.txt", "/lista.txt") EndIf Local $iFtpc = _FTP_Close($hOpen) FileDelete(@ScriptDir&"\lista.txt") MsgBox(0, "", "Playlist exported", 2) Exit