Introduction To Subnetting
Last Updated :
07 Feb, 2025
Subnetting is the process of dividing a large network into smaller networks called "subnets." Subnets provide each group of devices with their own space to communicate, which ultimately helps the network to work easily. This also boosts security and makes it easier to manage the network, as each subnet can be monitored and controlled separately. In this article, we will discuss Subnetting in detail.
Introduction to Subnet
A subnet is like a smaller group within a large network. It is a way to split a large network into smaller networks so that devices present in one network can transmit data more easily. For example, in a company, different departments can each have their own subnet, keeping their data traffic separate from others. Subnet makes the network faster and easier to manage and also improves the security of the network.
Why Subnetting is Important?
Let's consider a company that follows classful addressing, it has a Class C network (192.168.1.0/24) with 256 IP addresses. It has three departments:
- Sales: 20 devices
- HR: 10 devices
- IT: 50 devices
Without subnetting, all departments share the same network, and all 256 IP addresses are available to everyone, which leads to:
- IP Waste: Only 80 devices are needed (20 + 10 + 50), but all 256 addresses are allocated, wasting 176 addresses.
- Performance Issues: Since all departments are on the same network, any data sent between devices floods the entire network, slowing communication for everyone. For example, heavy data transfer in IT can impact Sales and HR.
- Security Risks: Without subnets, anyone in Sales can access HR or IT devices, exposing sensitive data like payroll systems.
With Subnetting, we split the network into three subnets, allocating just enough IP addresses for each department:
- Sales: 192.168.1.0/27 → 32 IPs (for 20 devices, 12 spare)
- HR: 192.168.1.32/28 → 16 IPs (for 10 devices, 6 spare)
- IT: 192.168.1.48/26 → 64 IPs (for 50 devices, 14 spare)
By subnetting, we:
- Save IP addresses (Efficiency): Only 112 addresses are used (80 + some spare), leaving 144 unused for future growth.
- Keep networks faster (Better Performance): Data within each department stays in its subnet. For example, HR traffic stays in HR, reducing network congestion for Sales and IT.
- Protect sensitive data (Improved Security): Each department is isolated. If someone in Sales tries to access HR systems, subnet restrictions block them.
Key Concepts in Subnetting
IP Addressing
An IP address is made up of different parts, each serving a specific purpose in identifying a device on a network. An IPv4 address consists of four parts called "octets," separated by dots (e.g., 192.168.1.1). It has two main sections:
- Network Portion: Identifies the network the device belongs to.
- Host Portion: Uniquely identifies a device within the network.
IPv4 addresses are divided into classes based on the length of the network and host portions:
- Class A: 8-bit network ID, 24-bit host ID.
- Class B: 16-bit network ID, 16-bit host ID.
- Class C: 24-bit network ID, 8-bit host ID.
For more details, refer to Classful IP Addressing.
What is a Subnet Mask?
A subnet mask is a 32-bit number used in IP addressing to separate the network portion of an IP address from the host portion. It helps computers and devices determine which part of an IP address refers to the network they are present, and which part refers to their specific location or address within that network.
CIDR Notation: A Simplified Approach to Subnetting
Instead of using a long subnet mask (e.g., 255.255.255.0), CIDR uses a simple format like /24. The number after the slash (/n) represents the number of bits used for the network portion of the IP address.
How Subnetting Works?
The working of subnets starts in such a way that firstly it divides the subnets into smaller subnets. For communicating between subnets, routers are used. Each subnet allows its linked devices to communicate with each other. Subnetting for a network should be done in such a way that it does not affect the network bits.
In class C the first 3 octets are network bits so it remains as it is.
- For Subnet-1: The first bit which is chosen from the host id part is zero and the range will be from (193.1.2.00000000 till you get all 1's in the host ID part i.e, 193.1.2.01111111) except for the first bit which is chosen zero for subnet id part.
Thus, the range of subnet 1 is: 193.1.2.0 to 193.1.2.127
Subnet id of Subnet-1 is : 193.1.2.0
The direct Broadcast id of Subnet-1 is: 193.1.2.127
The total number of hosts possible is: 126 (Out of 128, 2 id's are used for Subnet id & Direct Broadcast id)
The subnet mask of Subnet- 1 is: 255.255.255.128
- For Subnet-2: The first bit chosen from the host id part is one and the range will be from (193.1.2.100000000 till you get all 1's in the host ID part i.e, 193.1.2.11111111).
Thus, the range of subnet-2 is: 193.1.2.128 to 193.1.2.255
Subnet id of Subnet-2 is : 193.1.2.128
The direct Broadcast id of Subnet-2 is: 193.1.2.255
The total number of hosts possible is: 126 (Out of 128, 2 id's are used for Subnet id & Direct Broadcast id)
The subnet mask of Subnet- 2 is: 255.255.255.128
The best way to find out the subnet mask of a subnet is to set the fixed bit of host-id to 1 and the rest to 0.
Finally, after using the subnetting the total number of usable hosts is reduced from 254 to 252.
Note:
- To divide a network into four (2 2 ) parts you need to choose two bits from the host id part for each subnet i.e, (00, 01, 10, 11).
- To divide a network into eight (2 3 ) parts you need to choose three bits from the host id part for each subnet i.e, (000, 001, 010, 011, 100, 101, 110, 111) and so on.
- We can say that if the total number of subnets in a network increases the total number of usable hosts decreases.
The network can be divided into two parts: To divide a network into two parts, you need to choose one bit for each Subnet from the host ID part.
In the above diagram, there are two Subnets.
Note: It is a class C IP so, there are 24 bits in the network id part and 8 bits in the host id part.
Example 1: An organization is assigned a class C network address of 201.35.2.0. It uses a netmask of 255.255.255.192 to divide this into sub-networks. Which of the following is/are valid host IP addresses?
- 201.35.2.129
- 201.35.2.191
- 201.35.2.255
- Both (A) and (C)
Solution:
Converting the last octet of the netmask into the binary form: 255.255.255.11000000
Converting the last octet of option 1 into the binary form: 201.35.2.10000001
Converting the last octet of option 2 into the binary form: 201.35.2.10111111
Converting the last octet of option 3 into the binary form: 201.35.2.11111111
From the above, we see that Options 2 and 3 are not valid host IP addresses (as they are broadcast addresses of a subnetwork), and OPTION 1 is not a broadcast address and it can be assigned to a host IP.
Example 2: An organization has a class C network address of 201.32.64.0. It uses a subnet mask of 255.255.255.248. Which of the following is NOT a valid broadcast address for any subnetworks?
- 201.32.64.135
- 201.32.64.240
- 201.32.64.207
- 201.32.64.231
Solution:
Converting the last octet of the netmask into the binary form: 255.255.255.11111000
Converting the last octet of option 1 into the binary form: 201.32.64.10000111
Converting the last octet of option 2 into the binary form: 201.32.64.11110000
Converting the last octet of option 3 into the binary form: 201.32.64.11001111
Converting the last octet of option 4 into the binary form: 201.32.64.11100111
From the above, we can see that in OPTION 1, 3, and 4, all the host bits are 1 and give the valid broadcast address of subnetworks.
and OPTION 2, the last three bits of the Host address are not 1 therefore it's not a valid broadcast address.
Advantages of Subnetting
- It provides security to one network from another network. For example: In an Organization, the code of the Developer department must not be accessed by another department.
- It may be possible that a particular subnet might need higher network priority than others. For example, a Sales department needs to host webcasts or video conferences.
- In the case of Small networks, maintenance is easy.
Disadvantages of Subnetting
- In the case of a single network, only three steps are required to reach a Process i.e Source Host to Destination Network, Destination Network to Destination Host, and then Destination Host to Process.
- In the case of a Single Network only two IP addresses are wasted to represent Network Id and Broadcast address but in the case of Subnetting two IP addresses are wasted for each Subnet.
- The cost of the overall Network also increases. Subnetting requires internal routers, Switches, Hubs, Bridges, etc. which are very costly.
To learn all the basic to advanced subnetting concepts, refer to Subnet Mask Cheat Sheet.
Similar Reads
Computer Network Tutorial A Computer Network is a system where two or more devices are linked together to share data, resources and information. These networks can range from simple setups, like connecting two devices in your home, to massive global systems, like the Internet. Below are the main components of a computer netw
7 min read
Computer Network Basics
Basics of Computer NetworkingA computer network is a collection of interconnected devices that share resources and information. These devices can include computers, servers, printers, and other hardware. Networks allow for the efficient exchange of data, enabling various applications such as email, file sharing, and internet br
14 min read
Types of Computer NetworksA computer network is a system that connects many independent computers to share information (data) and resources. The integration of computers and other different devices allows users to communicate more easily. It is a collection of two or more computer systems that are linked together. A network
11 min read
Introduction to InternetComputers and their structures are tough to approach, and it is made even extra tough when you want to recognize phrases associated with the difficulty this is already utilized in regular English, Network, and the net will appear to be absolutely wonderful from one some other, however, they may seem
10 min read
Types of Network TopologyNetwork topology refers to the arrangement of different elements like nodes, links, or devices in a computer network. Common types of network topology include bus, star, ring, mesh, and tree topologies, each with its advantages and disadvantages. In this article, we will discuss different types of n
12 min read
Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)Network devices are physical devices that allow hardware on a computer network to communicate and interact with each other. Network devices like hubs, repeaters, bridges, switches, routers, gateways, and brouter help manage and direct data flow in a network. They ensure efficient communication betwe
9 min read
What is OSI Model? - Layers of OSI ModelThe OSI (Open Systems Interconnection) Model is a set of rules that explains how different computer systems communicate over a network. OSI Model was developed by the International Organization for Standardization (ISO). The OSI Model consists of 7 layers and each layer has specific functions and re
13 min read
TCP/IP ModelThe TCP/IP model (Transmission Control Protocol/Internet Protocol) is a four-layer networking framework that enables reliable communication between devices over interconnected networks. It provides a standardized set of protocols for transmitting data across interconnected networks, ensuring efficie
7 min read
Difference Between OSI Model and TCP/IP ModelData communication is a process or act in which we can send or receive data. Understanding the fundamental structures of networking is crucial for anyone working with computer systems and communication. For data communication two models are available, the OSI (Open Systems Interconnection) Model, an
5 min read
Physical Layer
Physical Layer in OSI ModelThe physical Layer is the bottom-most layer in the Open System Interconnection (OSI) Model which is a physical and electrical representation of the system. It consists of various network components such as power plugs, connectors, receivers, cable types, etc. The physical layer sends data bits from
4 min read
Types of Network TopologyNetwork topology refers to the arrangement of different elements like nodes, links, or devices in a computer network. Common types of network topology include bus, star, ring, mesh, and tree topologies, each with its advantages and disadvantages. In this article, we will discuss different types of n
12 min read
Transmission Modes in Computer Networks (Simplex, Half-Duplex and Full-Duplex)Transmission modes also known as communication modes, are methods of transferring data between devices on buses and networks designed to facilitate communication. They are classified into three types: Simplex Mode, Half-Duplex Mode, and Full-Duplex Mode. In this article, we will discuss Transmission
6 min read
Types of Transmission MediaTransmission media is the physical medium through which data is transmitted from one device to another within a network. These media can be wired or wireless. The choice of medium depends on factors like distance, speed, and interference. In this article, we will discuss the transmission media. In t
9 min read
Data Link Layer
Data Link Layer in OSI ModelThe data link layer is the second layer from the bottom in the OSI (Open System Interconnection) network architecture model. It is responsible for the node-to-node delivery of data within the same local network. Its major role is to ensure error-free transmission of information. DLL is also responsi
5 min read
What is Switching?Switching is the process of transferring data packets from one device to another in a network, or from one network to another, using specific devices called switches. A computer user experiences switching all the time for example, accessing the Internet from your computer device, whenever a user req
5 min read
Virtual LAN (VLAN)Virtual LAN (VLAN) is a concept in which we can divide the devices logically on layer 2 (data link layer). Generally, layer 3 devices divide the broadcast domain but the broadcast domain can be divided by switches using the concept of VLAN. A broadcast domain is a network segment in which if a devic
7 min read
Framing in Data Link LayerFrames are the units of digital transmission, particularly in computer networks and telecommunications. Frames are comparable to the packets of energy called photons in the case of light energy. Frame is continuously used in Time Division Multiplexing process. Framing is a point-to-point connection
6 min read
Error Control in Data Link LayerData-link layer uses the techniques of error control simply to ensure and confirm that all the data frames or packets, i.e. bit streams of data, are transmitted or transferred from sender to receiver with certain accuracy. Using or providing error control at this data link layer is an optimization,
4 min read
Flow Control in Data Link LayerFlow control is design issue at Data Link Layer. It is a technique that generally observes the proper flow of data from sender to receiver. It is very essential because it is possible for sender to transmit data or information at very fast rate and hence receiver can receive this information and pro
4 min read
Piggybacking in Computer NetworksPiggybacking is the technique of delaying outgoing acknowledgment temporarily and attaching it to the next data packet. When a data frame arrives, the receiver waits and does not send the control frame (acknowledgment) back immediately. The receiver waits until its network layer moves to the next da
5 min read
Network Layer
Network Layer in OSI ModelThe Network Layer is the 5th Layer from the top and the 3rd layer from the Bottom of the OSI Model. It is one of the most important layers which plays a key role in data transmission. The main job of this layer is to maintain the quality of the data and pass and transmit it from its source to its de
5 min read
Introduction of Classful IP AddressingAn IP address is an address that has information about how to reach a specific host, especially outside the LAN. An IP address is a 32-bit unique address having an address space of 232.Classful IP addressing is a way of organizing and managing IP addresses, which are used to identify devices on a ne
11 min read
Classless Addressing in IP AddressingThe Network address identifies a network on the internet. Using this, we can find a range of addresses in the network and total possible number of hosts in the network. Mask is a 32-bit binary number that gives the network address in the address block when AND operation is bitwise applied on the mas
7 min read
What is an IP Address?Imagine every device on the internet as a house. For you to send a letter to a friend living in one of these houses, you need their home address. In the digital world, this home address is what we call an IP (Internet Protocol) Address. It's a unique string of numbers separated by periods (IPv4) or
14 min read
IPv4 Datagram HeaderIP stands for Internet Protocol and v4 stands for Version Four (IPv4). IPv4 was the primary version brought into action for production within the ARPANET in 1983. IP version four addresses are 32-bit integers which will be expressed in decimal notation. In this article, we will discuss about IPv4 da
4 min read
Difference Between IPv4 and IPv6In the digital world, where billions of devices connect and communicate, Internet Protocol (IP) Addresses play a crucial role. These addresses are what allow devices to identify and locate each other on a network.To know all about IP Addresses - refer to What is an IP Address?Currently, there are tw
9 min read
Difference between Private and Public IP addressesIP Address or Internet Protocol Address is a type of address that is required to communicate one computer with another computer for exchanging information, file, webpage, etc. Public and Private IP address are two important parts of device identity. In this article, we will see the differences betwe
6 min read
Introduction To SubnettingSubnetting is the process of dividing a large network into smaller networks called "subnets." Subnets provide each group of devices with their own space to communicate, which ultimately helps the network to work easily. This also boosts security and makes it easier to manage the network, as each sub
8 min read
What is Routing?The process of choosing a path across one or more networks is known as Network Routing. Nowadays, individuals are more connected on the internet and hence, the need to use Routing Communication is essential.Routing chooses the routes along which Internet Protocol (IP) packets get from their source t
10 min read
Network Layer ProtocolsNetwork Layer is responsible for the transmission of data or communication from one host to another host connected in a network. Rather than describing how data is transferred, it implements the technique for efficient transmission. In order to provide efficient communication protocols are used at t
9 min read
Transport Layer
Session Layer & Presentation Layer
Session Layer in OSI modelThe Session Layer is the 5th layer in the Open System Interconnection (OSI) model which plays an important role in controlling the dialogues (connections) between computers. This layer is responsible for setting up, coordinating, and terminating conversations, exchanges, and dialogues between the ap
6 min read
Presentation Layer in OSI modelPresentation Layer is the 6th layer in the Open System Interconnection (OSI) model. This layer is also known as Translation layer, as this layer serves as a data translator for the network. The data which this layer receives from the Application Layer is extracted and manipulated here as per the req
4 min read
Secure Socket Layer (SSL)SSL or Secure Sockets Layer, is an Internet security protocol that encrypts data to keep it safe. It was created by Netscape in 1995 to ensure privacy, authentication, and data integrity in online communications. SSL is the older version of what we now call TLS (Transport Layer Security).Websites us
10 min read
PPTP Full Form - Point-to-Point Tunneling ProtocolPPTP Stands for Point-to-Point Tunneling Protocol is a widely used networking protocol designed to create a secure private connection over a public network like the internet. It is Developed by Microsoft and other tech companies in the 1990s It is one of the first protocols used for Virtual Private
5 min read
Multipurpose Internet Mail Extension (MIME) ProtocolMIME (Multipurpose Internet Mail Extensions) is a standard used to extend the format of email messages, allowing them to include more than just text. It enables the transmission of multimedia content such as images, audio, video, and attachments, within email messages, as well as other types of cont
4 min read
Application Layer
Application Layer in OSI ModelThe Application Layer of OSI (Open System Interconnection) model, is the top layer in this model and takes care of network communication. The application layer provides the functionality to send and receive data from users. It acts as the interface between the user and the application. The applicati
5 min read
Client-Server ModelThe Client-Server Model is a distributed application architecture that divides tasks or workloads between servers (providers of resources or services) and clients (requesters of those services). In this model, a client sends a request to a server for data, which is typically processed on the server
6 min read
World Wide Web (WWW)The World Wide Web (WWW), often called the Web, is a system of interconnected webpages and information that you can access using the Internet. It was created to help people share and find information easily, using links that connect different pages together. The Web allows us to browse websites, wat
6 min read
Introduction to Electronic MailIntroduction:Electronic mail, commonly known as email, is a method of exchanging messages over the internet. Here are the basics of email:An email address: This is a unique identifier for each user, typically in the format of [email protected] email client: This is a software program used to send,
4 min read
What is a Content Distribution Network and how does it work?Over the last few years, there has been a huge increase in the number of Internet users. YouTube alone has 2 Billion users worldwide, while Netflix has over 160 million users. Streaming content to such a wide demographic of users is no easy task. One can think that a straightforward approach to this
4 min read
Protocols in Application LayerThe Application Layer is the topmost layer in the Open System Interconnection (OSI) model. This layer provides several ways for manipulating the data which enables any type of user to access the network with ease. The Application Layer interface directly interacts with the application and provides c
7 min read
Advanced Topics
What is Network Security?Every company or organization that handles a large amount of data, has a degree of solutions against many cyber threats. This is a broad, all-encompassing phrase that covers software and hardware solutions, as well as procedures, guidelines, and setups for network usage, accessibility, and general t
10 min read
Computer Network | Quality of Service and MultimediaQuality of Service (QoS) is an important concept, particularly when working with multimedia applications. Multimedia applications, such as video conferencing, streaming services, and VoIP (Voice over IP), require certain bandwidth, latency, jitter, and packet loss parameters. QoS methods help ensure
7 min read
Authentication in Computer NetworkPrerequisite - Authentication and Authorization Authentication is the process of verifying the identity of a user or information. User authentication is the process of verifying the identity of a user when that user logs in to a computer system. There are different types of authentication systems wh
4 min read
Encryption, Its Algorithms And Its FutureEncryption plays a vital role in today’s digital world, serving a major role in modern cyber security. It involves converting plain text into cipher text, ensuring that sensitive information remains secure from unauthorized access. By making data unreadable to unauthorized parties, encryption helps
10 min read
Introduction of Firewall in Computer NetworkA firewall is a network security device either hardware or software-based which monitors all incoming and outgoing traffic and based on a defined set of security rules it accepts, rejects, or drops that specific traffic. It acts like a security guard that helps keep your digital world safe from unwa
10 min read
MAC Filtering in Computer NetworkThere are two kinds of network Adapters. A wired adapter allows us to set up a connection to a modem or router via Ethernet in a computer whereas a wireless adapter identifies and connects to remote hot spots. Each adapter has a distinct label known as a MAC address which recognizes and authenticate
10 min read
Wi-Fi Standards ExplainedWi-Fi stands for Wireless Fidelity, and it is developed by an organization called IEEE (Institute of Electrical and Electronics Engineers) they set standards for the Wi-Fi system. Each Wi-Fi network standard has two parameters : Speed - This is the data transfer rate of the network measured in Mbps
4 min read
What is Bluetooth?Bluetooth is used for short-range wireless voice and data communication. It is a Wireless Personal Area Network (WPAN) technology and is used for data communications over smaller distances. This generation changed into being invented via Ericson in 1994. It operates within the unlicensed, business,
6 min read
Generations of wireless communicationWe have made very huge improvements in wireless communication and have expanded the capabilities of our wireless communication system. We all have seen various generations in our life. Let's discuss them one by one. 0th Generation: Pre-cell phone mobile telephony technology, such as radio telephones
2 min read
Cloud NetworkingCloud Networking is a service or science in which a company’s networking procedure is hosted on a public or private cloud. Cloud Computing is source management in which more than one computing resources share an identical platform and customers are additionally enabled to get entry to these resource
11 min read
Practice
Top 50 Plus Networking Interview Questions and Answers for 2024Networking is defined as connected devices that may exchange data or information and share resources. A computer network connects computers to exchange data via a communication media. Computer networking is the most often asked question at leading organizations such Cisco, Accenture, Uber, Airbnb, G
15+ min read
Top 50 TCP/IP Interview Questions and Answers 2025Understanding TCP/IP is essential for anyone working in IT or networking. It's a fundamental part of how the internet and most networks operate. Whether you're just starting or you're looking to move up in your career, knowing TCP/IP inside and out can really give you an edge.In this interview prepa
15+ min read
Top 50 IP Addressing Interview Questions and AnswersIn today’s digital age, every device connected to the internet relies on a unique identifier called an IP Address. If you’re aiming for a career in IT or networking, mastering the concept of IP addresses is crucial. In this engaging blog post, we’ll explore the most commonly asked IP address intervi
15+ min read
Last Minute Notes for Computer NetworksComputer Networks is an important subject in the GATE Computer Science syllabus. It encompasses fundamental concepts like Network Models, Routing Algorithms, Congestion Control, TCP/IP Protocol Suite, and Network Security. These topics are essential for understanding how data is transmitted, managed
14 min read
Computer Network - Cheat SheetA computer network is an interconnected computing device that can exchange data and share resources. These connected devices use a set of rules called communication protocols to transfer information over physical or wireless technology. Modern networks offer more than just connectivity. Enterprises
15+ min read