Integers | Definition, Examples & Types
Last Updated :
23 Jul, 2025
The word integer originated from the Latin word “Integer” which means whole or intact. Integers are a special set of numbers comprising zero, positive numbers, and negative numbers. So, an integer is a whole number (not a fractional number) that can be positive, negative, or zero.
Examples of integers are -7, 1, 3, -78, 56, and 300. Examples of numbers that are not integers are -1.4, 5/2, 9.23, 0.9, 3/7.
In this article, we have covered everything about integers in maths, types of integers, examples, rules & arithmetic operations on integers.
IntegersIntegers Definition
Integers are a fundamental concept in mathematics, representing a set of whole numbers that includes both positive and negative numbers, along with zero. Its symbol is "Z".
If a set is constructed using all-natural numbers, zero, and negative natural numbers, then that set is referred to as Integer. Integers range from negative infinity to positive infinity.
- Natural Numbers: Numbers greater than zero are called positive numbers. Example: 1, 2, 3, 4...
- Negative of Natural Numbers: Numbers less than zero are called negative numbers. Example: -1, -2, -3, -4...
- Zero (0) is neither positive nor negative.
Symbol of Integers
Set of integers is represented by the letter Z as shown below:
Z = {... -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7...}
Types of Integers
Integers are classified into three categories:
- Zero (0)
- Positive Integers (i.e. Natural numbers)
- Negative Integers (i.e. Additive inverses of Natural Numbers)
Zero
Zero is a unique number that does not belong to the category of positive or negative integers. It is considered a neutral number and is represented as "0" without any plus or minus sign.
Positive Integers
Positive integers, also known as natural numbers or counting numbers, are often represented as Z+. Positioned to the right of zero on the number line, these integers encompass the realm of numbers greater than zero.
Z+ → 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,….
Negative Integers
Negative integers mirror the values of natural numbers but with opposing signs. They are symbolized as Z–. Positioned to the left of zero on the number line, these integers form a collection of numbers less than zero.
Z– → -1, -2, -3, -4, -5, -6, -7, -8, -9, -10, -11, -12, -13, -14, -15, -16, -17, -18, -19, -20, -21, -22, -23, -24, -25, -26, -27, -28, -29, -30,…..
Integers on a Number Line
As we have discussed previously, it is possible to visually represent the three categories of integers - positive, negative, and zero - on a number line.
Zero serves as the midpoint for integers on the number line. Positive integers occupy the right side of zero, while negative integers populate the left side. Refer to the diagram below for a visual representation.

Rules of Integers
Various rules of integers are,
- Addition of Positive Integers: When two positive integers are added together, the result is always an integer.
- Addition of Negative Integers: Sum of two negative integers results in an integer.
- Multiplication of Positive Integers: Product of two positive integers yields an integer.
- Multiplication of Negative Integers: When two negative integers are multiplied, the outcome is an integer.
- Sum of an Integer and Its Inverse: Sum of integer and its inverse is alays zero.
- Product of an Integer and Its Reciprocal: Product of an Integer and Its Reciprocal is always 1.
Arithmetic Operations on Integers
Four basic Maths operations performed on integers are:
Addition of Integers
Addition of integers is similar to finding the sum of two integers. Read the rules discussed below to find the sum of integers.
Example: Add the given integers
Subtraction of Integers
Subtraction of integers is similar to finding the difference between two integers. Read the rules discussed below to find the difference between integers.
Example: Add the given integers
- (-5) - (-11) = -5 + 11 = 6
Multiplication of Integers
Multiplication of integers is achieved by following the rule:
- When both integers have same sign, the product is positive.
- When both integers have different signs, the product is negative.
Product of Sign | Resultant Sign | Example |
---|
(+) × (+) | + | 9 × 3 = 27 |
(+) × (–) | - | 9 × (-3) = -27 |
(–) × (+) | - | (-9) × 3 = -27 |
(–) × (–) | + | (-9) × (-3) = 27 |
Division of Integers
Division of integers is achieved by following the rule:
- When both integers have the same sign, the division is positive.
- When both integers have different signs, the division is negative.
Division of Sign | Resultant Sign | Example |
---|
(+) ÷ (+) | + | 9 ÷ 3 = 3 |
(+) ÷ (–) | - | 9 ÷ (-3) = -3 |
(–) ÷ (+) | - | (-9) ÷ 3 = -3 |
(–) ÷ (–) | + | (-9) ÷ (-3) = 3 |
Properties of Integers
Integers have various properties, the major properties of integers are:
- Closure Property
- Associative Property
- Commutative Property
- Distributive Property
- Identity Property
- Additive Inverse
- Multiplicative Inverse
Closure Property
Closure property of integers states that if two integers are added or multiplied together their result is always an integer. For integers p and q
- p + q = integer
- p × q = integer
Example:
(-8) + 11 = 3 (An integer)
(-8) × 11 = -88 (An integer)
Commutative Property
Commutative property of integers states that for two integers p and q
- p + q = q + p
- p × q = q × p
Example:
(-8) + 11 = 11 + (-8) = 3
(-8) × 11 = 11 × (-8) = -88
But the commutative property is not applicable to the subtraction and division of integers.
Associative Property
Associative property of integers states that for integers p, q, and r
- p + (q + r) = (p + q) + r
- p × (q × r) = (p × q) × r
Example:
5 + (4 + 3) = (5 + 4) + 3 = 12
5 × (4 × 3) = (5 × 4) × 3 = 60
Distributive Property
Distributive property of integers states that for integers p, q, and r
- p × (q + r) = p × q + p × r
For Example, Prove: 5 × (9 + 6) = 5 × 9 + 5 × 6
Solution:
LHS = 5 × (9 + 6)
= 5 × 15
= 75
RHS = 5 × 9 + 5 × 6
= 45 + 30
= 75
Thus, LHS = RHS Proved
Identity Property
Integers hold Identity elements both for addition and multiplication. Operation with the Identity element yields the same integers, such that
Here, 0 is Additive Identity, and 1 is Multiplicative Identity.
Additive Inverse
Every integer has its additive inverse. An additive inverse is a number that in addition to the integer gives the additive identity. For integers, Additive Identity is 0. For example, take an integer p then its additive inverse is (-p) such that
Multiplicative Inverse
Every integer has its multiplicative inverse. A multiplicative inverse is a number that when multiplied to the integer gives the multiplicative identity. For integers, Multiplicative Identity is 1. For example, take an integer p then its multiplicative inverse is (1/p) such that
Applications of Integers
Integers extend beyond numbers, finding applications of integers in real life. Positive and negative values represent opposing situations. For instance, they indicate temperatures above and below zero. They facilitate comparisons, measurements, and quantification. Integers feature prominently in sports scores, ratings for movies and songs, and financial transactions like bank credits and debits.
Articles Related to Integers:
Integers Examples
Some examples on Integers are,
Example 1: Can we say that 7 is both a whole number and a natural number?
Solution:
Yes, 7 is both whole number and natural number.
Example 2: Is 5 a whole number and a natural number?
Solution:
Yes, 5 is both a natural number and whole number.
Example 3: Is 0.7 a whole number?
Solution:
No, it is a decimal.
Example 4: Is -17 a whole number or a natural number?
Solution:
No, -17 is neither natural number nor whole number.
Example 5: Categorize the given numbers among Integers, whole numbers, and natural numbers,
Solution:
Numbers | Integers | Whole Numbers | Natural Numbers |
---|
-3 | Yes | No | No |
77 | Yes | Yes | Yes |
34.99 | No | No | No |
1 | Yes | Yes | Yes |
100 | Yes | Yes | Yes |
Integers Class 6 Worksheet
Integers are a fundamental concept in mathematics, especially introduced at the class 6 level, aiming to broaden the understanding of numbers beyond natural numbers and whole numbers. Worksheet on Integers for students to solve is added below:
Solve:
- 23 + (-12)
- 15 – 12
- -14 + 14
- (13) × (-17)
- (4) × (12)
- 0 × (-87)
- (114) ÷ (-7)
- (-7) ÷ (-3)
Answer Key:
- 23 + (-12) = 11
- 15 - 12 = 3
- -14 + 14 = 0
- 13 × (-17) = -221
- 4 × 12 = 48
- 0 × (-87) = 0
- 114 ÷ (-7) = -16.29
- -7 ÷ (-3) = 2.33
Read More: Practice Questions on Integers
Similar Reads
Maths Mathematics, often referred to as "math" for short. It is the study of numbers, quantities, shapes, structures, patterns, and relationships. It is a fundamental subject that explores the logical reasoning and systematic approach to solving problems. Mathematics is used extensively in various fields
5 min read
Basic Arithmetic
What are Numbers?Numbers are symbols we use to count, measure, and describe things. They are everywhere in our daily lives and help us understand and organize the world.Numbers are like tools that help us:Count how many things there are (e.g., 1 apple, 3 pencils).Measure things (e.g., 5 meters, 10 kilograms).Show or
15+ min read
Arithmetic OperationsArithmetic Operations are the basic mathematical operationsâAddition, Subtraction, Multiplication, and Divisionâused for calculations. These operations form the foundation of mathematics and are essential in daily life, such as sharing items, calculating bills, solving time and work problems, and in
9 min read
Fractions - Definition, Types and ExamplesFractions are numerical expressions used to represent parts of a whole or ratios between quantities. They consist of a numerator (the top number), indicating how many parts are considered, and a denominator (the bottom number), showing the total number of equal parts the whole is divided into. For E
7 min read
What are Decimals?Decimals are numbers that use a decimal point to separate the whole number part from the fractional part. This system helps represent values between whole numbers, making it easier to express and measure smaller quantities. Each digit after the decimal point represents a specific place value, like t
10 min read
ExponentsExponents are a way to show that a number (base) is multiplied by itself many times. It's written as a small number (called the exponent) to the top right of the base number.Think of exponents as a shortcut for repeated multiplication:23 means 2 x 2 x 2 = 8 52 means 5 x 5 = 25So instead of writing t
9 min read
PercentageIn mathematics, a percentage is a figure or ratio that signifies a fraction out of 100, i.e., A fraction whose denominator is 100 is called a Percent. In all the fractions where the denominator is 100, we can remove the denominator and put the % sign.For example, the fraction 23/100 can be written a
5 min read
Algebra
Variable in MathsA variable is like a placeholder or a box that can hold different values. In math, it's often represented by a letter, like x or y. The value of a variable can change depending on the situation. For example, if you have the equation y = 2x + 3, the value of y depends on the value of x. So, if you ch
5 min read
Polynomials| Degree | Types | Properties and ExamplesPolynomials are mathematical expressions made up of variables (often represented by letters like x, y, etc.), constants (like numbers), and exponents (which are non-negative integers). These expressions are combined using addition, subtraction, and multiplication operations.A polynomial can have one
9 min read
CoefficientA coefficient is a number that multiplies a variable in a mathematical expression. It tells you how much of that variable you have. For example, in the term 5x, the coefficient is 5 â it means 5 times the variable x.Coefficients can be positive, negative, or zero. Algebraic EquationA coefficient is
8 min read
Algebraic IdentitiesAlgebraic Identities are fundamental equations in algebra where the left-hand side of the equation is always equal to the right-hand side, regardless of the values of the variables involved. These identities play a crucial role in simplifying algebraic computations and are essential for solving vari
14 min read
Properties of Algebraic OperationsAlgebraic operations are mathematical processes that involve the manipulation of numbers, variables, and symbols to produce new results or expressions. The basic algebraic operations are:Addition ( + ): The process of combining two or more numbers to get a sum. For example, 3 + 5 = 8.Subtraction (â)
3 min read
Geometry
Lines and AnglesLines and Angles are the basic terms used in geometry. They provide a base for understanding all the concepts of geometry. We define a line as a 1-D figure that can be extended to infinity in opposite directions, whereas an angle is defined as the opening created by joining two or more lines. An ang
9 min read
Geometric Shapes in MathsGeometric shapes are mathematical figures that represent the forms of objects in the real world. These shapes have defined boundaries, angles, and surfaces, and are fundamental to understanding geometry. Geometric shapes can be categorized into two main types based on their dimensions:2D Shapes (Two
2 min read
Area and Perimeter of Shapes | Formula and ExamplesArea and Perimeter are the two fundamental properties related to 2-dimensional shapes. Defining the size of the shape and the length of its boundary. By learning about the areas of 2D shapes, we can easily determine the surface areas of 3D bodies and the perimeter helps us to calculate the length of
10 min read
Surface Areas and VolumesSurface Area and Volume are two fundamental properties of a three-dimensional (3D) shape that help us understand and measure the space they occupy and their outer surfaces.Knowing how to determine surface area and volumes can be incredibly practical and handy in cases where you want to calculate the
10 min read
Points, Lines and PlanesPoints, Lines, and Planes are basic terms used in Geometry that have a specific meaning and are used to define the basis of geometry. We define a point as a location in 3-D or 2-D space that is represented using coordinates. We define a line as a geometrical figure that is extended in both direction
14 min read
Coordinate Axes and Coordinate Planes in 3D spaceIn a plane, we know that we need two mutually perpendicular lines to locate the position of a point. These lines are called coordinate axes of the plane and the plane is usually called the Cartesian plane. But in real life, we do not have such a plane. In real life, we need some extra information su
6 min read
Trigonometry & Vector Algebra
Trigonometric RatiosThere are three sides of a triangle Hypotenuse, Adjacent, and Opposite. The ratios between these sides based on the angle between them is called Trigonometric Ratio. The six trigonometric ratios are: sine (sin), cosine (cos), tangent (tan), cotangent (cot), cosecant (cosec), and secant (sec).As give
4 min read
Trigonometric Equations | Definition, Examples & How to SolveTrigonometric equations are mathematical expressions that involve trigonometric functions (such as sine, cosine, tangent, etc.) and are set equal to a value. The goal is to find the values of the variable (usually an angle) that satisfy the equation.For example, a simple trigonometric equation might
9 min read
Trigonometric IdentitiesTrigonometric identities play an important role in simplifying expressions and solving equations involving trigonometric functions. These identities, which include relationships between angles and sides of triangles, are widely used in fields like geometry, engineering, and physics. Some important t
10 min read
Trigonometric FunctionsTrigonometric Functions, often simply called trig functions, are mathematical functions that relate the angles of a right triangle to the ratios of the lengths of its sides.Trigonometric functions are the basic functions used in trigonometry and they are used for solving various types of problems in
6 min read
Inverse Trigonometric Functions | Definition, Formula, Types and Examples Inverse trigonometric functions are the inverse functions of basic trigonometric functions. In mathematics, inverse trigonometric functions are also known as arcus functions or anti-trigonometric functions. The inverse trigonometric functions are the inverse functions of basic trigonometric function
11 min read
Inverse Trigonometric IdentitiesInverse trigonometric functions are also known as arcus functions or anti-trigonometric functions. These functions are the inverse functions of basic trigonometric functions, i.e., sine, cosine, tangent, cosecant, secant, and cotangent. It is used to find the angles with any trigonometric ratio. Inv
9 min read
Calculus
Introduction to Differential CalculusDifferential calculus is a branch of calculus that deals with the study of rates of change of functions and the behaviour of these functions in response to infinitesimal changes in their independent variables.Some of the prerequisites for Differential Calculus include:Independent and Dependent Varia
6 min read
Limits in CalculusIn mathematics, a limit is a fundamental concept that describes the behaviour of a function or sequence as its input approaches a particular value. Limits are used in calculus to define derivatives, continuity, and integrals, and they are defined as the approaching value of the function with the inp
12 min read
Continuity of FunctionsContinuity of functions is an important unit of Calculus as it forms the base and it helps us further to prove whether a function is differentiable or not. A continuous function is a function which when drawn on a paper does not have a break. The continuity can also be proved using the concept of li
13 min read
DifferentiationDifferentiation in mathematics refers to the process of finding the derivative of a function, which involves determining the rate of change of a function with respect to its variables.In simple terms, it is a way of finding how things change. Imagine you're driving a car and looking at how your spee
2 min read
Differentiability of a Function | Class 12 MathsContinuity or continuous which means, "a function is continuous at its domain if its graph is a curve without breaks or jumps". A function is continuous at a point in its domain if its graph does not have breaks or jumps in the immediate neighborhood of the point. Continuity at a Point: A function f
11 min read
IntegrationIntegration, in simple terms, is a way to add up small pieces to find the total of something, especially when those pieces are changing or not uniform.Imagine you have a car driving along a road, and its speed changes over time. At some moments, it's going faster; at other moments, it's slower. If y
3 min read
Probability and Statistics
Basic Concepts of ProbabilityProbability is defined as the likelihood of the occurrence of any event. It is expressed as a number between 0 and 1, where 0 is the probability of an impossible event and 1 is the probability of a sure event.Concepts of Probability are used in various real life scenarios : Stock Market : Investors
7 min read
Bayes' TheoremBayes' Theorem is a mathematical formula used to determine the conditional probability of an event based on prior knowledge and new evidence. It adjusts probabilities when new information comes in and helps make better decisions in uncertain situations.Bayes' Theorem helps us update probabilities ba
13 min read
Probability Distribution - Function, Formula, TableA probability distribution is a mathematical function or rule that describes how the probabilities of different outcomes are assigned to the possible values of a random variable. It provides a way of modeling the likelihood of each outcome in a random experiment.While a Frequency Distribution shows
13 min read
Descriptive StatisticStatistics is the foundation of data science. Descriptive statistics are simple tools that help us understand and summarize data. They show the basic features of a dataset, like the average, highest and lowest values and how spread out the numbers are. It's the first step in making sense of informat
5 min read
What is Inferential Statistics?Inferential statistics is an important tool that allows us to make predictions and conclusions about a population based on sample data. Unlike descriptive statistics, which only summarize data, inferential statistics let us test hypotheses, make estimates, and measure the uncertainty about our predi
7 min read
Measures of Central Tendency in StatisticsCentral tendencies in statistics are numerical values that represent the middle or typical value of a dataset. Also known as averages, they provide a summary of the entire data, making it easier to understand the overall pattern or behavior. These values are useful because they capture the essence o
11 min read
Set TheorySet theory is a branch of mathematics that deals with collections of objects, called sets. A set is simply a collection of distinct elements, such as numbers, letters, or even everyday objects, that share a common property or rule.Example of SetsSome examples of sets include:A set of fruits: {apple,
3 min read
Practice