Arduino for beginners- Introduction to Arduino (presentation) - codewithgauri

Dec 2, 2020Download as pptx, pdf

4 likes15,292 views

The document provides an overview of the Arduino platform for beginners. It defines Arduino as an open-source platform used for building electronics projects. All Arduino boards contain a microcontroller, which is a small computer. It then describes some popular Arduino boards like the Uno, Nano, Due, and Mega and their key specs and applications. The document proceeds to explain the main components of an Arduino Uno board such as the power supply, USB port, microcontroller, analog and digital pins. It provides details on the functions of these components and how they enable the Arduino board to operate.

ARDUINO FOR BEGINNERS
Instructor- Gaurav Pandey
www.blog.codewithgauri.tech
WELCOME TO :

What is Arduino ?
● Arduino is an open-source platform used for building electronics
projects.
● All Arduino boards have a microcontroller.
● A microcontroller is basically a really
small computer.

Most read

This is a printer USB port used to load a
program from the Arduino IDE onto the Arduino
board. The board can also be powered through
this port.
USB Port

Power port:
The Arduino board can be powered
through an AC-to-DC adapter or a battery.
The power source can be connected by
plugging in a 2.1mm center-positive plug
into the power jack of the board.
2.1mm center-positive plug
The Arduino UNO board operates at a voltage of
5 volts, but it can withstand a maximum voltage
of 20 volts. If the board is supplied with a higher
voltage, there is a voltage regulator (it sits
between the power port and USB connector) that
protects the board from burning out.

Microcontroller
It is brains of your Arduino. The microcontroller used on the UNO board is
Atmega328P by Atmel Atmega328P has the following components in it:
● Flash memory of 32KB. The program loaded from Arduino IDE is stored
here.
● RAM of 2KB
● CPU: It controls everything that goes on within the device. It fetches the
program instructions from flash memory and runs them with the help of
RAM.
● Electrically Erasable Programmable Read Only Memory (EEPROM) of
1KB. This is a type of nonvolatile memory, and it keeps the data even
after device restart and reset.

Analog input pins:
The Arduino UNO board has 6 analog input pins, labeled “Analog 0
to 5.” These pins can read the signal from an analog sensor like a
temperature sensor and convert it into a digital value so that the
system understands. These pins just measure voltage and not the
current because they have very high internal resistance. Hence,
only a small amount of current flows through these pins.
Although these pins are labeled analog and are analog input by
default, these pins can also be used for digital input or output.

Digital Pins You can find these pins labeled “Digital 0 to 13.” These pins can be
used as either input or output pins.
When used as output: pins act as a power supply source for the
components connected to them. (supply 4 mA of current at 5 V)
When used as input : they read the signals from the component
connected to them.
Some of the digital pins are labeled with
tilde (~) symbol next to the pin numbers (pin
numbers 3, 5, 6, 9, 10, and 11). These pins
act as normal digital pins but can also be
used for Pulse-Width Modulation (PWM),
which simulates analog output like fading
an LED in and out.

Arduino for beginners- Introduction to Arduino (presentation) - codewithgauri

DC Power Jack
Voltage Regulator
USB Port
Reset Button
Analog Reference Voltage
Ground
Digital
Pins
Serial Communication
Analog pins
ATmega328
Power Source -
Crystal Oscillator
in -Circuit Serial
Programming Header
5V ON Indication LED
USB Interface chip

This document provides an introduction to line follower competitions using Arduino microcontrollers. It discusses what a microcontroller is and types of Arduino boards. The coding structure is explained, covering data types, functions, control statements and loop statements. A workshop section describes how to control a DC motor using Arduino to rotate clockwise for 2 seconds and counter-clockwise for 5 seconds in an infinite loop.

PPT ON Arduino Ravi Phadtare

This presentation summarizes a summer training on Arduino. It defines Arduino as an open-source hardware and software platform for building electronics projects. It describes the main types of Arduino boards including the Arduino Uno, Mega 2560, Duemilanove, and Fio. It also outlines some key features of the Arduino Uno board. Furthermore, it provides examples of interfacing Arduino with a DC motor and RC car motor. The presentation concludes by listing some common applications of Arduino and its advantages.

Intro to Arduinoavikdhupar

The document provides an overview of the Arduino platform, including what it is, what it is used for, and how to get started using it. Key points: - Arduino is an open-source hardware and software platform for building interactive electronic projects through a simple programming language. - It is used for physical computing projects, interactive installations, and rapid prototyping. Projects can include sensors and actuators. - Getting started requires an Arduino board, USB cable, power supply, and downloading the IDE (integrated development environment) to write and upload code. Basic electrical safety knowledge is also important.

Arduino Workshop Day 1 - Basic ArduinoVishnu

Introduction to Arduino Hardware and ProgrammingEmmanuel Obot

Introduction to Arduino Hardware and Programming: Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects. Teachers and students use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics. Designers and architects build interactive prototypes, musicians and artists use it for installations and to experiment with new musical instruments. Makers, of course, use it to build many of the projects exhibited at the Maker Faire. Arduino is a key tool to learn new things. Anyone - children, hobbyists, artists, programmers can use it to build an interactive device.

Basics of arduino unoRahat Sood

This document provides an overview of the Arduino Uno microcontroller board. It defines a microcontroller as a single-chip computer containing a CPU, memory, and input/output interfaces. The Arduino is an open-source electronics platform with easy-to-use hardware and software that allows anyone to develop interactive electronic projects. Key specifications of the Arduino Uno board are provided, including its microcontroller chip, memory, analog and digital pins. The process of analog to digital conversion is explained. Basic Arduino programming concepts like data types, statements, operators, and control structures are covered. The bare minimum code structure of setup() and loop() functions is described.

Arduino Workshop Day 2 - Advance Arduino & DIYVishnu

Lesson sample introduction to arduinoBetsy Eng

This document introduces Arduino by defining what it is, the parts of an Arduino board, and how to program it. An Arduino is a microcontroller board that can be used to develop interactive objects by taking various inputs (e.g. sensors) and controlling physical outputs (e.g. lights, motors). It explains the basic components of an Arduino board and how Arduino code is uploaded and run. A simple example is provided to blink an LED using Arduino code and by changing the delay times, the blinking speed can be adjusted. Keywords like Arduino board, sketch, and LED are also defined.

Arduinovipin7vj

The document discusses the Arduino, an open-source electronics prototyping platform. It provides a brief history of how Arduino was created in 2005 to provide an affordable platform for interactive design projects. It describes the key features of the Arduino Uno board and the Arduino programming environment. Finally, it outlines some common applications of Arduino in fields like home automation, robotics, and sensor prototyping.

Introduction to arduino ppt maineddy royappa

Arduino is an open-source hardware and software platform for building interactive electronic projects. It consists of a programmable microcontroller board and IDE software to write code. The board contains ports that can be configured as digital or analog inputs/outputs to interact with sensors, LEDs, motors and other components. Common Arduino boards include the Uno, Nano, Mega and Leonardo, which differ in processor, memory and I/O pins. The ATmega328P microcontroller on the Uno uses a Harvard architecture with separate memory and buses for instructions and data, allowing simultaneous access.

Introduction to Arduino ProgrammingJames Lewis

This document provides an overview of Arduino programming concepts including: - The Arduino programming language is based on C/C++ and includes libraries for interfacing with hardware. - Examples are provided for basic blink programs, using variables, functions, control structures like if statements and loops, reading analog/digital pins, and using the serial monitor. - Key concepts covered include variable scope, data types, naming conventions, pin modes, analog/digital reading and writing, functions, arrays, and different loop structures.

Introduction to ArduinoRichard Rixham

Richard Rixham introduces Arduino, an open source hardware and software platform that allows users to build physical computing devices ranging from flashing lights to robots. Arduino uses an inexpensive microcontroller board and IDE to make programming in C/C++ accessible. It has digital and analog pins that can interact with sensors and actuators. Common Arduino models include the Uno, Mini, and Mega. Shield add-on boards provide extra functions like wireless connectivity. Example projects and resources for learning more are provided.

Arduino unocreatjet3d labs

The Arduino Uno is a microcontroller board based on the ATmega328P chip. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. The board has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter to get started.

Arduino- Serial communicationJawaher Abdulwahab Fadhil

Introduction to ArduinoYong Heui Cho

Arduino is an open-source hardware and software prototyping platform used for building electronics projects. It consists of a microcontroller board and an IDE used to write code. The board can be connected to sensors, actuators and other hardware components. There are many Arduino boards and derivatives that vary in size, capability, and function. The Arduino IDE uses a simplified version of C/C++ and provides an easy way to compile and upload code to the board.

Arduino Workshopatuline

This document outlines an Arduino workshop. It includes an overview of the agenda which involves introductions, checking equipment, experimentation time, and creating personal projects. It then details introducing participants and encouraging collaboration. A list of included parts in the kits is provided. Instructions are given for installing the Arduino software and development environment. Examples are shown for breadboard layouts and code for simple projects like blinking an LED and reading input from a button. Additional experiments suggested include using sensors, LCD displays, motors, and programming an RGB LED with a joystick. Sources for parts, tutorials, and inspiration are listed to encourage continued learning.

Introduction to MicrocontrollerPantech ProLabs India Pvt Ltd

This document provides an introduction to microcontrollers. It defines microcontrollers as small computers capable of performing specific tasks, like in appliances. Microcontrollers contain a CPU core, memory, input/output ports, timers and other peripherals on a single chip. They are classified as either microcontroller units (MCU) or microprocessor units (MPU) depending on whether external components are needed. Common microcontroller components and their functions are described, along with factors to consider when choosing a microcontroller for an application.

ArduinoJerin John

This document provides an overview of Arduino, an open-source hardware platform used for building interactive objects and prototypes. It describes Arduino as a single-board microcontroller intended to make electronics projects more accessible. Key topics covered include the Arduino programming environment, common Arduino boards and their features, examples of simple Arduino projects like blinking an LED and building a line-following robot, and comparisons to other prototyping platforms. The document encourages readers to get started with Arduino for its low cost, easy programming environment, and large community support.

Arduino courseAhmed Shelbaya

This document provides an overview of an Arduino course covering embedded systems and programming. The summary includes: - The course covers introduction to embedded systems including components, characteristics, and basic structure. It also covers introduction to computer programming concepts for Arduino including variables, operators, control statements, functions, and C language basics. - The document outlines the Arduino environment including boards, software IDE, sensors, actuators and provides examples of electronic components like LEDs, buttons, and code for digital input/output and serial communication. - Finally, the course covers creating circuit diagrams and interfacing with common modules like LCD displays, ultrasonic sensors, relays, Bluetooth and DC motors.

Arduino MicrocontrollerShyam Mohan

Microcontroller presentationxavierpaulino

A microcontroller is an integrated circuit that can be programmed to control electronic devices. It contains a processor, memory, and input/output ports on a single chip. Microcontrollers come in various sizes based on their word length and internal bus width, from 4-bit to 32-bit. They also differ based on their memory architecture and instruction set. A microcontroller allows easy programming to control devices in embedded systems and provides advantages like low cost, small size, and flexibility.

8051 Microcontroller pptRahul Kumar

The document discusses the 8051 microcontroller, including its architecture, pin configuration, memory organization, timers, interrupts, and interfacing capabilities. It describes the 8051's features like on-chip RAM, ROM, timers and low power consumption which make it suitable for control applications. The document outlines the differences between microprocessors and microcontrollers, and covers various interfacing examples like switches, LEDs, 7-segment displays, LCDs, ADCs and relay interfacing. It concludes with common applications of the 8051 such as in automobiles, industrial processing, robotics and consumer electronics.

Embedded system design using arduinoSantosh Verma

Arduino and c programmingPunit Goswami

Introduction to ArduinoOmer Kilic

This document introduces Arduino, an open-source electronics prototyping platform. It discusses that Arduino is intended for artists, designers, hobbyists to create interactive objects. It then describes the Arduino hardware, including the microcontroller, I/O pins, and official and third party boards. It also covers the Arduino programming environment and language, and provides examples of common tasks like reading buttons and displaying to serial. Finally, it discusses common sensors, motors, and modules used with Arduino and points to the active Arduino community for support.

Arduino presentation by_warishusainstudent

The document discusses Arduino, an open-source hardware platform used for building electronics projects. It notes that Arduino is a microcontroller board that can be programmed to read input and control output from various sensors and actuators. The document provides details on Arduino components, programming, common shields and expansions, applications in different domains, and its popularity as an accessible platform for physical computing.

Embedded systemVinod Srivastava

This document provides an overview of embedded systems and their processors. It defines an embedded system as having computer hardware and software embedded as important components. Processors are the heart of embedded systems and can be microprocessors or microcontrollers. Components include hardware, memories, ports and application software. Languages for programming embedded systems include C and C++. Embedded systems are classified based on scale, connectivity and mobility. They have constraints like limited memory and need for low power. Common applications include household appliances, audio players, vehicle controllers and medical equipment.

Arduino presentationMichael Senkow

Arduino is an open-source hardware platform for building interactive electronic projects. It consists of a simple open hardware design with an Atmel processor and input/output support. The hardware is less expensive than other prototyping devices. It is accompanied by a software side written in Java and based on Processing. Arduino began in Italy to control student-built interaction design projects and is descended from the open-source Wiring platform. It has a large community and potential for growth supporting its future success.

Arduino Familymahalakshmimalini

POWERPOINT PRESENTATION ABOUT THE PARTS OF ARDUINO UNOMarcheryAlingal

The document introduces the Arduino, an open-source electronic prototyping platform. It includes both hardware (Arduino boards) and software (Arduino IDE). There are different types of Arduino boards like the Arduino Lilypad, Mini, Mega, and Nano. The Arduino Uno board is then described in detail, outlining its major components like the microcontroller, analog and digital pins, power port, USB connector, and reset switch.

More Related Content

What's hot (20)

Arduinovipin7vj

Introduction to arduino ppt maineddy royappa

Introduction to Arduino ProgrammingJames Lewis

Introduction to ArduinoRichard Rixham

Arduino unocreatjet3d labs

Arduino- Serial communicationJawaher Abdulwahab Fadhil

Introduction to ArduinoYong Heui Cho

Arduino Workshopatuline

Introduction to MicrocontrollerPantech ProLabs India Pvt Ltd

ArduinoJerin John

Arduino courseAhmed Shelbaya

Arduino MicrocontrollerShyam Mohan

Microcontroller presentationxavierpaulino

8051 Microcontroller pptRahul Kumar

Embedded system design using arduinoSantosh Verma

Arduino and c programmingPunit Goswami

Introduction to ArduinoOmer Kilic

Arduino presentation by_warishusainstudent

Embedded systemVinod Srivastava

Arduino presentationMichael Senkow

Arduinovipin7vj

Introduction to arduino ppt maineddy royappa

Introduction to Arduino ProgrammingJames Lewis

Introduction to ArduinoRichard Rixham

Arduino unocreatjet3d labs

Arduino- Serial communicationJawaher Abdulwahab Fadhil

Introduction to ArduinoYong Heui Cho

Arduino Workshopatuline

Introduction to MicrocontrollerPantech ProLabs India Pvt Ltd

ArduinoJerin John

Arduino courseAhmed Shelbaya

Arduino MicrocontrollerShyam Mohan

Microcontroller presentationxavierpaulino

8051 Microcontroller pptRahul Kumar

Embedded system design using arduinoSantosh Verma

Arduino and c programmingPunit Goswami

Introduction to ArduinoOmer Kilic

Arduino presentation by_warishusainstudent

Embedded systemVinod Srivastava

Arduino presentationMichael Senkow

Similar to Arduino for beginners- Introduction to Arduino (presentation) - codewithgauri (20)

Arduino Familymahalakshmimalini

POWERPOINT PRESENTATION ABOUT THE PARTS OF ARDUINO UNOMarcheryAlingal

VERY NICE FOR CSE 3RD YEAR AND IOT STUDENTSneelamsanjeevkumar

IOT ARDUINO UNO.pptxSanaMateen7

The document discusses the Arduino UNO board. It describes the components of the board including the ATmega328 microcontroller and digital and analog pins. It explains how to program the board using the Arduino IDE and connect it to a computer via USB. The steps to get started with the board are outlined, including installing drivers and uploading code to control digital pins using functions like pinMode(), digitalWrite(), and delay().

raushan●๋•ŕáừکháń Kừmáŕ

The document discusses the components and functions of an Arduino Uno microcontroller board. It describes the Arduino Uno's power supply options, voltage regulator, crystal oscillator for timekeeping, reset button, analog and digital input/output pins, microcontroller chip, and indicators for power, transmission and reception of serial data. The board contains all the necessary components to function as a programmable microcontroller within a small, easy-to-use package.

Introduction to arduinoJawaher Abdulwahab Fadhil

Arduino arduino boardunoFilipe Campos

Introduction to Arduino 16822775 (2).pptansariparveen06

The document provides an introduction to Arduino boards. It describes that Arduinos contain a microcontroller and can be programmed to interact with electronic components. The specific board being discussed, the Arduino Uno R3, contains an ATmega328 chip, has ports for digital and analog input/output, and can be expanded with shields. The document also outlines how to install the Arduino IDE software and provides an example code to fade an LED on and off.

ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pdfRuby Hermano

This document provides an overview of the Arduino hardware and software platform. It discusses that Arduino is an open-source electronics platform that can read inputs and turn them into outputs. Common Arduino boards like the UNO, Nano, Leonardo and Micro are identified along with their key components and specifications. The document also explains the benefits of using Arduino including its low cost, cross-platform software, simple programming and extensible open-source hardware and software.

ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pptxmenchc1207

The document provides an overview of the Arduino hardware and software platform. It discusses that Arduino is an open-source electronics platform that can read inputs and turn them into outputs. Some common Arduino boards are then described, including the Arduino UNO, Nano, Leonardo, and Micro. The Arduino UNO is highlighted as one of the most popular boards due to its extensive documentation and tutorials available. The key components of the Arduino UNO board are then outlined.

Introduction to arduino!Makers of India

The document introduces Arduino pins and their functions. It describes the different types of signals and then discusses the ATmega328p microcontroller used in Arduino boards. It details the various pin types on Arduino boards including power pins, analog input pins, digital I/O pins, Tx/Rx pins for serial communication, and special function pins. The pin functions described include power regulation, analog to digital conversion, digital input/output, serial data transmission/reception, and resetting the microcontroller.

Neno Project.docxAditiBhushan3

The document discusses the Arduino Nano development board. It provides an overview of the board's specifications including its microcontroller, operating voltage, analog and digital pins, memory, and communication interfaces. It also compares the Nano to the Arduino Uno and Arduino Mega boards, highlighting their differences in size, programming, and technical specifications. The document then provides instructions on how to power and program the Nano board using the Arduino IDE and examples.

Arduino unoSAKIBNESARRATUL20135

The document describes the major components of an Arduino Uno board. It explains that the board contains a microcontroller, analog and digital pins that can be used for inputs or outputs, a USB connector for programming and power, a power port for an external power source, and LEDs and chips to facilitate communication. The microcontroller is an Atmega328P that contains memory and a CPU to run loaded programs. The board converts sensor signals to digital values and allows control of connected components through its pins.

ArduinoShusomm

The document provides an overview of Arduino, including what it is, its history, types of Arduino boards, and the Arduino UNO board. Arduino is an open-source hardware and software company that designs and manufactures microcontroller kits for building digital devices. It was founded in 2005 to provide a low-cost option for students and designers to control interactive objects. Popular Arduino boards include the UNO, MEGA, LilyPad, and Yun. The Arduino UNO has an ATmega328P microcontroller, 14 digital input/output pins, 6 analog pins, a 16MHz clock speed, and runs on a 5V power supply.

Arduino microcontroller ins and outs with pin diagramArifatunNesa

Lecture 7vishal choudhary

This document provides information about the Arduino hardware platform. It defines Arduino as an open-source hardware platform used for prototyping that consists of a programmable circuit board and IDE software. It then describes the key features of Arduino boards, including reading analog/digital sensor inputs and controlling outputs. The document proceeds to explain the components of a basic Arduino board and how to install and use the Arduino IDE software to write and upload programs.

The arduino uno is a microcontroller board based on thePramod Kumar

The document provides information about the Arduino Uno microcontroller board. It discusses the following key details: - The Uno uses the ATmega328 microcontroller and has 14 digital input/output pins, 6 analog inputs, a USB connection, power jack, and reset button. - It can be powered via USB or an external power source between 6-20V connected to the power jack or Vin pin. - The board has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM for storage. Communication is supported through serial via USB or pins 0 and 1, I2C, and SPI. - The Uno can be programmed through the USB

arduino uno20PA013BHOOMIKAP

This document provides an overview of the Arduino Uno microcontroller board. It describes that the Arduino Uno contains an ATmega328 microprocessor and can be used to control electronics projects through input and output pins. The Arduino IDE software is used to write programs that can be compiled and uploaded to the board via a USB connection. The document explains the different pin types on the Arduino Uno and provides examples of how sensors and actuators can be connected to collect analog and digital data and control outputs.

Arduino intro.pptxAlexRiv4

This document provides an introduction to Arduino, including: - What Arduino is and its uses for artists, students, and hobbyists. - That Arduino is a microcontroller board based on the ATmega328 chip, which has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. - Different types of Arduino boards like Uno, Mega, LilyPad, and DIY boards. - How to code for Arduino using the Arduino IDE software, by selecting the correct board and port and uploading programs. - Key concepts like digital and analog I/O, if-statements, and serial communication.

Internet of Things Unit 3 notes-Design and Development and Arduino.pptxDinola2

Arduino Familymahalakshmimalini

POWERPOINT PRESENTATION ABOUT THE PARTS OF ARDUINO UNOMarcheryAlingal

VERY NICE FOR CSE 3RD YEAR AND IOT STUDENTSneelamsanjeevkumar

IOT ARDUINO UNO.pptxSanaMateen7

raushan●๋•ŕáừکháń Kừmáŕ

Introduction to arduinoJawaher Abdulwahab Fadhil

Arduino arduino boardunoFilipe Campos

Introduction to Arduino 16822775 (2).pptansariparveen06

ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pdfRuby Hermano

ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pptxmenchc1207

Introduction to arduino!Makers of India

Neno Project.docxAditiBhushan3

Arduino unoSAKIBNESARRATUL20135

ArduinoShusomm

Arduino microcontroller ins and outs with pin diagramArifatunNesa

Lecture 7vishal choudhary

The arduino uno is a microcontroller board based on thePramod Kumar

arduino uno20PA013BHOOMIKAP

Arduino intro.pptxAlexRiv4

Internet of Things Unit 3 notes-Design and Development and Arduino.pptxDinola2

Recently uploaded (20)

grade 9 science q1 quiz.pptx science quiznorfapangolima

362 Alec Data Center Solutions-Slysium Data Center-AUH-ABB Furse.pdfdjiceramil

22PCOAM16 _ML_Unit 3 Notes & Question bankGuru Nanak Technical Institutions

chemistry investigatory project for class 12Susis10

WIRELESS COMMUNICATION SECURITY AND IT’S PROTECTION METHODSsamueljackson3773

In this paper, the author discusses the concerns of using various wireless communications and how to use them safely. The author also discusses the future of the wireless industry, wireless communication security, protection methods, and techniques that could help organizations establish a secure wireless connection with their employees. The author also discusses other essential factors to learn and note when manufacturing, selling, or using wireless networks and wireless communication systems.

362 Alec Data Center Solutions-Slysium Data Center-AUH-Adaptaflex.pdfdjiceramil

Impurities of Water and their Significance.pptxdhanashree78

社内勉強会資料_Chain of Thought .NABLAS株式会社

本資料「To CoT or not to CoT?」では、大規模言語モデルにおけるChain of Thought（CoT）プロンプトの効果について詳しく解説しています。 CoTはあらゆるタスクに効く万能な手法ではなく、特に数学的・論理的・アルゴリズム的な推論を伴う課題で高い効果を発揮することが実験から示されています。一方で、常識や一般知識を問う問題に対しては効果が限定的であることも明らかになりました。複雑な問題を段階的に分解・実行する「計画と実行」のプロセスにおいて、CoTの強みが活かされる点も注目ポイントです。 This presentation explores when Chain of Thought (CoT) prompting is truly effective in large language models. The findings show that CoT significantly improves performance on tasks involving mathematical or logical reasoning, while its impact is limited on general knowledge or commonsense tasks.

The first edition of the AIAG-VDA FMEA.pptxMayank Mathur

Rigor, ethics, wellbeing and resilience in the ICT doctoral journeyYannis

The doctoral thesis trajectory has been often characterized as a “long and windy road” or a journey to “Ithaka”, suggesting the promises and challenges of this journey of initiation to research. The doctoral candidates need to complete such journey (i) preserving and even enhancing their wellbeing, (ii) overcoming the many challenges through resilience, while keeping (iii) high standards of ethics and (iv) scientific rigor. This talk will provide a personal account of lessons learnt and recommendations from a senior researcher over his 30+ years of doctoral supervision and care for doctoral students. Specific attention will be paid on the special features of the (i) interdisciplinary doctoral research that involves Information and Communications Technologies (ICT) and other scientific traditions, and (ii) the challenges faced in the complex technological and research landscape dominated by Artificial Intelligence.

How Binning Affects LED Performance & Consistency.pdfMina Anis

🔍 What’s Inside: 📦 What Is LED Binning? • The process of sorting LEDs by color temperature, brightness, voltage, and CRI • Ensures visual and performance consistency across large installations 🎨 Why It Matters: • Inconsistent binning leads to uneven color and brightness • Impacts brand perception, customer satisfaction, and warranty claims 📊 Key Concepts Explained: • SDCM (Standard Deviation of Color Matching) • Recommended bin tolerances by application (e.g., 1–3 SDCM for retail/museums) • How to read bin codes from LED datasheets • The difference between ANSI/NEMA standards and proprietary bin maps 🧠 Advanced Practices: • AI-assisted bin prediction • Color blending and dynamic calibration • Customized binning for high-end or global projects

Montreal Dreamin' 25 - Introduction to the MuleSoft AI Chain (MAC) ProjectAlexandra N. Martinez

SEW make Brake BE05 – BE30 Brake – Repair Kitprojectultramechanix

First Come First Serve Scheduling in real time operating system.pptxKavitaBagewadi2

NALCO Green Anode Plant,Compositions of CPC,Pitcharpitprachi123

362 Alec Data Center Solutions-Slysium Data Center-AUH-ABB Furse.pdfdjiceramil

4th International Conference on Computer Science and Information Technology (...ijait

4th International Conference on Computer Science and Information Technology (COMSCI 2025) will act as a major forum for the presentation of innovative ideas, approaches, developments, and research projects in the area computer Science and Information Technology. It will also serve to facilitate the exchange of information between researchers and industry professionals to discuss the latest issues and advancement in the research area.

FINAL 2013 Module 20 Corrosion Control and Sequestering PPT Slides.pptxkippcam

362 Alec Data Center Solutions-Slysium Data Center-AUH-Glands & Lugs, Simplex...djiceramil

Fundamentals of Digital Design_Class_12th April.pptxdrdebarshi1993