Ibm db2 10.5 for linux, unix, and windows installing ibm data server clients

IBM DB2 10.5
for Linux, UNIX, and Windows
Installing IBM Data Server Clients
Updated October, 2014
GC27-5515-01

Note
Before using this information and the product it supports, read the general information under Appendix C, “Notices,” on
page 65.
Edition Notice
This document contains proprietary information of IBM. It is provided under a license agreement and is protected
by copyright law. The information contained in this publication does not include any product warranties, and any
statements provided in this manual should not be interpreted as such.
You can order IBM publications online or through your local IBM representative.
v To order publications online, go to the IBM Publications Center at http://www.ibm.com/shop/publications/
order
v To find your local IBM representative, go to the IBM Directory of Worldwide Contacts at http://www.ibm.com/
planetwide/
To order DB2 publications from DB2 Marketing and Sales in the United States or Canada, call 1-800-IBM-4YOU
(426-4968).
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any
way it believes appropriate without incurring any obligation to you.
© Copyright IBM Corporation 1993, 2014.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
About this publication . . . . . . . . v
Part 1. IBM data server clients . . . . 1
Chapter 1. Introduction to IBM data
server clients . . . . . . . . . . . . 3
IBM data server clients and drivers overview . . . 3
IBM Data Server Driver Package overview . . . . 3
Connections to midrange and mainframe databases . 4
Command line processor plus (CLPPlus) . . . . . 4
Combinations of clients, drivers, and server levels . . 5
Part 2. Installing the IBM Data Server
Driver Package . . . . . . . . . . . 7
Chapter 2. IBM Data Server Driver
Package installation requirements . . . 9
Disk and memory requirements . . . . . . . . 9
Installation requirements (Windows) . . . . . . 9
Installation requirements (Linux and UNIX) . . . 10
Chapter 3. Installing IBM Data Server
Driver Package . . . . . . . . . . . 11
Windows . . . . . . . . . . . . . . . 11
Installing the IBM Data Server Driver Package
(Windows). . . . . . . . . . . . . . 11
Command-line options to install the IBM Data
Server Driver Package (Windows) . . . . . . 11
Linux and UNIX. . . . . . . . . . . . . 13
Installing the IBM Data Server Driver Package
(Linux and UNIX) . . . . . . . . . . . 13
Part 3. Database connections for
the IBM Data Server Driver Package 15
Chapter 4. Client-to-server
communications configuration
overview . . . . . . . . . . . . . . 17
Chapter 5. Communication protocols 19
Chapter 6. db2dsdriver configuration
file . . . . . . . . . . . . . . . . 21
Chapter 7. db2dsdcfgfill - Create
configuration file db2dsdriver.cfg . . . 25
Chapter 8. Validating the IBM Data
Server Driver Package installation . . . 27
Testing client-to-server communications using
CLPPlus . . . . . . . . . . . . . . . 27
Testing client-to-server connections using CLI . . . 27
Testing client-to-server connections using ADO.NET 29
Part 4. IBM Data Server Driver
Package merge modules . . . . . . 33
Chapter 9. IBM Data Server Driver
Package instance merge modules
(Windows) . . . . . . . . . . . . . 35
Part 5. Uninstalling . . . . . . . . 37
Chapter 10. Uninstalling the IBM Data
Server Driver Package (Windows) . . . 39
Chapter 11. Uninstalling the IBM Data
Server Driver Package (Linux and
UNIX) . . . . . . . . . . . . . . . 41
Part 6. Appendixes. . . . . . . . . 43
Chapter 12. IBM Data Server Client
overview . . . . . . . . . . . . . . 45
Chapter 13. Installing IBM data server
clients and drivers (Windows). . . . . 47
Chapter 14. Installing IBM data server
clients (Linux and UNIX) . . . . . . . 51
Chapter 15. Uninstalling an IBM data
server client . . . . . . . . . . . . 53
Part 7. Appendixes. . . . . . . . . 55
Appendix A. DB2 database product and
packaging information . . . . . . . . 57
Appendix B. DB2 technical information 59
DB2 technical library in hardcopy or PDF format . . 60
Displaying SQL state help from the command line
processor . . . . . . . . . . . . . . . 62
Accessing DB2 documentation online for different
DB2 versions . . . . . . . . . . . . . . 62
Terms and conditions . . . . . . . . . . . 63
Appendix C. Notices . . . . . . . . . 65
© Copyright IBM Corp. 1993, 2014 iii

Index . . . . . . . . . . . . . . . 69
iv Installing IBM Data Server Clients

About this publication
If you are interested in installing and configuring an IBM data server clients or
driver, setting up a thin client, or DB2 Connect™
thin client environment, you
should read this book.
© Copyright IBM Corp. 1993, 2014 v

vi Installing IBM Data Server Clients

Part 1. IBM data server clients
© Copyright IBM Corp. 1993, 2014 1

2 Installing IBM Data Server Clients

Chapter 1. Introduction to IBM data server clients
IBM data server clients and drivers overview
Several types of IBM®
data server clients and drivers are available. Each provides a
particular type of support.
The IBM data server client and driver types are as follows:
v IBM Data Server Driver Package
v IBM Data Server Driver for JDBC and SQLJ
v IBM Data Server Driver for ODBC and CLI
v IBM Data Server Runtime Client
v IBM Data Server Client
Each IBM data server client and driver provides a particular type of support:
v For Java™
applications only, use IBM Data Server Driver for JDBC and SQLJ.
v For applications using ODBC, CLI, .NET, OLE DB, PHP, Ruby, JDBC, CLPPlus or
SQLJ, use IBM Data Server Driver Package.
v For applications using DB2CI, use IBM Data Server Client.
v For command line processor (CLP), with function not available in the
recommended IBM Data Server Driver Package.
In general, it is recommended that you use the IBM Data Server Driver Package.
The IBM Data Server Driver Package has a small footprint and provides runtime
support for applications using ODBC, CLI, .NET, OLE DB, PHP, JDBC, or SQLJ,
without the need to install the IBM Data Server Runtime Client or IBM Data Server
Client. Information about the installation requirements, installation and
uninstallation procedure of the IBM Data Server Driver Package is discussed in
details throughout this book. You can find information about the IBM Data Server
Client in the Appendixes of this book
IBM Data Server Driver Package overview
The IBM Data Server Driver Package is a lightweight deployment solution that
provides runtime support for applications that use ODBC, CLI, .NET, OLE DB,
PHP, Ruby, JDBC, or SQLJ, without the need to install the Data Server Runtime
Client or Data Server Client .
This driver has a small footprint and is designed to be redistributed by
independent software vendors (ISVs). This driver is also designed to be used for
application distribution in mass deployment scenarios that are typical of large
enterprises.
The IBM Data Server Driver Package includes the following capabilities:
v DB2®
Command Line Processor Plus (CLPPlus) for dynamically creating, editing,
and running SQL statements and scripts.
v Support for applications that use ODBC, CLI, PHP, or Ruby to access databases.
v On Windows operating systems, support for applications that use .NET or OLE
DB to access databases. In addition, this driver package is available as an
installable image. Using merge modules, you can easily embed the driver in a
Windows Installer-based installation.

v Support for client applications and applets that you write in the Java language
by using JDBC and for embedded SQL for Java (SQLJ).
v Support for running embedded SQL applications. No precompiler or bind
capabilities are provided.
v Application header files to rebuild the PHP, Ruby, Python, and Perl drivers. The
Python and Perl drivers are not available in the IBM Data Server Driver
Package; however, you can download and build these drivers by using the
header files.
v Support for DB2 interactive CLI through the db2cli command.
v Support for DRDA®
traces through the db2drdat command.
Connections to midrange and mainframe databases
With the IBM Data Server Driver Package, you can connect to DB2 databases on
mainframe and midrange platforms, namely the OS/390®
and z/OS®
, System i®
,
z/VSE, and z/VM platforms. You can also connect to other databases that comply
with the Distributed Relational Database Architecture™
(DRDA) protocol.
To connect to a z/OS server or a System i server with the IBM Data Server Driver
Package, you must activate a DB2 Connect license key on the DB2 for z/OS
subsystem. To activate the license key on a DB2 for z/OS subsystem:
1. Ensure that Java Runtime Environment 1.4.2 or later is available on the DB2 for
Linux, UNIX, and Windows workstation from which you want to run the
activation utility.
2. From the activation_cd_rootconsv_zsdb2license directory, issue the
command for your operating system, with the appropriate options:
v On UNIX operating systems: db2connectactivate.sh options
v On Windows operating systems: db2connectactivate options
For more information on the db2connectactivate command, see the
db2connectactivate command topic in the DB2 Connect User's Guide.
You can connect to a midrange or mainframe database from a workstation in the
following ways:
v Install the IBM Data Server Driver Package locally and use it to connect directly
to a host.
v Connect to the same or different host through an intermediate DB2 Connect
server gateway.
Command line processor plus (CLPPlus)
Command line processor plus (CLPPlus) provides a command-line user interface
that you can use to connect to databases and to define, edit, and run statements,
scripts, and commands.
CLPPlus complements the functions that the command line processor (CLP)
provides. CLPPlus includes the following features:
v Support for establishing connections to databases when you provide a database
user ID and password.
v A buffer that you can use to store scripts, script fragments, SQL statements, SQL
PL statements, or PL/SQL statements for editing and then execution. You can
list, print, or edit the text in the buffer or run the text in the buffer as a batch
script.

v A comprehensive set of processor commands that you can use to define
variables and strings that you can store in the buffer.
v A set of commands that retrieve information about a database and database
objects.
v The ability to store buffers or buffer output in a file.
v Multiple options for formatting the output of scripts and queries.
v Support for executing system-defined routines.
v Support for executing operating system commands.
v An option for recording the output of executed commands, statements, or
scripts.
CLPPlus supports SERVER, SERVER_ENCRYPT, and KERBEROS authentication
only.
Combinations of clients, drivers, and server levels
Various versions of a client or driver can connect to different versions of a server
and DB2 databases on midrange and mainframe servers.
DB2 client levels required for IBM DB2 pureScale®
Feature
features
For your application to make full use of DB2 pureScale features, your DB2 client
must be at certain release levels:
Server version Client version Features available
Version 9.8 or later Version 9.7, Fix Pack 1 or later Transaction-level and connection-level workload balancing
Automatic client reroute based on workload
Client affinities
Version 9.8 or later Version 9.1,
Version 9.5, or
Version 9.7 (before Fix Pack 1)
Connection-level workload balancing (transaction-level
workload balancing is not available)
Automatic client reroute based on workload
Combinations of DB2 Version 9.1, DB2 Version 9.5, DB2 Version
9.7, and DB2 Version 10.1 clients and servers
Generally, DB2 Version 9.1, DB2 Version 9.5, and DB2 Version 9.7 clients can access
a remote DB2 Version 10.1 server. However, if different versions of a client and a
DB2 server are located on the same system, local client-to-server connections using
Interprocess Communication (IPC) are not supported. Instead, you can establish a
connection as a remote connection (called a loopback connection) by using TCP/IP.
The IBM Data Server Driver Package can access servers of a later or earlier version.
However, when a later version driver accesses an earlier version server, the
functionality of the later version is not available to the client. For example, IBM
Data Server Driver Package Version 10.1 can access a DB2 Version 9.1 server;
however, DB2 Version 9.7 functionality is not available to the client. To use the
latest functionality of the server, migrate to the latest version of the server.
Chapter 1. Introduction to IBM data server clients 5

Combinations of DB2 Version 10.1 and DB2 products on
midrange and mainframe platforms
DB2 servers support access from the following clients on midrange and mainframe
platforms:
v DB2 for z/OS and OS/390 Version 8 or later
v DB2 for i5/OS™
Version 5 or later
v DB2 for VM and VSE Version 7

Part 2. Installing the IBM Data Server Driver Package

Chapter 2. IBM Data Server Driver Package installation
requirements
Disk and memory requirements
Ensure that an appropriate amount of disk space is available for the installation of
the IBM Data Server Driver Package, and allocate memory accordingly.
Disk requirements
The minimum disk space that is required for the IBM Data Server Driver Package
is approximately 130 MB.
Memory requirements
Because the IBM Data Server Driver Package has a smaller footprint than that of
the IBM Data Server Runtime Client and IBM Data Server Client, the RAM that is
required is very small: approximately 512 MB.
Installation requirements (Windows)
The following restrictions apply to installing the IBM Data Server Driver Package:
v You must install the IBM Data Server Driver Package separately.
v You cannot install any other database product in the same path as the IBM Data
Server Driver Package.
v For JDBC and embedded SQL for Java (SQLJ), the IBM Data Server Driver
Package supports only the DB2 JDBC type 4 driver.
v Installation of multiple copies of the IBM Data Server Driver Package is an
advanced installation method that is not recommended for most users.
v The default installation path of the IBM Data Server Driver Package is Program
FilesIBMIBM DATA SERVER DRIVER. If you install multiple copies of the IBM
Data Server Driver Package on the same machine, the default directory name is
Program FilesIBMIBM DATA SERVER DRIVER_nn, where nn is the generated
number that makes the directory name unique. For example, if you install a
second copy on the same machine, the default directory name is Program
FilesIBMIBM DATA SERVER DRIVER_02.
To install the IBM Data Server Driver Package package, obtain the compressed file
that contains this driver package:
1. Go to the IBM Support Fix Central website (www.ibm.com/support/fixcentral/
).
2. From the Product Group list, select Information Management.
3. From the Product list, select IBM Data Server Driver Packages.
4. From the Installation Version list, select a particular version or all versions.
5. From the Platform list, select a particular platform or all platforms, and click
Continue.
Click Continue again on the next screen and you are presented with a list of all
client and driver packages that are available for your platform.

Installation requirements (Linux and UNIX)
The following restrictions apply to IBM Data Server Driver Package in Linux and
UNIX operating systems:
v You must install the IBM Data Server Driver Package separately.
v You cannot install any other database product in the same path as the IBM Data
To install the IBM Data Server Driver Package, obtain the compressed file that
contains this driver package:
1. Go to the IBM Support Fix Central website (www.ibm.com/support/fixcentral/
).
3. From the Product list, select IBM Data Server Driver Packages.
Continue.
Click Continue again on the next screen and you are presented with a list of all
client and driver packages that are available for your platform.

Chapter 3. Installing IBM Data Server Driver Package
Windows
Installing the IBM Data Server Driver Package (Windows)
The procedure to install the IBM Data Server Driver Package on Windows
operating systems is described in the following section.
Procedure
To install the IBM Data Server Driver Package from a fix pack image on a
Windows operating system:
1. From the IBM Support Fix Central website (www.ibm.com/support/fixcentral/
), download the driver package that contains the setup program.
2. To begin installing the downloaded IBM Data Server Driver Package, run the
setup executable.
3. Accept the terms of the license agreement.
4. Select the installation path for the IBM Data Server Driver Package.
5. Provide the IBM Data Server Driver Package copy name, which should be the
location in which the package is installed. The default copy name is
IBMDBCL1.
6. Make sure that all the appropriate paths are specified by verifying the
installation settings.
Results
The IBM Data Server Driver Package is now installed at the location that you
specified during the installation process.
What to do next
You can optionally create and populate the db2dsdriver.cfg configuration file with
database directory information.
Command-line options to install the IBM Data Server Driver
Package (Windows)
You can install the GA level IBM Data Server Driver Package by running the
DB2setup command from the command line. For fix pack level images run the
downloaded exe file from the command line.
The command-line options for installing the IBM Data Server Driver Package are
as follows. For more information about the Windows Installer options, see
http://www.msdn.microsoft.com/.
/n [copy_name]
Specifies the copy name that you want the installation to use. If the copy
exists, a maintenance installation is performed on that copy. Otherwise, a
new installation is performed by using the specified copy name. Specifying
this option overrides the installation path in the response file.

/o Specifies that a new copy installation with a generated default copy name
is to be performed.
/u [response_file]
Specifies the full path and file name of the response file.
/m Shows the progress window during the installation. However, you are not
prompted for any input. Use this option with the /u option.
/l [log_file]
Specifies the full path and file name of the log file.
/p [install_directory]
Changes the installation path of the product. Specifying this option
overrides the installation path in the response file.
/i language
Specifies the two-letter language code of the language in which to perform
the installation.
/? Generates usage information.
The following examples show how to use some of the command-line parameters
for a GA level image using the setup command:
v To install a new copy with a generated default copy name, issue the following
command:
setup /o
v To install a second copy, issue the following command:
setup /n "copy_name"
v To perform a response file installation, issue the following command:
setup /u "[Full path to the response file]"
A sample response file is located in the samples subdirectory.
The following examples show how to use some of the command-line parameters
for a Fix pack level image using the exe file:
v To install a new copy with a generated default copy name, issue the following
command:
v<version>.<release>fp<fixpack>_<bitlevel>_dsdriver_ALL_LANG.exe /o
For example to install a new copy of the Version 10.5 Fix Pack 1 image on a
64-bit operating system, issue the following command:
v10.5fp1_ntx64_dsdriver_ALL_LANG.exe /o
v To install a second copy , issue the following command:
v<version>.<release>fp<fixpack>_<bitlevel>_dsdriver_ALL_LANG.exe /n "copy_name"
For example to install a second copy of the Version 10.5 Fix Pack 1 image on a
64-bit operating system, issue the following command:
v10.5fp1_ntx64_dsdriver_ALL_LANG.exe /n
v To perform a response file installation, use the following command:
v<version>.<release>fp<fixpack>_<bitlevel>_dsdriver_ALL_LANG.exe /u "[Full path to the response file]"
For example to install the Version 10.5 Fix Pack 1 image on a 64-bit operating
system, issue the following command:
v10.5fp1_ntx64_dsdriver_ALL_LANG.exe /u "[Full path to the response file]"

Linux and UNIX
Installing the IBM Data Server Driver Package (Linux and
UNIX)
On Linux and UNIX operating systems, the IBM Data Server Driver Package is
installed by running the installDSDriver command. This driver package includes
database drivers for Java, ODBC/CLI, PHP, and Ruby on Rails, each of which is
stored in its own subdirectory. The Java and ODBC/CLI drivers are compressed.
Procedure
To install the IBM Data Server Driver Package:
1. Uncompress the IBM Data Server Driver Package archive.
2. Copy the files onto the target machine.
3. For the Java and ODBC/CLI drivers, uncompress the driver file into your
chosen installation directory on the target machine.
4. Optional: Remove the compressed driver file.
What to do next
You can optionally create and populate the db2dsdriver.cfg configuration file with
data source information.
Chapter 3. Installing IBM Data Server Driver Package 13

Part 3. Database connections for the IBM Data Server Driver
Package

Chapter 4. Client-to-server communications configuration
overview
To choose a suitable method for configuring client-to-server communications, you
should understand the components and scenarios that are involved in
client-to-server communications.
The basic components of client-to-server communications are as follows:
Client The initiator of the communications. This role is taken by the IBM Data
Server The receiver of the communications request from the client. This role is
normally filled by a DB2 for Linux, UNIX, and Windows server product.
When DB2 Connect products are present, the term server can also mean a
DB2 server on a midrange or mainframe platform.
Communications protocol
The protocol that is used to send data between the client and server. The
DB2 product supports the following protocols:
v TCP/IP. The version can be TCP/IPv4 or TCP/IPv6.
v Named Pipes. This option is available on Windows operating systems
only.
An additional component applies in some environments:
Lightweight Directory Access Protocol (LDAP)
In an LDAP-enabled environment, it is not necessary to configure
client-to-server communications. When a client attempts to connect to a
database that does not exist in the database directory on the local machine,
the LDAP directory is searched for information that is required to connect
to the database.
An example of using client-to-server communications is the IBM Data Server
Driver Package establishing communications with a DB2 server by using TCP/IP.
When setting up a server to work with development environments such as IBM
Data Studio, you might encounter error message SQL30081N at the initial DB2
connection. A possible cause is that the firewall at the remote database server
prevented the connection from being established. In this case, verify that the
firewall is correctly configured to accept connection requests from the client.

Chapter 5. Communication protocols
The supported protocols for connecting from the IBM Data Server Driver Package
to a DB2 server include the following ones:
v Connecting from an IBM data server client to midrange or mainframe hosts by
using DB2 Connect products
v Connecting from midrange or mainframe platforms to DB2 for Linux, UNIX, and
Windows databases
The TCP/IP protocol is supported on all operating systems on which DB2 for
Linux, UNIX, and Windows software is available. Both TCP/IPv4 and TCP/IPv6
are supported. IPv4 addresses have a four-part structure, for example, 9.11.22.314.
IPv6 addresses have an eight-part structure, where each part consists of four
hexadecimal digits that are delimited by a colon. Two colons (::) represent one or
more sets of zeros, for example, 2001:0db8:4545:2::09ff:fef7:62dc.
DB2 database products also support the SSL protocol and accept SSL requests from
applications that use the IBM Data Server Driver Package.
In addition, the Windows Named Pipes protocol is supported on Windows
networks.
Functionality supported with restrictions
The IBM Data Server Driver Package supports certain functionality with
restrictions:
v Lightweight Directory Access Protocol (LDAP) is supported, but the LDAP cache
is not saved to disk. There is no local database directory. Instead of the local
database directory, the db2dsdriver.cfg configuration file is used. The
db2dsdriver.cfg configuration file provides more control over the configuration
of the IBM Data Server Driver Package than the database directory allows.
v Runtime support for embedded SQL is available with the following restrictions:
– Support is runtime only; there is no PREP or BIND command capability. With
embedded SQL, you must issue the PREP or BIND command with the IBM
Data Server Client first and then deploy the command with the IBM Data
– Sysplex capabilities are not supported.
– APIs for loading data (db2Load and db2LoadQuery), exporting data
(db2Export), and importing data (db2Import) are not supported.
v Executing an embedded compound statement with substatements is not
supported.
Unsupported functionality
The following functionality is not supported:
v The DB2 command line processor (CLP)
v Administrative APIs
v CLIENT type authentication

Chapter 6. db2dsdriver configuration file
The db2dsdriver.cfg configuration file contains database directory information
and client configuration parameters in a human-readable format.
The db2dsdriver.cfg configuration file is an XML file that is based on the
db2dsdriver.xsd schema definition file. The db2dsdriver.cfg configuration file
contains various keywords and values that you can use to enable various features
to a supported database through ODBC, CLI, .NET, OLE DB, PHP, or Ruby
applications. You can associate the keywords globally, with all database
connections, or you can associate keywords with a specific database source name
(DSN) or database connection. You can also use this configuration file to enable
high availability connection to databases.
db2dsdriver configuration file structure
The scope of configuration keywords and their associated values are defined by
the position of the keywords in the db2dsdriver.cfg file. Depending on the
position of the configuration keyword, the keyword can have a global effect
(affecting all connections), or it might affect only the specific connection made to a
database or alias. You can specify some keywords in only in a specific section. The
db2dsdriver.cfg configuration file contains the following sections:
Data source name
This section is contained within the <dsncollection> and
</dsncollection> tags. Keywords in this section apply only to a particular
data source name.
Database information
This section is contained within the <databases> and </databases> tags.
Keywords in this section apply only to a particular database connection.
To enable high availability features, you can define two subsections in the
database information section:
Workload balancing
This subsection is contained within the <wlb> and </wlb> tags. In
this subsection, you specify keywords that are related to workload
balancing.
Automatic client reroute
This subsection is contained within the <acr> and </acr> tags. In
this subsection, you specify parameters that are related to
automatic client reroute.
Global attributes
This section is contained within the <parameters> and </parameters> tags.
Parameters in this section apply to all databases and aliases.
LDAP This section is contained within the <ldapserver> and </ldapserver> tags.
You can be use this section to specify LDAP server information.
Example of a db2dsdriver.cfg file
The following sample db2dsdriver.cfg configuration file has a data source name
section (which uses <dsncollection> and </dsncollection> tags), a database

information section (which uses <database> and </database> tags), and a global
attributes section (which uses <parameters> and </parameters> tags):
<configuration>
<dsncollection>
<dsn alias="alias1" name="name1" host="server1.net1.com" port="50001"/>

<dsn alias="longaliasname2" name="name2" host="server2.net1.com" port="55551">
<parameter name="Authentication" value="Client"/>
</dsn>
</dsncollection>
<databases>
<database name="name1" host="server1.net1.com" port="50001">
<parameter name="CurrentSchema" value="OWNER1"/>
<wlb>
<parameter name="enableWLB" value="true"/>
<parameter name="maxTransports" value="50"/>
</wlb>
<acr>
<parameter name="enableACR" value="true"/>
</acr>
</database>
</databases>
<parameters>
<parameter name="GlobalParam" value="Value"/>
</parameters>
</configuration>
db2dsdriver configuration file restrictions
The following restrictions apply to the db2dsdriver.cfg configuration file:
v The db2dsdriver.cfg configuration file supports a consistent set of lowercase
XML tags. The underscore (_) is not supported. XML tag attributes, between
which you specify IBM Data Server Driver Package configuration keywords, can
contain uppercase, lowercase, and underscore (_) characters.
v The configuration file cannot contain multiple identical entries for a database
with the following properties: database name, server name, and port number. In
addition, the configuration file cannot contain multiple identical database alias
entries.
v The <dsncollection> entries (alias, name, host, and port) and the <database>
entries (name, host, port) must contain a value.
v If you define multiple parameters on a single line, they are ignored.
db2dsdriver configuration file location
The db2dsdriver.cfg configuration file is not provided with DB2 software. Instead,
the db2dsdriver.cfg.sample sample configuration file is provided to help you get
started. Use the contents of the db2dsdriver.cfg.sample file to create a
db2dsdriver.cfg file in the same location as the sample configuration file. The
location of the sample configuration file depends on your driver type and
operating system. For the IBM Data Server Driver Package, the configuration file is
created in one of the following paths:
v On AIX®
, HP-UX, Linux, or Solaris operating systems: install_path/cfg
v On Windows Server 2003: C:Documents and SettingsAll UsersApplication
DataIBMDB2driver_copy_namecfg
v On Windows 7 and Windows Server 2008: C:ProgramDataIBMDB2
driver_copy_namecfg

You can use the DB2DSDRIVER_CFG_PATH registry variable to specify a different
location for the db2dsdriver.cfg file.
You can copy and edit the db2dsdriver.cfg configuration file. After editing the file,
you must restart your ODBC, CLI, .NET, OLE DB, PHP, or Ruby applications for
the changes to take effect.
If you have the IBM Data Server Runtime Client or IBM Data Server Client, you
can copy the existing database directory information into the db2dsdriver.cfg
configuration file by using the db2dsdcfgfill command. When you run this
command, the configuration file is populated based on the contents of the local
database directory, node directory, and Database Connection Services (DCS)
directory of a specific database manager instance.
The IBM Data Server Client and IBM Data Server Runtime Client can catalog
remote databases locally, and you can define client parameters for the databases
that are cataloged. The IBM Data Server Client and IBM Data Server Runtime
Client derive database, host, and port information from the catalog directory and
use that information to locate the corresponding entry in the db2dsdriver.cfg
configuration file.
Chapter 6. db2dsdriver configuration file 23

Chapter 7. db2dsdcfgfill - Create configuration file
db2dsdriver.cfg
After installing the IBM Data Server Driver Package, you can run the
db2dsdcfgfill command to create and populate the db2dsdriver.cfg configuration
file in a human-readable format.
Description
The db2dsdcfgfill command copies database directory information from either the
IBM Data Server Client or IBM Data Server Runtime Client to the db2dsdriver.cfg
configuration file.
Command syntax
db2dsdcfgfill -i instance_name
-p instance_path -o output_path
-migrateCliIniFor.NET -db2cliFile db2cli.ini_path
-h
Command parameters
-i instance_name
Specifies the name of the database manager instance whose database
directory, node directory, and Database Connection Services (DCS)
directory are used as input.
You cannot use this parameter with the -p or -migrateCliIniFor.NET
parameter.
-p instance_path
Specifies the full path of the database manager instance directory under
which the system database directory, node directory, and DCS directory are
located.
You cannot use this parameter with the -i or -migrateCliIniFor.NET
parameter.
-migrateCliIniFor.NET
Copies certain entries from the db2cli.ini file into the db2dsdriver.cfg
file. This parameter is for Microsoft Windows systems only. Only the
following keywords are migrated:
v Txnisolation
v Connecttimeout
v Currentschema
The keywords are migrated in the following manner:
v Entries in the common section of the db2cli.ini file are copied to the
global section of the db2dsdriver.cfg file.
v Entries that have a database name, host name, and port information are
copied to the database section.
v Entries for cataloged databases are copied to the data source name
section.

You cannot use this parameter with the -i or -p parameter.
Restriction: For .NET applications and applications that use embedded
SQL, the IBM Data Server Client and IBM Data Server Runtime Client can
use the db2dsdriver.cfg file to retrieve only Sysplex-related settings.
-db2cliFile db2cli.ini_path
Specifies the full path of the db2cli.ini file. This parameter is for
Microsoft Windows systems only.
-o output_path
Specifies the path where the db2dsdcfgfill command creates the
db2dsdriver.cfg configuration file.
If you do not specify a value for this parameter and you have a copy of
the db2dsdriver.cfg file from Version 9.7 Fix Pack 2 or earlier, that copy is
replaced. Otherwise, if you do not specify a value for this parameter, the
db2dsdriver.cfg configuration file is created in a directory that depends on
your driver type and operating system. For information about the location
of the db2dsdriver.cfg file, see the "db2dsdriver configuration file" topic in
Chapter 6 of this book.
-h Displays usage information.
Usage notes
When you run the db2dsdcfgfill command without the -migrateCliIniFor.NET
parameter, if a db2dsdriver.cfg configuration file already exists in the output
directory, the existing db2dsdriver.cfg configuration file is overwritten. However,
when the -migrateCliIniFor.NET option is used with an existing db2dsdriver.cfg
file, it will merge the information into the existing file instead.

Chapter 8. Validating the IBM Data Server Driver Package
installation
Testing client-to-server communications using CLPPlus
Follow the instructions to validate your installation of the IBM Data Server Driver
Package (ds driver) for CLPPlus.
To verify that CLPPlus works correctly:
1. At the operating system prompt, start CLPPlus by issuing the clpplus
command with the username and dsn_alias parameters. For the dsn_alias
parameter, specify the DSN alias sampledsn that is defined in the
db2dsdriver.cfg file.
clpplus username@sampledsn
2. When prompted, enter the password that is associated with the user name that
you provided.
A successful connection to the sampledsn DSN alias indicates that CLPPlus works
correctly. The following sample output shows the two-step verification process and
a successful connection:
C:>clpplus db2admin@sampledsn
CLPPlus: Version 1.4
Copyright (c) 2009, 2011, IBM CORPORATION. All rights reserved.
Enter password: **********
Database Connection Information :
---------------------------------
Hostname = samplehost.domain.com
Database server = DB2/NT SQL09074
SQL authorization ID = db2admin
Local database alias = SAMPLEDSN
Port = 19766
Testing client-to-server connections using CLI
Follow the instructions to validate your installation of the IBM Data Server Driver
Package (ds driver) by using CLI.
You can issue db2cli validate -dsn sampledsn to validate the DSN alias
sampledsn that is configured in the db2dsdriver.cfg file. If the entries are correct,
validation is successful.
Sample output for a Linux operating system is as follows:
C:Program FilesIBMIBM DATA SERVER DRIVERbin>db2cli validate -dsn
sampledsn
db2cli validate -dsn alias1
IBM DATABASE 2 Interactive CLI Sample Program
(C) COPYRIGHT International Business Machines Corp. 1993,1996
All Rights Reserved
Licensed Materials - Property of IBM
US Government Users Restricted Rights - Use, duplication or
disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
---------------------------------------------------------------------------
[ CLI Driver Version : 09.07.0000 ]
[ Informational Tokens : "DB2 v9.7.0.5","s111017","IP23292","Fixpack 5" ]

[ CLI Driver Type : IBM Data Server Driver For ODBC and CLI ]
---------------------------------------------------------------------------
db2dsdriver.cfg Schema Validation :
Success: The schema validation operation completed successfully.
The configuration file /home/hotel75/ashojose/DS/dsdriver/cfg/db2dsdriver.cfg
is valid
Note: The validation operation utility could not find the
configuration file named db2cli.ini.
The file is searched at /home/hotel75/ashojose/DS/dsdriver/cfg/db2cli.ini
db2dsdriver.cfg Validation :
---------------------------------------------------------------------------
[ DB2DSDRIVER_CFG_PATH env var : unset ]
[ db2dsdriver.cfg Path : /home/hotel75/ashojose/DS/dsdriver/cfg/
db2dsdriver.cfg ]
---------------------------------------------------------------------------
[ Valid keywords used for DSN : alias1 ]
Keyword Value
--------------------------------------------------
DATABASE name1
HOSTNAME server1.net1.com
PORT 50001
CURRENTSCHEMA OWNER1
[ Parameters used for WLB ]
Parameter Value
--------------------------------------------------
enableWLB true
maxTransports 50
[ Parameters used for ACR ]
Parameter Value
--------------------------------------------------
enableACR true
The validation completed.
On Windows operating systems, the db2cli validate command output includes
the DB2 copy name, as shown in the following example:
>db2cli validate -dsn sampledsn
IBM DATABASE 2 Interactive CLI Sample Program
(C) COPYRIGHT International Business Machines Corp. 1993,1996
All Rights Reserved
Licensed Materials - Property of IBM
US Government Users Restricted Rights - Use, duplication or
disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
---------------------------------------------------------------------------
[ CLI Driver Version : 09.07.0000 ]
[ Informational Tokens : "DB2 v9.7.500.702","s111017","IP23286","Fixpack 5"]
[ CLI Driver Type : IBM Data Server Driver Package ]
[ CLI Copy Name : IBMDBCL1 ]
---------------------------------------------------------------------------
db2dsdriver.cfg Schema Validation :
Success: The schema validation operation completed successfully.
The configuration file C:Documents and SettingsAll UsersApplication DataIBM
DB2IBMDBCL1cfgdb2dsdriver.cfg is valid
Note: The validation operation utility could not find the
configuration file named db2cli.ini.
The file is searched at C:Documents and SettingsAll UsersApplication DataIBM

DB2IBMDBCL1cfgdb2cli.ini
db2dsdriver.cfg Validation :
---------------------------------------------------------------------------
[ DB2DSDRIVER_CFG_PATH env var : unset ]
[ db2dsdriver.cfg Path : C:Documents and SettingsAll Users
Application DataIBMDB2IBMDBCL1cfgdb2dsdriver.cfg ]
---------------------------------------------------------------------------
[ Valid keywords used for DSN : alias1 ]
Keyword Value
--------------------------------------------------
DATABASE name1
HOSTNAME server1.net1.com
PORT 50001
CURRENTSCHEMA OWNER1
[ Parameters used for WLB ]
Parameter Value
--------------------------------------------------
enableWLB true
maxTransports 50
[ Parameters used for ACR ]
Parameter Value
--------------------------------------------------
enableACR true
---------------------------------------------------------------------------
The validation completed.
If you are using the DB2 Connect product but are not using the server-based
license key or a DB2 Connect server, you might get this message after attempting a
connection:
[IBM][CLI Driver] SQL1598N An attempt to connect to the database server failed
because of a licensing problem. SQLSTATE=42968
To resolve this error message, perform the following steps:
v If you are using the DB2 Connect Unlimited Edition for System z®
product, use
a server-based license key. This step prevents the need for client-based license
keys. For details, see the topic about activating the license key for the DB2
Connect Unlimited Edition for System z product in the DB2 Connect User's
Guide.
v If the preceeding step does not resolve the error message, place the DB2 Connect
license key from the DB2 Connect Edition product that you purchased (for
example, db2conpe.lic) into the C:Program FilesIBMIBM DATA SERVER
DRIVERlicense license directory, underneath the installation location for IBM
Data Server Driver Package.
After the db2dsdriver.cfg file is populated with the correct database connection
information, register the DSN alias with the ODBC driver manager as a data
source. On Windows operating systems, you can make the data source available to
all users of the system, as a system data source, or only to the current user, as a
user data source.
Testing client-to-server connections using ADO.NET
You can verify that DB2 ADO.NET drivers are installed correctly and are fully
operational by running the testconn20.exe utility. Perform the following steps to
validate your installation of the IBM Data Server Driver Package (ds driver) for
ADO.NET.
Chapter 8. Validating the IBM Data Server Driver Package installation 29

v To verify that DB2 ADO.NET drivers are installed correctly and are fully
operational by running the testconn20.exe utility:
1. Issue the -dtc command option to verify XA transaction support setup.
C:Program FilesIBMIBM DATA SERVER DRIVERbin>testconn20 -dtc "database=
sampledsn;uid=username;pwd=password"
adding MSDTC step
Step 1: Printing version info
.NET Framework version: 2.0.50727.3615
64-bit
DB2 .NET provider version: 9.0.0.2
DB2 .NET file version: 9.7.3.2
Capability bits: ALLDEFINED
Build: 20101113
Factory for invariant name IBM.Data.DB2 verified
Factory for invariant name IBM.Data.Informix verified
IDS.NET from DbFactory is Common IDS.NET
VSAI is not installed properly
Elapsed: 1.2969165
Step 2: Validating db2dsdriver.cfg against db2dsdriver.xsd schema file
C:ProgramDataIBMDB2IBMDBCL1cfgdb2dsdriver.cfg against
C:ProgramDataIBMDB2IBMDBCL1cfgdb2dsdriver.xsd
Elapsed: 0
Step 3: Connecting using "database=sampledsn;uid=username;pwd=password"
Server type and version: DB2/NT 09.07.0003
Elapsed: 2.8594665
Step 4: Selecting rows from SYSIBM.SYSTABLES to validate existence of
packages SELECT * FROM SYSIBM.SYSTABLES FETCH FIRST 5 rows only
Elapsed: 0.3281355
Step 5: Calling GetSchema for tables to validate existence of schema
functions
Elapsed: 0.906279
Step 6: Creating XA connection
DB2TransactionScope: Connection Closed.
Elapsed: 3.2657295
Test passed.
You can ignore the error message VSAI is not installed properly. This
error occurs because VSAI is available only in a 32-bit version and is not
detected by a 64-bit testconn20 utility. The 32-bit version of the testconn20
utility should correctly report VSAI information.
v To test connectivity to a particular server without adding an alias to the
db2dsdriver.cfg file, you can specify full connectivity information in the
connection string, as shown in the following example:
C:Program FilesIBMIBM DATA SERVER DRIVERbin>testconn20 -dtc "database=
sample;server=samplehost.domain.com:19766;uid=username;pwd=password"
v To test connectivity for your 32-bit applications that are running in a 64-bit
environment, you can use the 32-bit version of the testconn20 utility, as shown
in the following example:
C:Program FilesIBMIBM DATA SERVER DRIVERbin>testconn20_32 -dtc "database=
sampledsn;uid=username;pwd=password" adding MSDTC step
Step 1: Printing version info
.NET Framework version: 2.0.50727.3615
DB2 .NET provider version: 9.0.0.2

DB2 .NET file version: 9.7.3.2
Capability bits: ALLDEFINED
Build: 20101113
Factory for invariant name IBM.Data.DB2 verified
Factory for invariant name IBM.Data.Informix verified
IDS.NET from DbFactory is Common IDS.NET
VSAI assembly version: 9.1.0.0
VSAI file version: 9.7.3.1012
Elapsed: 1.0000192
Step 2: Validating db2dsdriver.cfg against db2dsdriver.xsd schema file
C:ProgramDataIBMDB2IBMDBCL1cfgdb2dsdriver.cfg against
C:ProgramDataIBMDB2IBMDBCL1cfgdb2dsdriver.xsd
Elapsed: 0
Step 3: Connecting using "database=sampledsn;uid=username;pwd=password"
Server type and version: DB2/NT 09.07.0003
Elapsed: 2.8594665
Step 4: Selecting rows from SYSIBM.SYSTABLES to validate existence of
packages SELECT * FROM SYSIBM.SYSTABLES FETCH FIRST 5 rows only
Elapsed: 0.3281355
Step 5: Calling GetSchema for tables to validate existence of schema
functions
Elapsed: 0.906279
Step 6: Creating XA connection
DB2TransactionScope: Connection Closed.
Elapsed: 3.2657295
Test passed.
Chapter 8. Validating the IBM Data Server Driver Package installation 31

Part 4. IBM Data Server Driver Package merge modules

Chapter 9. IBM Data Server Driver Package instance merge
modules (Windows)
Two types of merge modules are available: DB2 instance merge modules and IBM
Data Server Driver Package instance merge modules. It is recommended that you
use IBM Data Server Driver Package instance merge modules.
Using Windows Installer merge modules for the IBM Data Server Driver Package
instance, you can easily add IBM Data Server Driver Package functionality to any
product that uses the Windows Installer.
When you merge the modules, you are prompted to supply the copy name. You
can install multiple copies of IBM Data Server Driver Package products on the
same machine, so each copy is known by its unique name. You use this name
when installing on each target machine. Choose a name that is unlikely to already
be used for another IBM data server driver or DB2 copy. Suitable names include
the name of your application, for example, myapp_dsdrivercopy_1. If the name is
not unique, the installation fails.
For more information about merge module technology, see the documentation that
is included with your installation authoring product or at http://
msdn.microsoft.com.
The IBM Data Server Driver Package Merge Module.msm merge module provides
support for applications that use ODBC, CLI, .NET, OLE DB, PHP, Ruby, JDBC, or
SQLJ to access data. It also enables your application to use the IBM Data Server
Provider for .NET (IBM Data Server Provider for .NET and Informix®
.NET Data
Provider) software. The IBM Data Server Provider .NET software is an extension of
the ADO.NET interface that enables your .NET applications to quickly and
securely access data from DB2 or Informix databases.
You create the IBM Data Server Driver Package by using the merge module. The
process of registering the IBM Data Server Provider for .NET software is based on
the version of the .NET framework that is installed on your system. For example,
you must install Microsoft .NET framework 2.0 before the installation.
The following merge modules contain language-specific messages that are used by
the IBM Data Server Driver Package. Depending on the languages of your product,
include and install the components in the appropriate merge module.
IBM DSDRIVER Messages - Arabic.msm
IBM DSDRIVER Messages - Bulgarian.msm
IBM DSDRIVER Messages - Chinese(Simplified).msm
IBM DSDRIVER Messages - Chinese(Traditional).msm
IBM DSDRIVER Messages - Croatian.msm
IBM DSDRIVER Messages - Czech.msm
IBM DSDRIVER Messages - Danish.msm
IBM DSDRIVER Messages - Dutch.msm
IBM DSDRIVER Messages - English.msm
IBM DSDRIVER Messages - Finnish.msm
IBM DSDRIVER Messages - French.msm
IBM DSDRIVER Messages - German.msm
IBM DSDRIVER Messages - Greek.msm

IBM DSDRIVER Messages - Hebrew.msm
IBM DSDRIVER Messages - Hungarian.msm
IBM DSDRIVER Messages - Italian.msm
IBM DSDRIVER Messages - Japanese.msm
IBM DSDRIVER Messages - Korean.msm
IBM DSDRIVER Messages - Norwegian.msm
IBM DSDRIVER Messages - Polish.msm
IBM DSDRIVER Messages - Portuguese(Brazilian).msm
IBM DSDRIVER Messages - Portuguese(Standard).msm
IBM DSDRIVER Messages - Romanian.msm
IBM DSDRIVER Messages - Russian.msm
IBM DSDRIVER Messages - Slovak.msm
IBM DSDRIVER Messages - Slovenian.msm
IBM DSDRIVER Messages - Spanish.msm
IBM DSDRIVER Messages - Swedish.msm

Part 5. Uninstalling

Chapter 10. Uninstalling the IBM Data Server Driver Package
(Windows)
To uninstall the IBM Data Server Driver Package on Windows operating systems,
perform the following step.
Procedure
To uninstall the IBM Data Server Driver Package software on a Windows operating
system, use the Add/Remove Programs window, accessible through the Windows
Control Panel. For more information about removing software products from your
Windows operating system, refer to your operating system help.

Chapter 11. Uninstalling the IBM Data Server Driver Package
(Linux and UNIX)
To uninstall the IBM Data Server Driver Package on Linux and UNIX operating
systems, perform the following step.
Procedure
To uninstall the IBM Data Server Driver Package on a Linux or UNIX operating
system, remove the directory that contains the software by issuing rm -rf.

Part 6. Appendixes

Chapter 12. IBM Data Server Client overview
The IBM Data Server Client includes all the functionality of the IBM Data Server
Runtime Client, plus functionality for database administration, application
development, and client/server configuration.
The IBM Data Server Runtime Client provides a way to run applications on remote
databases. GUI tools are not included with the IBM Data Server Runtime Client.
The IBM Data Server Client includes the following capabilities:
v On Windows operating systems, the ability to prune the IBM Data Server Client
installation image to reduce its size.
v The following tools to set up and administer all replication programs for Q
replication and SQL replication: the Replication Center, the ASNCLP
command-line program, and the Replication Alert Monitor tool. The Replication
Center is available only on Linux and Windows operating systems.
v First Steps documentation for new users.
v Visual Studio tools.
v Application header files.
v Precompilers for various programming languages.
v Bind support.
v Samples and tutorials.

Chapter 13. Installing IBM data server clients and drivers
(Windows)
To simplify application deployment, install any IBM data server client type, namely
the IBM Data Server Client, the IBM Data Server Runtime Client, and the IBM
Data Server Driver Package.
Before you begin
If the machine has a DB2 database server product installed, it is not necessary to
install a client because the DB2 database server provides all the capability that is in
an IBM data server client.
If the machine has a prior version of a client installed, first review topics that cover
upgrading.
The IBM Data Server Driver Package software is not part of the IBM Data Server
Client or IBM Data Server Runtime Client software. This driver package is
different, and it has its own installation images. Use the appropriate installer
package.
Before installing IBM data server clients or client package, ensure you have
determined what client best suits your needs. Also, locate the DVD or other
installation image that you need. You can download an image for a release or a fix
pack from the IBM Support Fix Central site. You also need a Windows user
account that is part of the Administrators group. If you want to use a
non-Administrator user account to install the DB2 database product, you must
install the VS2005 runtime library first. The VS2005 runtime library is available
from the Microsoft runtime library download website. Choose the
vcredist_x86.exe file for 32-bit systems or the vcredist_x64.exe file for 64-bit
systems. You should also check that your system meets all memory, disk space,
and installation requirements. The installation program checks the disk space and
basis system requirements, and notifies you if there is a problem.
About this task
Restrictions
No other DB2 database product can be installed in the same path as IBM Data
Server Driver Package, if one of the following products is already installed:
v IBM Data Server Runtime Client
v IBM Data Server Driver Package
v DB2 Information Center
In addition, the DB2 Setup wizard fields do not accept non-English characters.
You can install a maximum of 16 copies of the Data Server Driver Package. You
must install each copy in a different directory.
If you are installing the Data Server Client on a machine that already has a DB2
Universal Database™
UDB Version 8 copy installed, you are presented with the
option to install a new copy or to upgrade the DB2 UDB Version 8 copy. Installing

a new copy preserves the DB2 UDB Version 8 copy and installs a newer DB2
Version 9 copy. Choosing to upgrade copies the DB2 UDB Version 8 client instance
settings to the newer DB2 Version, and then removes the DB2 UDB Version 8 copy.
If you are installing the Data Server Runtime Client, the installation program
always installs a new copy. To upgrade a DB2 UDB Version 8 client instance as a
subsequent step, see the topics on migration.
This installation does not include product documentation.
Procedure
To install any IBM data server client on a Windows operating system:
1. Log on to the system with the user account that is part of the Administrators
group
2. Optional: Shut down any programs running on the computer.
3. There are separate installation images for each language. The autorun feature
starts the DB2 Setup wizard, which determines the system language and starts
the setup program for that language.
v If you received a DVD, insert it into the drive. The autorun feature starts the
DB2 Setup wizard, which determines the system language and starts the
setup program for that language. You can run the DB2 Setup wizard in a
language other than the default system language by manually invoking the
DB2 Setup wizard and specifying a language code.
v If you downloaded an installation image, extract the file.
4. To install an IBM data server client or client package, choose one of the
following options.
v To install Data Server Client, after the DB2 Setup wizard opens, click Install
a Product and follow the DB2 Setup wizard's prompts.
v To install the Data Server Runtime Client, run the setup.exe command. For
setup command parameters, see the Related Links.
v Installing multiple copies of the Data Server Runtime Client is for advanced
users. To install a second copy of the run:
setup /v" TRANSFORMS=:InstanceId2.mst MSINEWINSTANCE=1"
To install each subsequent copy of the Data Server Runtime Client (up to a
maximum of 16 copies), modify the command by incrementing InstanceIdn,
for example:
setup /v" TRANSFORMS=:InstanceId2.mst MSINEWINSTANCE=1"
v To install the IBM Data Server Driver Package, run the setup command. For
setup command parameters or if you are installing a fix pack image, see the
Related Links.
To install a second copy of the IBM Data Server Driver Package, you can use
the following methods:
– To perform a new copy installation with a generated default copy name:
setup /o
– If the copy already exists, perform a new installation, specifying a copy
name:
setup /n copyname
If just one copy of IBM Data Server Driver Package software is installed, the
default installation path is Program FilesIBMIBM DATA SERVER DRIVER. For
additional copies, the default directory name is Program FilesIBMIBM DATA
SERVER DRIVER_nn, where nn is a generated number that makes the directory

name unique. For example, if you install a second copy on the same host, the
default directory name is Program FilesIBMIBM DATA SERVER DRIVER_02.
Results
After you complete this procedure, the product is installed at the location that you
specified during the installation or the default location. As part of the IBM Data
Server Client installation procedure, an instance of the DB2 database manager is
created. The instance is called DB2 if there is no other instance called DB2. If you
already have a copy of DB2 UDB Version 8 or DB2 Version 9.1 installed, the
default instance is DB2_01.
For a single copy, the default installation path of the Data Server Client and Data
Server Runtime Client is Program FilesIBMsqllib. If you install a second copy
on the same machine, the default directory name is sqllib_nn, where nn is the
number of copies installed on that machine minus one.
For a single copy, the default installation path of the Data Server Driver Package is
Program FilesIBMIBM DATA SERVER DRIVER. If you install a second copy on the
same machine, the default directory name is IBM DATA SERVER DRIVER_nn, where nn
is a generated number.
The default copy name of the IBM Data Server Driver Package software is
IBMDBCLn, where n is the number of copies installed. The default name of the
first driver on a machine is IBMDBCL1, the default name of the second driver on
the machine is IBMDBCL2, and so on.
The default copy name of the Data Server Client or Data Server Runtime Client is
DB2COPY1.
What to do next
v After installing the IBM Data Server Driver Package software, you can optionally
create the db2dsdriver.cfg configuration file and populate it with database
directory information.
v After installing your IBM data server client, the next step is to configure it to
access remote DB2 database servers.
Installing using a user account that is not a member of the Administrators group
Members of the Power Users group can install the IBM data server client. Members
of the Users group can also install an IBM data server client if a member of the
Administrators group ensures that the installing users have write permission for
the following areas:
v The HKEY_LOCAL_MACHINESOFTWARE registry branch
v The system directory (for example, c:WINNT)
v The default installation path (C:Program Files) or another installation path
A non-administrator can install fix packs if a non-administrator performed the
original installation. However, a non-administrator cannot install fix packs if an
Administrator user
Chapter 13. Installing IBM data server clients and drivers (Windows) 49

Chapter 14. Installing IBM data server clients (Linux and
UNIX)
To install an IBM data server client on Linux or UNIX operating systems, perform
the following instructions. The instructions apply to the IBM Data Server Client
and the IBM Data Server Runtime Client.
Before you begin
v If the machine already has an earlier version of a client installed, review the
topics that cover upgrading.
v Determine whether the IBM Data Server Client or the IBM Data Server Runtime
Client best suits your needs.
v Locate a DVD or other installation image that you need. To download an image,
1. Go to the IBM Support Fix Central website (www.ibm.com/support/
fixcentral/).
3. From the Information Management product list, select IBM Data Server
Client Packages.
Continue.
v Ensure that your system meets all memory, disk space, and installation
requirements. The installation program checks the disk space and basic system
requirements and notifies you if there is a problem.
v If you are installing an IBM data server client on a Solaris or HP-UX operating
system, you must update your kernel configuration parameters. This step is also
recommended for Linux operating systems.
v If you are installing your DB2 product on an NFS-mounted file system, you
must verify that Network File System (NFS) is running.
About this task
If the machine already has a DB2 database server product installed, it is not
necessary to install a client because the DB2 database server provides all the
capabilities of the IBM Data Server Client software.
Procedure
To install any IBM data server client on a Linux or UNIX operating system:
1. Insert and mount the appropriate DVD.
2. In the directory where the DVD is mounted, start the DB2 Setup wizard by
entering ./db2setup .
3. When the DB2 Launchpad opens, choose Install a Product.
4. Select the client that you want to install.
5. Follow the prompts in the DB2 Setup wizard. Help is available in the wizard to
guide you through the remaining steps.

Results
When installation is complete, the IBM data server client is installed in the
following directories by default:
Linux operating systems
/opt/ibm/db2/V10.5
UNIX operating systems
/opt/IBM/db2/V10.5
What to do next
This installation does not include product documentation.
After installing your IBM data server client, configure it to access a remote DB2
server.
National language installations
You can run the DB2 Setup wizard in a language other than the default system
language by manually invoking the DB2 Setup wizard and specifying a language
code. For example, the ./db2setup -i fr command runs the DB2 Setup wizard in
French. However, the DB2 Setup wizard fields do not accept non-English
characters.
Installing on a machine that has an existing DB2 Version 9.5 client
The default directory name for the first copy is V10.5. For additional copies on a
particular machine, the default directory name is V10.5_nn, where nn refers to the
number of copies that are installed minus one. For example, the second installation
has a default directory name of V10.5_01.
Installing the IBM Data Server Client or IBM Data Server Runtime Client on a
system that already has a DB2 Version 9 client preserves that copy and installs an
additional DB2 Version 9.5 or higher copy. For information about upgrading client
instances to DB2 Version 9.5 or higher, see the upgrading topics.

Chapter 15. Uninstalling an IBM data server client
To uninstall an IBM data server client, perform the following steps.
Procedure
v To uninstall an IBM data server client on a Linux or UNIX operating system,
issue db2_deinstall -a from the DB2DIR/install directory, where DB2DIR is the
location that you specified when you installed the data server client.
v To uninstall an IBM data server client on a Windows operating system, use one
of the following options:
– For any client, use the Add/Remove Programs window, accessible through
the Windows Control Panel. For more information about removing software
products from your Windows operating system, refer to your operating
system help.
– For the IBM Data Server Client, run the db2unins command. For more
information, see the db2unins command topic in the Command Reference
documentation.

Part 7. Appendixes

Appendix A. DB2 database product and packaging
information
DB2 database products are available in several different editions. There are also
optional DB2 features. Some DB2 database products and features are only available
on specific operating systems.
The following tables list the DB2 database products and features that are available
on each operating system.
Table 1. Availability of DB2 database products and features on UNIX operating systems
DB2 database products and features AIX
HP-UX on
IA-64
hardware
Solaris on
UltraSPARC
hardware
Solaris on
x86-64 ("x64")
hardware
DB2 Advanced Enterprise Server Edition Yes Yes Yes Yes
DB2 Enterprise Server Edition Yes Yes Yes Yes
DB2 Workgroup Server Edition Yes Yes Yes Yes
DB2 Personal Edition No No No No
DB2 Express®
Server Edition No No No Yes
DB2 Express-C No No No Yes
Data Server Client and Data Server
Runtime Client
Yes Yes Yes Yes
DB2 Advanced Access Control Feature Yes Yes Yes Yes
IBM DB2 High Availability Feature for
Express Edition
No No No Yes
IBM Homogeneous Replication Feature
for DB2 Enterprise Server Edition
Yes Yes Yes Yes
IBM DB2 Performance Optimization
Feature for Enterprise Server Edition
Yes Yes Yes Yes
DB2 Storage Optimization Feature Yes Yes Yes Yes
Table 2. Availability of DB2 database products and features on Linux operating systems
DB2 database products and features
Linux on
x86-32
hardware
Linux on
x64
hardware
Linux on
IBM Power
Systems™
Linux on
System z
DB2 Advanced Enterprise Server Edition No 1
Yes Yes Yes
DB2 Enterprise Server Edition No 1
Yes Yes Yes
DB2 Workgroup Server Edition Yes Yes Yes No
DB2 Personal Edition Yes Yes No No
DB2 Express Server Edition Yes Yes Yes No
DB2 Express-C Yes Yes Yes No
Runtime Client
Yes Yes Yes Yes
DB2 Advanced Access Control Feature No 1
Yes Yes Yes
DB2 Geodetic Data Management Feature No 1
Yes No Yes
IBM DB2 High Availability Feature for
Express Edition
Yes Yes Yes No
IBM Homogeneous Replication Feature for
DB2 Enterprise Server Edition
No 1
Yes Yes Yes

Table 2. Availability of DB2 database products and features on Linux operating
systems (continued)
Linux on
x86-32
hardware
Linux on
x64
hardware
Linux on
IBM Power
Systems™
Linux on
System z
No 1
Yes Yes Yes
DB2 Storage Optimization Feature No 1
Yes Yes Yes
Note:
1. Only test and development are supported in DB2 Enterprise Server Edition for Linux on x86-32
hardware. However, you can use DB2 Enterprise Server Edition for Linux on x86-32 as a try and
buy or by installing the Developer Edition license certificate onto a trial copy.
Table 3. Availability of DB2 database products and features on Windows operating systems
Windows 7
(32-bit
editions)
Windows 7
(64-bit
editions) on
x86 64-bit
("x64")
hardware
Windows
Server 2003,
Windows
Server 2008
(32-bit
editions)
Windows
Server 2003,
Windows
Server 2008
(64-bit
editions) on
x64 hardware
DB2 Advanced Enterprise Server
Edition
No 1
No 1
Yes Yes
DB2 Enterprise Server Edition No 1
No 1
Yes Yes
DB2 Workgroup Server Edition Yes Yes Yes Yes
DB2 Personal Edition Yes Yes Yes Yes
DB2 Express Server Edition Yes Yes Yes Yes
DB2 Express-C Yes Yes Yes Yes
Runtime Client
Yes Yes Yes Yes
DB2 Advanced Access Control
Feature
No 1
No 1
Yes Yes
DB2 Geodetic Data Management
Feature
No 1
No 1
Yes Yes
IBM DB2 High Availability Feature
for Express Edition
Yes Yes Yes Yes
IBM Homogeneous Replication
Feature for DB2 Enterprise Server
Edition
No 1
No 1
Yes Yes
No 1
No 1
Yes Yes
DB2 Storage Optimization Feature No 1
No 1
Yes Yes
Note:
1. Only test and development are supported in DB2 Advanced Enterprise Server Edition, DB2
Enterprise Server Edition, and Developer Edition on Windows .
For information about DB2 database product and packaging information, see
http://www-1.ibm.com/support/docview.wss?rs=73&uid=swg21219983.
For information about DB2 Express-C, see: www.ibm.com/software/data/db2/
express

Appendix B. DB2 technical information
DB2 technical information is available in multiple formats that can be accessed in
multiple ways.
DB2 technical information is available through the following tools and methods:
v Online DB2 documentation in IBM Knowledge Center:
– Topics (task, concept, and reference topics)
– Sample programs
– Tutorials
v Locally installed DB2 Information Center:
– Topics (task, concept, and reference topics)
– Sample programs
– Tutorials
v DB2 books:
– PDF files (downloadable)
– PDF files (from the DB2 PDF DVD)
– Printed books
v Command-line help:
– Command help
– Message help
Important: The documentation in IBM Knowledge Center and the DB2
Information Center is updated more frequently than either the PDF or the
hardcopy books. To get the most current information, install the documentation
updates as they become available, or refer to the DB2 documentation in IBM
Knowledge Center.
You can access additional DB2 technical information such as technotes, white
papers, and IBM Redbooks®
publications online at ibm.com. Access the DB2
Information Management software library site at http://www.ibm.com/software/
data/sw-library/.
Documentation feedback
The DB2 Information Development team values your feedback on the DB2
documentation. If you have suggestions for how to improve the DB2
documentation, send an email to db2docs@ca.ibm.com. The DB2 Information
Development team reads all of your feedback but cannot respond to you directly.
Provide specific examples wherever possible to better understand your concerns. If
you are providing feedback on a specific topic or help file, include the topic title
and URL.
Do not use the db2docs@ca.ibm.com email address to contact DB2 Customer
Support. If you have a DB2 technical issue that you cannot resolve by using the
documentation, contact your local IBM service center for assistance.

DB2 technical library in hardcopy or PDF format
You can download the DB2 technical library in PDF format or you can order in
hardcopy from the IBM Publications Center.
English and translated DB2 Version 10.5 manuals in PDF format can be
downloaded from DB2 database product documentation at www.ibm.com/
support/docview.wss?rs=71&uid=swg27009474.
The following tables describe the DB2 library available from the IBM Publications
Center at http://www.ibm.com/e-business/linkweb/publications/servlet/pbi.wss.
Although the tables identify books that are available in print, the books might not
be available in your country or region.
The form number increases each time that a manual is updated. Ensure that you
are reading the most recent version of the manuals, as listed in the following
tables.
The DB2 documentation online in IBM Knowledge Center is updated more
frequently than either the PDF or the hardcopy books.
Table 4. DB2 technical information
Name Form number Available in print Availability date
Administrative API
Reference
SC27-5506-00 Yes 28 July 2013
Administrative Routines
and Views
SC27-5507-01 No 1 October 2014
Call Level Interface
Guide and Reference
Volume 1
SC27-5511-01 Yes 1 October 2014
Call Level Interface
Guide and Reference
Volume 2
SC27-5512-01 No 1 October 2014
Command Reference SC27-5508-01 No 1 October 2014
Database Administration
Concepts and
Configuration Reference
SC27-4546-01 Yes 1 October 2014
Data Movement Utilities
Guide and Reference
SC27-5528-01 Yes 1 October 2014
Database Monitoring
Guide and Reference
SC27-4547-01 Yes 1 October 2014
Data Recovery and High
Availability Guide and
Reference
SC27-5529-01 No 1 October 2014
Database Security Guide SC27-5530-01 No 1 October 2014
DB2 Workload
Management Guide and
Reference
SC27-5520-01 No 1 October 2014
Developing ADO.NET
and OLE DB
Applications
SC27-4549-01 Yes 1 October 2014
Developing Embedded
SQL Applications
SC27-4550-00 Yes 28 July 2013

Table 4. DB2 technical information (continued)
Developing Java
Applications
SC27-5503-01 No 1 October 2014
Developing Perl, PHP,
Python, and Ruby on
Rails Applications
SC27-5504-01 No 1 October 2014
Developing RDF
Applications for IBM
Data Servers
SC27-5505-00 Yes 28 July 2013
Developing User-defined
Routines (SQL and
External)
SC27-5501-00 Yes 28 July 2013
Getting Started with
Database Application
Development
GI13-2084-01 Yes 1 October 2014
Getting Started with
DB2 Installation and
Administration on Linux
and Windows
GI13-2085-01 Yes 1 October 2014
Globalization Guide SC27-5531-00 No 28 July 2013
Installing DB2 Servers GC27-5514-01 No 1 October 2014
Installing IBM Data
Server Clients
GC27-5515-01 No 1 October 2014
Message Reference
Volume 1
SC27-5523-00 No 28 July 2013
Message Reference
Volume 2
SC27-5524-00 No 28 July 2013
Net Search Extender
Administration and
User's Guide
SC27-5526-01 No 1 October 2014
Partitioning and
Clustering Guide
SC27-5532-01 No 1 October 2014
pureXML Guide SC27-5521-00 No 28 July 2013
Spatial Extender User's
Guide and Reference
SC27-5525-00 No 28 July 2013
SQL Procedural
Languages: Application
Enablement and Support
SC27-5502-00 No 28 July 2013
SQL Reference Volume 1 SC27-5509-01 No 1 October 2014
SQL Reference Volume 2 SC27-5510-01 No 1 October 2014
Text Search Guide SC27-5527-01 Yes 1 October 2014
Troubleshooting and
Tuning Database
Performance
SC27-4548-01 Yes 1 October 2014
Upgrading to DB2
Version 10.5
SC27-5513-01 Yes 1 October 2014
What's New for DB2
Version 10.5
SC27-5519-01 Yes 1 October 2014
XQuery Reference SC27-5522-01 No 1 October 2014

Table 5. DB2 Connect technical information
Installing and
Configuring DB2
Connect Servers
SC27-5517-00 Yes 28 July 2013
DB2 Connect User's
Guide
SC27-5518-01 Yes 1 October 2014
Displaying SQL state help from the command line processor
DB2 products return an SQLSTATE value for conditions that can be the result of an
SQL statement. SQLSTATE help explains the meanings of SQL states and SQL state
class codes.
Procedure
To start SQL state help, open the command line processor and enter:
? sqlstate or ? class code
where sqlstate represents a valid five-digit SQL state and class code represents the
first two digits of the SQL state.
For example, ? 08003 displays help for the 08003 SQL state, and ? 08 displays help
for the 08 class code.
Accessing DB2 documentation online for different DB2 versions
You can access online the documentation for all the versions of DB2 products in
IBM Knowledge Center.
About this task
All the DB2 documentation by version is available in IBM Knowledge Center at
http://www.ibm.com/support/knowledgecenter/SSEPGG/welcome. However,
you can access a specific version by using the associated URL for that version.
Procedure
To access online the DB2 documentation for a specific DB2 version:
v To access the DB2 Version 10.5 documentation, follow this URL:
http://www.ibm.com/support/knowledgecenter/SSEPGG_10.5.0/
com.ibm.db2.luw.kc.doc/welcome.html.

Terms and conditions
Permissions for the use of these publications are granted subject to the following
terms and conditions.
Applicability: These terms and conditions are in addition to any terms of use for
the IBM website.
Personal use: You may reproduce these publications for your personal,
noncommercial use provided that all proprietary notices are preserved. You may
not distribute, display or make derivative work of these publications, or any
portion thereof, without the express consent of IBM.
Commercial use: You may reproduce, distribute and display these publications
solely within your enterprise provided that all proprietary notices are preserved.
You may not make derivative works of these publications, or reproduce, distribute
or display these publications or any portion thereof outside your enterprise,
without the express consent of IBM.
Rights: Except as expressly granted in this permission, no other permissions,
licenses or rights are granted, either express or implied, to the publications or any
information, data, software or other intellectual property contained therein.
IBM reserves the right to withdraw the permissions granted herein whenever, in its
discretion, the use of the publications is detrimental to its interest or, as
determined by IBM, the previous instructions are not being properly followed.
You may not download, export or re-export this information except in full
compliance with all applicable laws and regulations, including all United States
export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE
PUBLICATIONS. THE PUBLICATIONS ARE PROVIDED "AS-IS" AND WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.
IBM Trademarks: IBM, the IBM logo, and ibm.com®
are trademarks or registered
trademarks of International Business Machines Corp., registered in many
jurisdictions worldwide. Other product and service names might be trademarks of
IBM or other companies. A current list of IBM trademarks is available on the Web
at www.ibm.com/legal/copytrade.shtml

Appendix C. Notices
This information was developed for products and services offered in the U.S.A.
Information about non-IBM products is based on information available at the time
of first publication of this document and is subject to change.
IBM may not offer the products, services, or features discussed in this document in
other countries. Consult your local IBM representative for information about the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user's responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not grant you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
For license inquiries regarding double-byte character set (DBCS) information,
contact the IBM Intellectual Property Department in your country or send
inquiries, in writing, to:
Intellectual Property Licensing
Legal and Intellectual Property Law
IBM Japan, Ltd.
19-21, Nihonbashi-Hakozakicho, Chuo-ku
Tokyo 103-8510, Japan
The following paragraph does not apply to the United Kingdom or any other
country/region where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements,
changes, or both in the product(s) and/or the program(s) described in this
publication at any time without notice.
Any references in this information to websites not owned by IBM are provided for
convenience only and do not in any manner serve as an endorsement of those

websites. The materials at those websites are not part of the materials for this IBM
product and use of those websites is at your own risk.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose
of enabling: (i) the exchange of information between independently created
programs and other programs (including this one) and (ii) the mutual use of the
information that has been exchanged, should contact:
IBM Canada Limited
U59/3600
3600 Steeles Avenue East
Markham, Ontario L3R 9Z7
CANADA
Such information may be available, subject to appropriate terms and conditions,
including, in some cases, payment of a fee.
The licensed program described in this document and all licensed material
available for it are provided by IBM under terms of the IBM Customer Agreement,
IBM International Program License Agreement, or any equivalent agreement
between us.
Any performance data contained herein was determined in a controlled
environment. Therefore, the results obtained in other operating environments may
vary significantly. Some measurements may have been made on development-level
systems, and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Information concerning non-IBM products was obtained from the suppliers of
those products, their published announcements, or other publicly available sources.
IBM has not tested those products and cannot confirm the accuracy of
performance, compatibility, or any other claims related to non-IBM products.
Questions on the capabilities of non-IBM products should be addressed to the
suppliers of those products.
All statements regarding IBM's future direction or intent are subject to change or
withdrawal without notice, and represent goals and objectives only.
This information may contain examples of data and reports used in daily business
operations. To illustrate them as completely as possible, the examples include the
names of individuals, companies, brands, and products. All of these names are
fictitious, and any similarity to the names and addresses used by an actual
business enterprise is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which
illustrate programming techniques on various operating platforms. You may copy,
modify, and distribute these sample programs in any form without payment to
IBM, for the purposes of developing, using, marketing or distributing application
programs conforming to the application programming interface for the operating

platform for which the sample programs are written. These examples have not
been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or
imply reliability, serviceability, or function of these programs. The sample
programs are provided "AS IS", without warranty of any kind. IBM shall not be
liable for any damages arising out of your use of the sample programs.
Each copy or any portion of these sample programs or any derivative work must
include a copyright notice as follows:
© (your company name) (year). Portions of this code are derived from IBM Corp.
Sample Programs. © Copyright IBM Corp. _enter the year or years_. All rights
reserved.
Trademarks
IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of
International Business Machines Corp., registered in many jurisdictions worldwide.
Other product and service names might be trademarks of IBM or other companies.
A current list of IBM trademarks is available on the web at “Copyright and
trademark information” at www.ibm.com/legal/copytrade.shtml.
The following terms are trademarks or registered trademarks of other companies
v Linux is a registered trademark of Linus Torvalds in the United States, other
countries, or both.
v Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Oracle, its affiliates, or both.
v UNIX is a registered trademark of The Open Group in the United States and
other countries.
v Intel, Intel logo, Intel Inside, Intel Inside logo, Celeron, Intel SpeedStep, Itanium,
and Pentium are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
v Microsoft, Windows, Windows NT, and the Windows logo are trademarks of
Microsoft Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Appendix C. Notices 67

Index
C
client-to-server communications
connections
configuring 17
clients
server combinations 5
command line processor plus (CLPPlus)
overview 4
commands
db2dsdcfgfill 25
db2setup
installing data server clients 51
communication protocols
overview 19
configuration files
db2dsdriver.cfg 21
create configuration file command 25
D
data server driver keywords 21
DB2 documentation
available formats 59
DB2 documentation versions
IBM Knowledge Center 62
DB2 products
general information 57
packaging 57
db2dsdcfgfill command
details 25
db2dsdriver.cfg file
details 21
disk space
requirements 9
documentation
PDF files 60
printed 60
terms and conditions of use 63
H
help
SQL statements 62
I
IBM Data Server Client
installing
Windows 47
overview 45
IBM data server clients
installing
Linux 51
UNIX 51
Windows 11, 47
types 3
user accounts 47
IBM Data Server Driver Package
installing
Linux 10, 13
setup command options 11
UNIX 10, 13
Windows 9, 11, 47
overview 3
restrictions 9, 10
validating installation
ADO.NET 30
CLPPlus 27
DSN alias 27
using CLI 27
IBM data server drivers
types 3
IBM Data Server Runtime Client
installing
Windows 47
IBM Knowledge Center
DB2 documentation versions 62
L
Linux
installing
IBM data server clients 51
IBM Data Server Driver Package 13
M
mainframe databases
connecting 4
memory
requirements
merge modules
IBM Data Server Driver Package instance 35
midrange databases
connecting to 4
N
notices 65
O
online DB2 documentation
IBM Knowledge Center 62
S
servers
client combinations 5
SQL statements
help
displaying 62

T
TCP/IP
terms and conditions
publications 63
U
uninstallation
IBM Data Server Driver Package
Linux 41
UNIX 41
Windows 39
UNIX
installing
user accounts
W
Windows
installing
IBM data server clients 11, 47
IBM Data Server Driver Package 11, 47

Spineinformation:
IBMDB210.5forLinux,UNIX,andWindowsInstallingIBMDataServerClients

Ibm db2 10.5 for linux, unix, and windows installing ibm data server clients

Recommended

More Related Content

What's hot (15)

Similar to Ibm db2 10.5 for linux, unix, and windows installing ibm data server clients (20)

More from bupbechanhgmail (19)

Recently uploaded (20)

Ibm db2 10.5 for linux, unix, and windows installing ibm data server clients