IRJET- Study on Hierarchical Cluster-Based Energy-Efficient Routing in Wireless Sensor Networks

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 688
Study on hierarchical cluster-based energy-efficient routing in
Wireless Sensor Networks
Indranil Ghosh
B.Tech Student, Department of Computer Science and Engineering, KIIT University, Bhubaneswar, Odisha, India
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - The current technical developments in
communication and computation has overall led to a
development of low-cost, low-power, small in size,
multifunctional nodes in wireless sensor networks. As radio
broadcast and reception consumes lot of energy so one of the
important problems of wireless sensor network comprises
inadequate battery power and short life span. In order to
maximize the complete network performance, it is preferable
to dispense energy all over the network. Much research has
been done in the recent years, examining differentfeatureslike
low power protocols, routing protocols, network coverage
problems and network formations. There are various routing
protocols like location-aided, multi-path, data-centric, QoS
based, hierarchical routing, hybrid routing etc. which are
aimed to achieve ideal routing in the context of energy. In this
paper, the prime focus is mainly over the study on the energy-
efficient hierarchical cluster-based routing for WSN.
Key Words: Wireless Sensor Networks, Cluster Head,
Hierarchical clustering, Base Station, PEGASIS, TEEN
1. INTRODUCTION
With fast development in electronics industry, small cheap
battery-powered wirelesssensorshave nowstartedtomake
an influence on the communication with the physical world.
With the starting of micro-electronic mechanical systems
(MEMS)[8] and wireless communication technologies have
allowed the development of tiny, low-cost, low-power, and
multifunctional smart sensor nodes in a wireless sensor
network (WSN). These sensor nodes are positioned over a
wide area using a drone which are networked with wireless
connections. The wireless nodes were initially used first by
the military organisations for frontline surveillance [2].
A WSN generally comprisesof vast number of nodes(tensto
thousands) which are either mobile or static.Thesearesmall
devices which are implanted with microprocessors, radio
receivers and different components for computing,
communication and actuation. Any sensor node of that
property can be power-driven by a AA battery and can
continue for three years without failure with a 1% low duty
cycle mode.
However, these sensor nodes are very disposed to failures,
for that reason they are densely installed in large numbers
over a fixed area.
Figure 1 showsa diagram of a wireless sensornetwork.After
they are deployed, these nodes are accountable for self-
organizing in a suitable network architecture using several
network algorithms. Position can bepreciselyobtainedusing
global positioning systems (GPS) or positioning algorithms.
The information can be collected from all nodes across the
network and they are transported to the base station.
Fig -1: Schematic of a Wireless Sensor Network
Architecture
In an ideal case we can originate information from WSN by
giving queriesand gathering results from base stations(also
called sink nodes) which acts as an interface between users
and network. Hence, WSN is a distributed database.
The elementary goal of a WSN is to provideinformationfrom
raw sensed data by individual sensor node. The resource-
controlled nature of sensor nodes poses a great challenge to
the design of WSN. On the other hand, inadequate power
dictates, the design of energy-efficient communication
protocol.
Routing is also a very challenging job asthe nodescan either
be mobile or stationary which distinguishes it from mobile
ad-hoc networks 0. The sensor nodes have limits over
processing ability, transmission power, storage and on-
board energy and thus require careful resource
management. Researchers have found several protocols [4]
for communication, security and routing correct data to the
base station in WSN. All these protocolscan bedividedinto4
categories as shown in Table 1.

Table -1: Different Routing Protocols
In this paper several hierarchical cluster-based routing
protocols for wireless sensor network are discussed and
compared. This paper is ordered into 3 sections. Insection2,
energy-efficient structures are discussed and in section 3,
various hierarchical cluster-based routing protocols are
discussed and compared.
2. ENERGY EFFICIENTCLUSTERINGSTRUCTURESIN
WSN
The main reason of clustering is to minimize the entire
transmission power over the nodes in a specified path, and
to sustain a balance of load among the nodes for extending
the network lifetime. Clustering is a sample of layered
protocols in which a network is made of several clusters of
sensors. As in Figure 2, each cluster is managed by a special
node called cluster head (CH), which acts a leader node and
is accountable for organizing the data transmissionactivities
of all sensors in its region. All sensors in a cluster
communicate with a cluster head for performing intra-
transmission arrangement and data aggregation. Cluster
heads in turn transmits the sensed data to the global sink.
The distance between the sensor to their cluster head is
much lesser than their respective distances to global sink.
Since a network is characterized by its inadequate wireless
channel bandwidth, it would be useful if the amount of data
transmitted to the sink can be reduced. To achieve this
objective, a local collaboration between the sensors in a
cluster is required to reduce bandwidth.
Fig -2: Clustering in WSN
2.1 Cluster-based Hierarchical Model
As shown in Figure 3, the hierarchical splits the entire
network into layers of clusters or hierarchies [5]. Nodes are
categorised into clusters which again forms bigger clusters
leading to tree-like structures. Data travels from the lowest
clustered layer to highest layer. Clustering thus offers
integral optimization abilities at the CHs. In the cluster-
based hierarchical model, data is first combined and
analysed in the cluster then sent to the higher-level cluster-
head. As it moves upwards from lower to higher level, it
covers greater distances, which in turn decreases the travel
time and latency. This model is better than any single-hopor
multi-hop models.
Fig -3: Cluster Based Hierarchical Model
A cluster-based hierarchy is very efficient as data moves
faster to base station from the cluster heads thus decreasing
latency than in a multi-hop model. Also, in cluster-based
model only cluster-heads are responsible for data
aggregation but in the multi-hop model every intermediate
node performs data aggregation. As a result, the cluster-
based model is more suitable for real-time applicationsthan
the multi-hop model. However, it has a majorproblem,i.e.,as
the distance between clustering level increases, the energy
spent is proportionate to the square of the distance. This
increases energy expenditure. Regardless of this pitfall, this
technique overshadows its disadvantage. A cluster-based
hierarchical model provides a better method to routing for
WSNs.

3. ENERGY-EFFICIENT HIERARCHICAL CLUSTER
ROUTING TECHNIQUES
As discussed in [8], these techniques maximise the time
periodof a networkwith a huge numberof sensornodes.The
EEHC technique splits the entire WSN into clumps where
each clumphas a clusterhead andthe clusters areintheform
of a hierarchy. The CH gather the data from the adjacent
nodes and transfers it to the CHs of upper hierarchical levels
which eventually reaches the global sink or base station.
Numerous research projects in the past few years have
explored hierarchical clustering in WSN from different
perceptions. Various protocols have been proposed for
extending the life of WSN and for routing the exact data to
the base station. Some of them are LEACH, PEGASIS and
TEEN.
3.1 Low-Energy Adaptive Clustering Hierarchy
(LEACH)
[3] LEACH is the initial and the most powerful EEHC
technique for WSNs which was proposed for dropping
power consumption. In LEACH, based on time-interval the
nodes alternately perform the clustering. Each cluster head
(CH) directly communicate to relay the data to the base
station. It is an application-specificdatadistributionprotocol
that uses clusters to extend the life of the wireless sensor
network LEACH is based on an aggregation technique that
combines the original data into a smaller size meaningful
data to all individual sensors. LEACH splits the whole
network into several clusters of sensors, which are built by
using localized coordination and controlnotonlytodecrease
the amount of data that are transmitted to the sink, but also
to make routing and data distributionmoreavailable.Energy
dissipation of the sensor depends on the distance and the
data size to be transmitted. Hence, LEACH tries to transmit
data over short distances and reduce the number of
transmission and reception activities.LEACHusessingle-hop
routing where each node transmits directly to the cluster-
head and the sink. Therefore, it is not valid for networks
which are deployed in large areas. Also, LEACH clustering
terminates in a finite number of loops, but does not
guarantee good Cluster Head distribution.
3.2 Power-Efficient Gathering in Sensor
Information Systems (PEGASIS)
[7] PEGASIS can be called as a superset of LEACH protocol.It
forms multiple clusters and creates chains from sensor
nodes so that each node transmits and receives from a
neighbouring node and only one node is selected from that
chain to transmit to the base station. After the data is
collected and aggregated it moves from node to node and is
finally delivered to the base station. The chain creation is
performed using greedy approach. Unlike LEACH, PEGASIS
does use form cluster. However, it uses only one node in a
chain to transmit data to the base station instead of using
various nodes. A sensor transmits data to its adjacent nodes
in the data fusion phase without sending straightto itsCHas
in the case of LEACH. In PEGASIS routing technique, the
construction stage assumes that all the sensors have
information about all other nodes, mainly, the positions of
the sensors, and uses a greedy approach to calculate nodal
positions. Precisely, it begins with the farthest sensor from
sink to make sure that sensors which are very far apart from
the sink have adjacent nodes. If any sensor dies due to low
battery, the chain is formed using the greedy approach by
sidestepping the eliminated sensor. In each round, an
arbitrarily sensor node from the chain is chosen which
transmits the aggregated data to the BS, hence reducing the
per round energy expenditure ascompared to LEACH. Thus,
PEGASIS is an ideal chain-based protocol.
3.3 THRESHOLD SENSITIVE ENERGY EFFICIENT
SENSOR NETWORK PROTOCOL (TEEN)
[6] TEEN is a hierarchical clustering protocol, which groups
sensors into clumps each having a CH. All the sensors
forming a transfer their sensed data to the CH. The CH then
sends the collective form data to higher level CH till the data
reaches to the BS. Thus, the sensor network architecture in
TEEN is based on a series of hierarchies where closer nodes
make a cluster and this procedure goes on till the BS is
reached. TEEN is fit for applications where the users can
control a trade-off among energy efficiency, data accuracy,
and response time.
Salient featuresof TEEN comprise of its correctness for time
critical sensing applications. Also, since message
transmission uses additional energy than data sensing, so
the energy consumption in this system is less than the
proactive networks. The soft threshold can be varied. At
every cluster change time, new parameters are broadcasted
and so, the user can change them asneeded. However, TEEN
is not apt for sensing applications whereperiodicreportsare
needed since the user may not get any data at all if the
thresholds are untouched.
4. CONCLUSIONS
Due to the scarce energy resources of sensors, energy
efficiency is one of the key challenges in the design of
protocols for WSNs. The ultimate objective behind the
protocol design is to keep the sensors operating prolonged
time, therefore extending the network lifetime. In this paper
we have studied and summarized current research works
focused primarily on the energy efficient hierarchical
cluster-based routing protocols for WSNs. As this is a
comprehensivearea, this paper hasonlycoveredfewrouting
protocols. The protocols discussed in this paper have
individual advantages and drawbacks. Based on the
topology, the protocol and routing strategiescan be applied.
The factors affecting cluster formation and CH
communication are open topics for future research.

Moreover, the processof data aggregation and fusionamong
clusters is also an fascinating problem to explore.
REFERENCES
[1] Akkaya, K., & Younis, M. (2005). A Survey on Routing
protocols for Wireless Sensor Networks. Elsevier, 325-
349.
[2] Chong, C., & Kumar, S. (2003). Sensor Networks :
Evolution oppurtunities, and Challenges. IEEE, vol 91,
no. 8, 1247-1256.
[3] Heinzelman, W., Chandrakasan, A., & Balakrishnan, H.
(2000). Energy-efficient Communication Protocol for
Wireless Microsensor Networks. Thirty Third Hawaii
International Conference on System Sciences.
Washington, DC: IEEE.
[4] Heinzelman, W., Chandrakasan, A., & Balakrishnan, H.
(2002). An Application-Specific Protocol Architecture
for Wireless Microsensor Networks. IEEE Tmnsactions
on Wireless Communications, 660-670.
[5] Ibriq, J., & Mahgoub, I. (2004). Cluster-Based Routingin
Wireless Sensor Networks: Issues and Challenges.
SPECTS 2004, 759-766.
[6] Manjeshwar, A., & Agrawal, D. (2001). TEEN:AProtocol
for Enhanced Efficiency in Wireless Sensor Networks.
1st International Workshop on Parallel and Distributed
Computing Issues in Wireless Networks and Mobile
Computing. San Francisco.
[7] Yueyang, L., Hong, J., & Guangxin, Y. (2006). An Energy-
Efficient PEGASIS-Based Enhanced Algorithm in
Wireless Sensor Networks. China Communications.
[8] Zheng, J., & Jamalipour, A. (2009). Wireless Sensor
Networks: A Networking Perspective. IEEE.

IRJET- Study on Hierarchical Cluster-Based Energy-Efficient Routing in Wireless Sensor Networks

More Related Content

What's hot (18)

Similar to IRJET- Study on Hierarchical Cluster-Based Energy-Efficient Routing in Wireless Sensor Networks (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- Study on Hierarchical Cluster-Based Energy-Efficient Routing in Wireless Sensor Networks