SOURCE CODE ANALYSIS TO REMOVE SECURITY VULNERABILITIES IN JAVA SOCKET PROGRAMS: A CASE STUDY

International Journal of Network Security & Its Applications (IJNSA), Vol.5, No.1, January 2013
DOI : 10.5121/ijnsa.2013.5101 1
SOURCE CODE ANALYSIS TO REMOVE SECURITY
VULNERABILITIES IN JAVA SOCKET PROGRAMS: A
CASE STUDY
Natarajan Meghanathan
Jackson State University, 1400 Lynch St, Jackson, MS, USA
natarajan.meghanathan@jsums.edu
ABSTRACT
This paper presents the source code analysis of a file reader server socket program (connection-oriented
sockets) developed in Java, to illustrate the identification, impact analysis and solutions to remove five
important software security vulnerabilities, which if left unattended could severely impact the server
running the software and also the network hosting the server. The five vulnerabilities we study in this
paper are: (1) Resource Injection, (2) Path Manipulation, (3) System Information Leak, (4) Denial of
Service and (5) Unreleased Resource vulnerabilities. We analyze the reason why each of these
vulnerabilities occur in the file reader server socket program, discuss the impact of leaving them
unattended in the program, and propose solutions to remove each of these vulnerabilities from the
program. We also analyze any potential performance tradeoffs (such as increase in code size and loss of
features) that could arise while incorporating the proposed solutions on the server program. The
proposed solutions are very generic in nature, and can be suitably modified to correct any such
vulnerabilities in software developed in any other programming language. We use the Fortify Source
Code Analyzer to conduct the source code analysis of the file reader server program, implemented on a
Windows XP virtual machine with the standard J2SE v.7 development kit.
KEYWORDS
Software vulnerabilities, Source code analysis, Resource Injection, Path manipulation, System
information leak, Denial of service, Unreleased resource, Network security
1. INTRODUCTION
With the phenomenal growth of the Internet, it is imperative to test for the security of software
during its developmental lifecycle and fix the vulnerabilities, if any is found, before
deployment. Until recently, security has been often considered as an afterthought, and the bugs
are mostly detected post-deployment through user experiences and attacks reported. The bugs
are often controlled through patch code (more formally called ‘security updates’) that is quite
often sent to customers via Internet. Sometimes, patch codes developed to fix one bug may
often open several new vulnerabilities, which if left unattended, can pose a significant risk for
the system (and its associated resources) on which the software is run. It is critical that software
be built-in with security features (starting from the requirement analysis stage itself, and
implemented with appropriate modules as well as tested with suitable analysis techniques)
during its entire development lifecycle.
In this paper, we focus on testing for software security using source code analysis (also
invariably referred to as static code analysis). Static code analysis refers to examining a piece of
code without actually executing it [1]. The technique of evaluating software during its execution
is referred to as run-time code analysis (also called dynamic code analysis) [2] – the other
commonly used approach to test for software security. While dynamic code analysis is mainly

2
used to test for logical errors and stress test the software by running it in an environment with
limited resources, static or source code analysis has been the principal means to evaluate the
software with respect to functional, semantic and structural issues including, but not limited to,
type checking, style checking, program verification, property checking and bug finding [3]. On
the top of these issues, the use of static code analysis to analyze the security aspects of software
is gaining prominence. Static code analysis helps to identify the potential threats
(vulnerabilities) associated with the software, analyze the complexity involved (in terms of
increase in code size, development time, and code run time, etc) and the impact on user
experiences in fixing these vulnerabilities through appropriate security controls [4]. Static code
analysis also facilitates evaluating the risks involved in only mitigating or just leaving these
vulnerabilities unattended – thus, leading to an attack, the consequences of such attacks and the
cost of developing security controls and integrating them to the software after the attack has
occurred [5]. In addition, static code analysis is also used to analyze the impact of the design
and the use of the underlying platform and technologies on the security of the software [6]. For
example, programs developed in C/Unix platforms may have buffer overflow vulnerabilities,
which are very critical to be identified and mitigated; whereas, buffer overflow vulnerabilities
are not an issue for software developed in Java. Software developed for J2EE platforms are
strictly forbidden from using a main function as the starting point of a program, whereas the
main function is traditionally considered the starting point of execution of software programs
developed in standard J2SE development kits and other high-level programming languages. It
would be very time consuming and often ineffective to manually conduct static code analysis on
software and analyze the above issues as well as answer pertinent questions related to the
security of software. One also needs to have a comprehensive knowledge of possible exploits
and their solutions to manually conduct static code analysis.
Figure 1: Command-line Execution of the Source Code Analyzer on a Java Program and
Forwarding the Results to an Audit Workbench Format File

3
Various automated tools have been recently developed to conduct static code analysis [7][8]. In
this paper, we illustrate the use of a very effective tool developed by Fortify Inc., called the
Source Code Analyzer (SCA) [9]. The Fortify SCA can be used to conduct static code analysis
on C/C++ or Java code and can be run in Windows, Linux or Mac platforms. The SCA can
analyze individual program files or entire projects collectively. The analyzer uses criteria that
are embedded into a generic rulepack (a set of rules) to analyze programs developed in a
specific platform/ language. Users may use these generic rulepacks that come with the SCA or
develop their own customized sets of rules.
Figure 2: Audit Workbench Audit Guide Figure 3: Listing of all the Issues identified
Figure 4: Audit Workbench: Issues Panel and Code Editor displaying Details of a Specific
Security Issue
The SCA has to be first used in command line (Figure 1) to generate a report, in .fpr format (as
shown in the first command executed in Figure 1), which can be loaded (second command in

4
Figure 1) into the Audit Workbench utility (screenshot shown in Figure 2), a graphical-user
interface utility, included with the Fortify suite of tools. The Workbench interface displays a list
of the issues that have been flagged and groups these issues according to their severity (hot,
warning, or info). Figure 3 shows a listing of all the issues identified with the file reader server
socket program of the case study presented in Section 2. The Workbench includes an editor that
can highlight the troublesome code identified to be the source of a particular vulnerability listed
in the Issues panel, and also allows users to make changes to the code within the application.
Figure 4 shows a comprehensive picture of the Issues panel with the code editor. One
significant use of the Workbench utility is that for each generic issue flagged by the analyzer,
the utility provides a description of the problem and how it may be averted. If users think that a
security issue raised by the analyzer is of no interest to them (i.e. can be left unattended in the
code), then the Workbench utility can be set to suppress the raising of the issue in subsequent
instantiations of running the analyzer. At any point of time, the suppressed issues can be
unchecked and the issues will be raised if found in the code being analyzed at that time. Note
that it is important to make sure the source code that is being analyzed compiles without any
error prior to running it with the SCA.
Figure 5: Case Study: Original Java Source Code for the File Reader Server Program
2. CASE STUDY ON A CONNECTION-ORIENTED FILE READER SERVER
SOCKET PROGRAM IN JAVA
In this section, we present a case study on a file reader server socket program, based on
connection-oriented sockets. For simplicity, the server program is considered to serve only one
client. The file reader server basically lets a client to read the contents of a file whose name or
the path is sent by the client over a socket and the file is locally stored at the server. The server
program (whose original source code is shown in Figure 5) works as follows: An object of class
ServerSocket is instantiated at a port number input by the user. The ServerSocket is the class
used to open server sockets that wait on a certain port number (publicly known to the clients)
for incoming client requests. Once a client contacts the server, the ServerSocket is unblocked
(through the accept( ) method) and a Socket object (in our program the clientSocket object) is

5
created as a reference to communicate with the client at the other side. The server waits for the
client to send a filename or a pathname through the socket and reads it through a
BufferedReader object (brSocket). Since the server is not sure of the number of characters that
would constitute the filename or the pathname, the server uses the readLine( ) method of the
BufferedReader class to read the filename/pathname as a line of characters stored as a String.
This String object is directly passed to the FileReader constructor to load the file the client
wishes to read. The contents of the file are read line-by-line and sent to the client using an
object of the PrintStream class invoked on the ClientSocket object (of class Socket).
We conduct source code analysis of the file reader server socket program (shown in Figure 5)
using the Fortify SCA and the output of all the issues identified are shown in Figure 3. Note that
the poor logging practice warning shown in Figure 3 is due to the use of print statements. We
do not bother to remove the print statements and so neglect those warnings. Similarly, we
discard the warning message appearing related to J2EE Bad Practices: Sockets; J2EE standard
considers socket-based communication in web applications as prone to error, and permits the
use of sockets only for the purpose of communication with legacy systems when no higher-level
protocol is available. The Fortify Source Code Analyzer subscribes to the J2EE standards and
flags some of the commonly used J2SE features like sockets as something that is vulnerable in
the context of security. As mentioned before, the Audit Workbench does provide the flexibility
to turn off these flags which do not appear relevant to the programming environment. The goal
of the case study is thus to modify the file reader server socket program (and still does what it is
intended to do) to the extent that the source code analyzer only outputs warnings corresponding
to the poor logging practice and the use of sockets as bad practice, and all the other
vulnerabilities and warnings associated with the program are taken care of (i.e., removed).
2.1. Resource Injection Vulnerability
The Resource Injection vulnerability (a dataflow issue) arises because of the functionality to let
the user (typically the administrator) starting the server program to open the server socket on
any port number of his choice. The vulnerability allows user input to control resource identifiers
enabling an attacker to access or modify otherwise protected system resources [1]. In the
connection server socket program of Figure 5, a Resource Injection vulnerability exist in line
11, wherein the program opens a socket on the port number whose value is directly input by the
user. If the server program has privileges to open the socket at any specified port number and
the attacker does not have such a privilege on his own, the Resource Injection vulnerability
allows an attacker to gain capability to open a socket at the port number of his choice that would
not otherwise be permitted. This way, the program could even give the attacker the ability to
transmit sensitive information to a third-party server.
We present two solution approaches to completely avoid or at least mitigate the Resource
Injection vulnerability: (1) Use a blacklist or white list: Blacklisting selectively rejects
potentially dangerous characters before further processing the input in a program. However, any
such list of unsafe characters is likely to be incomplete and will almost certainly become out of
date with time. A white list of allowable characters may be a better strategy because it allows
only those inputs whose characters are exclusively listed in the approved set. Due to the
difficulty in coming up with a complete list of allowable or non-allowable characters, the
approaches of using a blacklist or white list can only mitigate the Resource Injection attack.
Nevertheless, if the set of legitimate resource names is too large or too hard to keep track of, it
may be more practical to follow a blacklist or white list approach. We will use this approach to
remove the Path Manipulation vulnerability in Section 2.2. (2) Use a level of indirection: This
approach involves creating a list of legitimate resource names that a user is allowed to specify,
and only allow the user to select from the list. This approach can help us to completely avoid
having Resource Injection vulnerability in the code, because a user cannot directly specify the

6
resource name of his choice and can only chose from what is presented to him. The tradeoff is
with the approach of providing a list of port numbers (the resources in our case) to choose from,
we are revealing the available port numbers to a user (even though he is constrained only to
choose from this list). Note that with the blacklist or white list approach, the user has to merely
enter an input of his choice and the program internally processes the input and filters it (thus not
revealing information regarding acceptable inputs to the user).
Figure 6: Modification to the File Reader Server Program to Remove the Resource Injection
Vulnerability (fileReaderServer_1.java)
Figure 7: Results of the Source Code Analysis of the File Reader Server Program after the
Removal of the Resource Injection Vulnerability (fileReaderServer_1.java)

7
In this section, we present the use of the second approach (i.e. using a level of indirection) to
remove the Resource Injection vulnerability (refer to the modified code, especially lines 9
through 25 and 54-56, in Figure 6). The user starting the server program is presented with a list
of port numbers to choose from. Each valid port number is presented with a serial number and
the user has to choose one among these serial numbers. If the user choice falls outside the valid
range of these serial numbers, then the server program terminates printing a simple error
message. The limitation is that the user no longer has the liberty to open the server socket at a
port number of his choice. This is quite acceptable because often the server sockets are run on
specific well-defined port numbers (like HTTP on 80, FTP on 21, etc) and not on arbitrary port
numbers, even if the administrator wishes to run the server program on a port number of his
choice. Figure 7 presents the results of the source code analysis on the modified connection
server socket program (fileReaderServer_1.java) to fix the Resource Injection vulnerability. We
have also removed the use of command-line arguments to get inputs and instead use the Scanner
class; thus, taking care of the Leftover debug code warning.
2.2. Path Manipulation Vulnerability
The Path Manipulation vulnerability occurs when user input is directly embedded to the
program statements thereby allowing the user to directly control paths employed in file system
operations [10]. In our file reader server program, the name or path for the file sent by the client
through the socket is received as a String object at the server side, and directly passed onto the
FileReader constructor (line 20 in Figure 5). The practice of directly embedding a file name or a
path for the file name in the program to access the system resources could be cleverly exploited
by a malicious user who may pass an unexpected value for the argument and the consequences
of executing the program, especially if it runs with elevated privileges, with that argument may
turn out to be fatal. Thus, Path Manipulation vulnerability is a very serious issue and should be
definitely not left unattended in a code. Such a vulnerability may enable an attacker to access or
modify otherwise protected system resources.
Figure 8: Java Code Snippet for the Sanitize Method to Validate the Filename Received
through Socket
As suggested in Section 2.1, we propose to use the approach of filtering user inputs using the
blacklist/white list approach. It would not be rather advisable to present the list of file names to
the client at the remote side – because this would reveal unnecessary system information to a
remote user. It would be rather more prudent to let the client to send the name or the path for the
file he wants to open, and we validate the input against a set of allowable and non-allowable
characters. In this paper, we assume the file requested to be read is located in the same directory
from which the server program is run, and that the file is a text file. Hence, the last four
characters of the input received through the socket should be “.txt” and nothing else (thus, .txt at
the end of the String input constitutes a white list). Also, since the user is not permitted to read a
file that is in a directory other than the one in which the server program is running, the input
should not have any ‘/’ character (constituting a blacklist) to indicate a path for the file to be
read. In this paper, we have implemented the solution of using white list and blacklist through
the sanitize( ) method, the code for which is illustrated in Figure 8. The modified file server

8
program that calls the sanitize method to validate the filename before opening the file for read is
shown in Figure 9. The results of the source code analysis of the modified file reader server
program are shown in Figure 10.
Figure 9: Modified File Reader Server Socket Program to Call the Sanitize Method to Validate
the Filename before Opening it to Read (fileReaderServer_2.java)
Figure 10: Results of the Source Code Analysis of the File Reader Server Program after the
Removal of the Path Manipulation Vulnerability (fileReaderServer_2.java)
2.3. System Information Leak Vulnerability
The “System Information Leak” vulnerability (a semantic issue) refers to revealing critical
system data, program structure including call stack or debugging information that may help an
adversary to learn about the software and the system, and form a plan of attack [12]. In our file
reader server program (see Figure 6), we observe that in line 82 (as also indicated by the SCA in
Audit Workbench Issues panel in Figure 10), the printStackTrace( ) method called on the object
of the class IOException has the vulnerability to leak out sensitive system and program
information including its structure and the call stack. While revealing the information about the
call stack leading to an exception may be useful for programmers to debug the program and
quickly as well as effectively trace out the cause of an error, the printStackTrace( ) method
needs to be removed from the final program prior to deployment.
A simple fix to this vulnerability is not to reveal much information about the error, and simply
state that an error has occurred. The attacker, if he was contemplating to leverage the error

9
information to plan for an attack, would not be able to gain much information from the error
message. In this context, we remove the call to the printStackTrace( ) method from line 82 and
replace it with a print statement just indicating that an error occurred. The modified version of
the file reader server socket program is shown in Figure 11 and the results of its source code
analysis are shown in Figure 12.
Figure 11: Modified File Reader Server Program to Remove the System Information Leak
Vulnerability (fileReaderServer_3.java)
Figure 12: Results of the Source Code Analyzer of fileReaderServer_3.java after the Removal
of the System Information Leak Vulnerability and Indicating the Presence of the Denial of
Service Vulnerability
2.4. Denial of Service Vulnerability
A ‘Denial of Service’ vulnerability (a semantic issue) is the one with which an attacker can
cause the program to crash or make it unavailable to legitimate users [10]. Lines 49 and 61 of
the file reader server socket program (as indicated in Figure 12) contain the Denial of Service
vulnerability, and this is attributed to the use of the readLine( ) method. It is always not a good
idea to read a line of characters from a file through a program because the line could contain an
arbitrary number of characters, without a prescribed upper limit. An attacker could misuse this
and force the program to read an unbounded amount of input as a line through the readLine( )
method. An attacker can take advantage of this code to cause an OutOfMemoryException or to
consume a large amount of memory so that the program spends more time performing garbage
collection or runs out of memory during some subsequent operation.
The solution we suggest is to impose an upper bound on the number of characters that can be
read from the file and buffered at a time (i.e., in one single read operation). In this context, we

10
suggest to use the read( ) method of the BufferedReader class that takes three arguments: a
character array to which the characters read from the buffer are stored, the starting index in the
character array to begin storing characters and the number of characters to be read from the
buffer stream. In the context of lines 49 through 54 in the fileReaderServer_4.java program
(boxed in Figure 13), we replace the readLine( ) method with a read( ) method to read the name
of the file or the pathname. If we do not read sufficient number of characters, then the name of
the file stored in the String object filename would be incorrect and this could be detected
through the current implementation of the sanitize( ) method (Figure 8) itself, as the last four
characters of the file has to end in “.txt”. In the context of lines 62 through 71 (boxed in Figure
13), there would not be a problem in reading certain number of characters (rather than a line of
characters) for every read operation, because – whatever is read is stored as a String and is sent
across the socket. In order to preserve the structure of the text, we have to simply use the print( )
method instead of the println( ) method of the PrintStream class. If there is a line break in the
text of the file, it would be captured through an embedded ‘n’ line break character and sent
across the socket.
Figure 13: Modified Code for the File Reader Server Socket Program to Remove the Denial of
Service Vulnerability by Replacing the readLine( ) Method with the read( ) Method
(fileReaderServer_4.java)
Figure 14: Results of the Source Code Analysis of the File Reader Server Program after
Removing the Denial of Service Vulnerability (fileReaderServer_4.java)
In this section, we choose to read 20 characters for each read operation at both the instances and
replace the readLine( ) method with the read( ) method accordingly. In the second case, we read

11
every 20 characters from the file, and the last read operation may read less than 20 characters if
there are not sufficient characters. The subsequent read will return -1 if no character is read. Our
logic (as shown in lines 63-71 of the code in Figure 13) is to check for the return value of the
read operation every time and exit the while loop if the return value is -1, indicating the entire
file has been read.
Note that the length 20 we used here is arbitrary, and could be even set to 100. The bottom line
is there should be a definite upper bound on the number of characters that can be read into the
character buffer, and one should not be allowed to read an arbitrary number of characters with
no defined upper limit. The modified file reader server socket program is shown in Figure 13
and the results of the source code analysis are shown in Figure 14.
2.5. Unreleased Resource Vulnerability
The “Unreleased Resource” vulnerability (a control flow issue) occurs if the program has been
coded in such a way that it can potentially fail to release a system resource [11]. In our file
reader server socket program, the vulnerability arose due to the use of the BufferedReader
stream class (lines 48 and 66 of Figure 13) to read the contents from the socket and the text file
and the PrintStream class to send the contents across the socket to the remote side. Even though
we have called the close( ) methods on the objects of the above two stream classes immediately
after their use is no longer needed, it may be possible that due to abrupt termination of the
program, the close( ) method calls are not executed (also listed in the Issues panel of Figure 14).
One possible reason for the program control to skip the execution of the close( ) method calls
could be a file read error, which could happen if the name of the file read from the socket is not
in the location from which the program is trying to open and read the file. Another reason
(which is very unlikely to happen though, given the smaller size of the file) could be that there
is no sufficient memory in the system to load the contents of the text file and read them.
Similarly, in the case of sending across the socket, there may be an error if the client abruptly
closes the socket while the server attempts to transmit them across the socket. Either way, if any
such buffer reading or sending errors occur, the program control immediately shifts from the try
block to the catch block and the streams corresponding to the BufferedReader and PrintStream
classes will never be released until the operating system explicitly forces the release of these
resources upon the termination of the program. From a security standpoint, if an attacker could
sense the presence of Unreleased Resource vulnerability in a program, he can intentionally
trigger resource leaks and failures in the operating environment of the program (like making the
file unavailable to be read or closing the socket from the remote side, if the client is
compromised) to cause a depletion of the resource pool.
The solution we suggest is to add a finally { … } block after the try {…} catch {…} blocks and
release all the resources that were used by the code in the corresponding try block. Note that in
order to do so, the variables associated with the resources have to be declared outside and before
the try block so that they can be accessed inside the finally block. In our case, we have to
declare the stream objects of the BufferedReader and PrintStream classes outside the try block
and close them explicitly in the finally block. The modified code segment
(fileReaderServre_5.java) is shown in Figure 15. The results generated from analyzing the
fileReaderServer_5.java code with the Source Code Analyzer are shown in Figure 16. Note that
in order to close the two FileReader and BufferedReader streams in lines 66 and 68 of the
finally {...} block, we have to declare that the main function throws the IOException in line 7.
Note that as shown in Figure 15, the reason why we are insisting on including the close( )
method calls on the two stream objects in a finally block instead of a catch block, even though it
is supposed to catch the IOException, is that in case a try block can generate multiple exceptions
– there has to be multiple catch blocks for the try block, one for each exception, and these catch

12
blocks have to be listed in the order of increasing scope – i.e., the exception that is the
bottommost in the hierarchy of exceptions has to be caught first, followed by exceptions further
up in the hierarchy. However, if at run-time, an exception higher up in the hierarchy is
generated, the control transfers to the catch block of that particular exception, and only the
subsequent catch blocks are executed, and not the catch blocks prior to it. This way, if we had
included the close( ) methods in the catch block for the IOException class and relied on it to be
called in case of a file read error, there might be a situation that another catch block downstream
is called due to the generation of an exception higher up in the exception hierarchy, and the two
stream objects would not be released. Thus, in any situation, we do not recommend releasing
system resources inside catch blocks. The results of the source code analysis of the final version
of the file reader server socket program (fileReaderServer_5.java) are shown in Figure 16, after
removing all the five main vulnerabilities in the code. The only warnings remaining in Figure
16 are those corresponding to the poor logging practice and J2EE Bad Practices: Sockets,
which are not critical to be removed for standard Java programming environments.
Figure 15: Modified Code Segment to Remove the Unreleased Resource Vulnerability
Before we conclude, we also argue that it is not advisable to include a finalize( ) method for the
particular classes of the objects for which the resources allocated need to be reclaimed. In order
for an object’s finalize( ) method to be invoked, the garbage collector must first of all determine
that the object is eligible for garbage collection. However, the garbage collector is not required
to run unless the Java Virtual Machine (JVM) is low on memory, and hence there is no
guarantee that an object’s finalize( ) method will be invoked in an expedient fashion. Even if the
garbage collector gets to run, all the resources will be reclaimed in a short period of time, and
this can lead to “bursty” performance and a reduction in the overall system throughput. Such an
effect is more pronounced as the load on the system increases. Also, it is possible for the thread
executing the finalize( ) method to hang if the resource reclamation operation requires
communication over a network or a database connection to complete the operation.

13
Figure 16: Results of Source Code Analysis on the Final Version of the File Reader Server
Socket Program with all the Main Vulnerabilities and Warnings Removed
3. A SUMMARIZED OVERVIEW OF THE VULNERABILITIES AND THE
SOLUTIONS
In this section, we summarize the seven different vulnerabilities analyzed in the paper and the
solutions presented to remove them from the programs.
• Denial of Service Vulnerability: The Denial of Service Vulnerability in the file reader
program arose because of the use of the readLine( ) method that has no upper bound on the
number of characters to be read as a line of input from the file. As a result, if an attacker
manages to point the FileReader object to a file that has significantly larger number of
characters per line, then there is a possibility of overflowing the memory (especially in
embedded systems, potentially causing a denial of service attack. The readLine( ) method is
an atomic operation and the characters that are read as part of a line from the file are not
written to the socket until the end-of-line (‘n’) character is come across. The solution we
suggest is to impose an upper limit on the number of characters that are to be read any time
from the file, and do not have the option of letting the user to be able to read an arbitrary
number of characters, without any upper limit, in one single read operation.
• Unreleased Resource Vulnerability: The Unreleased Resource vulnerability arises when
the developer does not include appropriate code that would guarantee the release of the
system resources after their intended use (i.e., the resources are no longer needed in the
program). In the context of the file writer program, the unreleased resource vulnerability was
attributed due to the possibility of the stream objects (the File Reader and Buffered Reader)
that were instantiated to read the password text file not being released due to unanticipated
errors during the file read operation, and the control flow of the program immediately
switching to the catch block for the IOException (the exception class handling most of the
file read errors in Java) and not executing the release statements (the close method calls) for
the streams in the try block. Once the control exits the catch block, the program continues to
normally execute the code following the entire try-catch block and does not go back to
execute the remaining code in the try block where the error occurred. Hence, at most care
should be taken to release the resources that were allocated inside the try block.
However, since there can be more one than catch block, for a single try block, depending on
the specific exceptions that could be generated from the try block and need to be caught and
processed, it would not be a good idea to include statements pertaining to the release of the
allocated system resources in a particular catch block. This is because catch blocks are

14
supposed to be listed in the increasing order of the scope of the possible exceptions that could
be generated from the try block, and hence if an exception that is higher up in the hierarchy
than an IOException is generated before completing the file read operation, then the control
would go to a catch block that is included somewhere below the catch block for the
IOException class, and the stream resources allocated for the file read operation would not be
released at all. To avoid such a scenario, one solution is to include redundant resource release
statements in each of the catch blocks. This would unnecessarily increase the code size and
the memory footprint of the program. An alternate and better solution is to include a finally
block (optional in Java and need not be used along with a try-catch block) following the
catch blocks and include in it all the statements related to the release of the allocated system
resources in the corresponding try block. The good news is the Java Virtual Machine will
definitely execute the finally block after executing one or more catch block(s), and will not
skip it. This way, the allocated system resources in the try block are guaranteed to be
released.
• System Information Leak Vulnerability: This vulnerability arises when the print
statements, in response to unexpected inputs or execution flow, can be used to infer critical
information about the program structure, including the sequence of method calls (the call
stack). Developers include print statements to facilitate debugging for any erroneous
behavior/input. Often such print statements are left in the code even after deployment.
Attackers could take advantage of this vulnerability and pass cleverly crafted suitable input
values to the program so that it generates the informative error messages. For example, there
is a difference between displaying a generic error message like ‘Incorrect username or
password’ compared to a more informative error message like ‘Access denied’. In the former
case, one cannot easily infer whether the username is wrong or the password is wrong,
essentially perplexing the attacker whether or not there exists an account with the particular
username passed as input. However, with the ‘Access denied’ error message, the attacker
could easily infer that there exists an account with the attempted username; it is only the
password that is invalid. Nevertheless, generic error messages baffle the genuine users of the
system and would not be able to infer much from these messages. Thus, there is a tradeoff
between the amount of information displayed through the error messages and the ease
associated with identifying or debugging the error and fixing the problem.
• Path Manipulation Vulnerability: The path manipulation vulnerability arises when the
inputs entered by the user are directly embedded into the program and executed, without
validating the correctness and appropriateness of the input values. The vulnerability becomes
more critical if the user values are directly embedded into path statements that read a critical
system resource (say a file) and the program executes them with elevated privileges (higher
than that of the user who passed the input). We present two solution approaches to handle
this vulnerability (presenting a list of probable inputs only from which the user can choose
his choice or sanitizing/filtering the user input by validating it with a blacklist of non-
allowable characters and a white list of allowable characters). We adopt the second approach
and present a sanitizer code in Java that scans the user input for the path/name of the log file
with respect to a blacklist of non-allowable characters and a white list of allowable
characters.
• Resource Injection Vulnerability: Like the Path Manipulation vulnerability, the Resource
Injection vulnerability occurs due to the embedding of user entered inputs to a program so
that the attacker gets direct access to a resource identifier (like ports) that would have been
otherwise inaccessible. In the connection-oriented server socket program, we illustrate the
incidence of the vulnerability by letting a user to open a server socket at the port number of
his choice. Even though server programs are typically started by the system administrator, if
the system is under attack – this feature could be misused and an attacker can start the server
program at a port number of his choice, typically by passing port numbers that are reserved

15
for other regular/critical system processes. We remove this vulnerability by presenting the
user a list of port numbers to choose from, and the user has no option other than choosing one
among those in the list. Though this option reveals the list of available port numbers, the user
is constrained to choose only from this list.
4. CONCLUSIONS AND FUTURE WORK
Software security is a rapidly growing field and is most sought after in both industry and
academics. With the development of automated tools such as Fortify Source Code Analyzer, it
becomes more tenable for a software developer to fix, in-house, the vulnerabilities associated
with the software prior to its release and reduce the number of patches that need to be applied to
the software after its release. In this paper, we have discussed the use of an automated tool
called the Source Code Analyzer (SCA), developed by Fortify, Inc., and illustrated the use of its
command line and graphical user interface (Audit Workbench) options to present and analyze
the vulnerabilities identified in a software program. The SCA could be used in a variety of
platforms and several object-oriented programming languages. We present an exhaustive case
study of a file reader server socket program, developed in Java, which looks fine at the outset;
but is analyzed to contain critical vulnerabilities that could have serious impacts when
exploited.
The five different vulnerabilities we have studied in this research are: Resource Injection
vulnerability, Path Manipulation vulnerability, System Information Leak vulnerability, Denial
of Service vulnerability, and Unreleased Resource vulnerability in the context of streams. We
discussed the reasons these vulnerabilities appeared in the code and how they could be exploited
if left unattended and the consequences of an attack. We have provided detailed solutions to
efficiently and effectively remove each of these vulnerabilities, presented the appropriate code
snippets and the results of source code analysis when the vulnerabilities are fixed one after the
other. The tradeoffs incurred due to the incorporation of appropriate solutions to fix these
vulnerabilities are the increase in code size and decrease in the comfort level for a naïve
authentic user who could face some initial technical difficulties in getting the program to run as
desired. With generic error messages that are not so detailed, an authentic (but relatively
unfamiliar) user ends up spending more time to run the system as desired. The original file
reader server program had 43 lines of code, and the final version of the program
(fileReaderServer_5.java) contains 114 lines – thus, an increase in the size of the code by a
factor of about 2.65 (i.e., 165% increase). However, the increase in code size is worth because
even if one the above 5 vulnerabilities is exploited by an attacker, it could be catastrophic for
the entire network hosting the server.
As part of future work, we plan to conduct exhaustive source code analysis on network socket
programs developed in C/C++, for Windows and Linux platforms, and analyze their impacts
and develop effective solutions to fix (i.e., completely remove or mitigate the effects as much as
possible) the characteristic vulnerabilities identified for the specific platform/ programming
language. Even though the code snippets provided as solutions to remove the various software
security vulnerabilities discussed in this paper are written in Java, the solutions proposed and
implemented here for each of the vulnerabilities are more generic and can be appropriately
modified and applied in other programming language environments.
ACKNOWLEDGMENTS
The work leading to this paper is partly funded through the U. S. National Science Foundation
(NSF) CCLI/TUES grant (DUE-0941959) on “Incorporating Systems Security and Software
Security in Senior Projects.” The views and conclusions contained in this document are those of
the author and should not be interpreted as necessarily representing the official policies, either
expressed or implied, of the funding agency.

16
REFERENCES
[1] B. Chess, and J. West, Secure Programming with Static Analysis, Addison Wesley, 1st
Edition,
Boston, MA, USA, 2008.
[2] M. R. Stytz, and S. B. Banks, “Dynamic Software Security Testing,” IEEE Security and Privacy, vol.
4, no. 3, pp. 77-79, 2006.
[3] D. Baca, “Static Code Analysis to Detect Software Security Vulnerabilities – Does Experience
Matter?,” Proceedings of the IEEE International Conference on Availability, Reliability and Security,
pp. 804-810, 2009.
[4] P. R. Caseley, and M. J. Hadley, “Assessing the Effectiveness of Static Code Analysis,” Proceedings
of the 1st
Institution of Engineering and Technology International Conference on System Safety, pp.
227-237, 2006.
[5] I. A. Tondel, M. G. Jaatun and J. Jensen, “Learning from Software Security Testing,” Proceedings of
the International Conference on Software Testing Verification and Validation Workshop, pp. 286-
294, 2008.
[6] H. Mcheick, H. Dhiab, M. Dbouk and R. Mcheik, “Detecting Type Errors and Secure Coding in
C/C++ Applications,” Proceedings of the IEEE/ACS International Conference on Computer Systems
and Applications, pp. 1-9, 2010.
[7] M. Mantere, I. Uusitalo and J. Roning, “Comparison of Static Code Analysis Tools,” Proceedings of
the 3rd
International Conference on Emerging Security Information, Systems and Technologies, pp.
15-22, 2009.
[8] J. Novak, A. Krajnc and R. Zontar, “Taxonomy of Static Code Analysis Tools,” Proceedings of the
33rd
IEEE International Conference on Information and Communication Technology, Electronics
and Microelectronics, pp. 418-422, 2010.
[9] https://www.fortify.com/products/hpfssc/source-code-analyzer.html, last accessed: July 2, 2012.
[10] M. G. Graff, and K. R. Van Wyk, Secure Coding: Principles and Practices, O’Reilly Media,
Sebastopol, CA, USA, 2003.
[11] M. Howard, D. Leblanc, and J. Viega, 24 Deadly Sins of Software Security: Programming Flaws and
How to Fix them, McGraw-Hill, New York City, NY, USA, 2009.
[12] J. A. Whittaker, How to Break Software, Addison-Wesley, Boston, MA, USA, 2002.
Author
Dr. Natarajan Meghanathan is a tenured Associate Professor of Computer Science at
Jackson State University. He graduated with MS and PhD degrees in Computer
Science from Auburn University and The University of Texas at Dallas respectively.
He has authored more than 140 peer-reviewed publications. He has received federal
grants from the U. S. National Science Foundation, Army Research Lab and Air
Force Research Lab. He is serving in the editorial board of several international
journals and in the organization/program committees of several international
conferences. His research interests are: Wireless Ad hoc Networks and Sensor
Networks, Network Security and Software Security, Graph Theory, Computational Biology and Cloud
Computing.

SOURCE CODE ANALYSIS TO REMOVE SECURITY VULNERABILITIES IN JAVA SOCKET PROGRAMS: A CASE STUDY

Recommended

More Related Content

What's hot (20)

Similar to SOURCE CODE ANALYSIS TO REMOVE SECURITY VULNERABILITIES IN JAVA SOCKET PROGRAMS: A CASE STUDY (20)

Recently uploaded (20)

SOURCE CODE ANALYSIS TO REMOVE SECURITY VULNERABILITIES IN JAVA SOCKET PROGRAMS: A CASE STUDY