Unix Basics For Testers
Download as DOC, PDF1 like3,525 views
This document provides an overview of basic Unix commands including ls, cd, pwd, mkdir, rm, rmdir, cp, find, touch, echo, cat, who, and du. It explains what each command is used for and provides examples of common usages. The document serves as a beginner's guide to learning Unix commands.
![rm is often aliased to "rm -i" so as to avoid accidental deletion of files. If a user still
wishes to delete a large number of files without confirmation, they can manually cancel
out the -i argument by adding the -f option.
"rm -rf" (variously, "rm -rf /", "rm -rf *", and others) is frequently used in jokes and
anecdotes about Unix disasters. The "rm -rf /" variant of the command, if run by an
administrator, would cause the contents of every mounted disk on the computer to be
deleted.
rmdir
is a command which will remove an empty directory on a Unix-system. It cannot be
capitalized. Normal usage is straightforward where one types:
rmdir name_of_directory
Where name_of_directory corresponds with the name of the directory one wishes to
delete. There are options to this command such as -p which removes parent directories if
they are also empty.
For example:
rmdir –p foo/bar/baz
Will first remove baz/, then bar/ and finally foo/ thus removing the entire directory tree
specified in the command argument.
Often rmdir will not remove a directory if there is still files present in the directory. To
force the removal of the directory even if files are present usually the -rf flag can be used.
For example:
rmdir -Rf for/bar/baz
cp
is the command entered in a Unix shell to copy a file from one place to another, possibly
on a different filesystem. The original file remains unchanged, and the new file may have
the same or a different name.
To Copy a File to another File
cp [ -f ] [ -h ] [ -i ] [ -p ][ -- ] SourceFile TargetFile
To Copy a File to a Directory
cp [ -f ] [ -h ] [ -i ] [ -p ] [ -r | -R ] [ -- ] SourceFile ... TargetDirectory
To Copy a Directory to a Directory
cp [ -f ] [ -h ] [ -i ] [ -p ] [ -- ] { -r | -R } SourceDirectory ... TargetDirectory
-f (force) – specifies removal of the target file if it cannot be opened for write operations.](https://image.slidesharecdn.com/unix-basics-for-testers-090929073704-phpapp01/85/Unix-Basics-For-Testers-3-320.jpg)
![Search all directories
find / -name "myfile" -type f -print
This searches every file on the computer for a file with the name myfile. It is generally
not a good idea to look for data files this way. This can take a considerable amount of
time, so it is best to specify the directory more precisely.
Specify a directory
find /home/brian -name "myfile" -type f -print
This searches for files named myfile in the /home/brian directory, which is the home
directory for the user brian. You should always specify the directory to the deepest level
you can remember.
Find any one of differently named files
find . ( -name "*jsp" -or -name "*java" ) -type f -ls
This prints extended information on any file whose name ends with either 'jsp' or 'java'.
Note that the parentheses are required. Also note that the operator "or" can be abbreviated
as "o". The "and" operator is assumed where no operator is given. In many shells the
parentheses must be escaped with a backslash, "(" and ")", to prevent them from being
interpreted as special shell characters.
touch
is a program on Unix and Unix-like systems used to change a file's date- and time-stamp.
It can also be used to create an empty file. The command-syntax is:
touch [options] <file_name>
If the file exists, its access and modification time-stamps are set to the system's current
date and time, as if the file had been changed. To touch a file simulates a change to the
file. If the file does not exist, an empty file of that name is created with its access and
modification time-stamps set to the system's current date and time. If no file path is
specified, the current directory is assumed.
touch can be invoked with options to change its behaviour, which may vary from one
Unix to another. One option makes it possible to set the file's time-stamp to something
other than the current system date and time, but this action is normally restricted to the
owner of the file or the system's superuser.
echo
is a command in Unix (and by extension, its descendants, such as Linux) and MS-DOS
that places a string on the terminal. It is typically used in shell scripts and batch programs
to output status text to the screen or a file.](https://image.slidesharecdn.com/unix-basics-for-testers-090929073704-phpapp01/85/Unix-Basics-For-Testers-6-320.jpg)
Unix Basics For Testers
- 1. UNIX BASICS - Beginners guide for Unix commands - by Meenakshi For more software testing articles visit: http://www.softwaretestinghelp.com Main features of unix : Multi user - More than one user can use the machine Multitasking- More than one program can be run at a time. Portability – This means the operating system can be easily converted to run on different browsers. Commands ls when invoked without any arguments, lists the files in the current working directory. A directory that is not the current working directory can be specified and ls will list the files there. The user also may specify any list of files and directories. In this case, all files and all contents of specified directories will be listed. Files whose names start with "." are not listed, unless the -a flag is specified or the files are specified explicitly. Without options, ls displays files in a bare format. This bare format however makes it difficult to establish the type, permissions, and size of the files. The most common options to reveal this information or change the list of files are: -l long format, displaying Unix file type, permissions, number of hard links, owner, group, size, date, and filename -F appends a character revealing the nature of a file, for example, * for an executable, or / for a directory. Regular files have no suffix. -a lists all files in the given directory, including those whose names start with "." By default, these files are excluded from the list. -R recursively lists subdirectories. The command ls -R / would therefore list all files. cd
- 2. Is a command line command used to change the current working directory in the Unix and DOS operating systems. It is also available for use in Unix shell scripts or DOS batch files. cd is frequently included built into certain shells such as the Bourne shell, tcsh, bash (where it calls the chdir() POSIX C function) and in DOS's COMMAND.COM. A directory is a logical section of a filesystem used to hold files. Directories may also contain other directories. The cd command can be used to change into a subdirectory, move back into the parent directory, move all the way back to the root (/ in UNIX, in DOS) or move to any given directory. pwd command (print working directory) is used to print the name of current working directory from a computer's command-line interface. If the shell prompt does not already show this, the user can use this command to find their place in the directory tree. This command is found in the Unix family of operating systems and other flavors as well. The DOS equivalent is "CD" with no arguments. It is a command which is sometimes included built into certain shells such as sh, and bash. It can be implemented easily with the POSIX C functions getcwd() and/or getwd(). Example: $ pwd /home/foobar mkdir command in the Unix operating system is used to make a new Directory. Normal usage is as straightforward as follows: mkdir name_of_directory Where name_of_directory is the name of the directory one wants to create. When typed as above (ie. normal usage), the new directory would be created within the current directory. rm (short for remove) is a Unix command used to delete files from a filesystem. Common options that rm accepts include: -r, which processes subdirectories recursively -i, which asks for every deletion to be confirmed -f, which ignores non-existent files and overrides any confirmation prompts ("force")
- 3. rm is often aliased to "rm -i" so as to avoid accidental deletion of files. If a user still wishes to delete a large number of files without confirmation, they can manually cancel out the -i argument by adding the -f option. "rm -rf" (variously, "rm -rf /", "rm -rf *", and others) is frequently used in jokes and anecdotes about Unix disasters. The "rm -rf /" variant of the command, if run by an administrator, would cause the contents of every mounted disk on the computer to be deleted. rmdir is a command which will remove an empty directory on a Unix-system. It cannot be capitalized. Normal usage is straightforward where one types: rmdir name_of_directory Where name_of_directory corresponds with the name of the directory one wishes to delete. There are options to this command such as -p which removes parent directories if they are also empty. For example: rmdir –p foo/bar/baz Will first remove baz/, then bar/ and finally foo/ thus removing the entire directory tree specified in the command argument. Often rmdir will not remove a directory if there is still files present in the directory. To force the removal of the directory even if files are present usually the -rf flag can be used. For example: rmdir -Rf for/bar/baz cp is the command entered in a Unix shell to copy a file from one place to another, possibly on a different filesystem. The original file remains unchanged, and the new file may have the same or a different name. To Copy a File to another File cp [ -f ] [ -h ] [ -i ] [ -p ][ -- ] SourceFile TargetFile To Copy a File to a Directory cp [ -f ] [ -h ] [ -i ] [ -p ] [ -r | -R ] [ -- ] SourceFile ... TargetDirectory To Copy a Directory to a Directory cp [ -f ] [ -h ] [ -i ] [ -p ] [ -- ] { -r | -R } SourceDirectory ... TargetDirectory -f (force) – specifies removal of the target file if it cannot be opened for write operations.
- 4. The removal precedes any copying performed by the cp command. -h – makes the cp command copy symbolic links. The default is to follow symbolic links, that is, to copy files to which symbolic links point. -i (interactive) – prompts you with the name of a file to be overwritten. This occurs if the TargetDirectory or TargetFile parameter contains a file with the same name as a file specified in the SourceFile or SourceDirectory parameter. If you enter y or the locale's equivalent of y, the cp command continues. Any other answer prevents the cp command from overwriting the file. -p (preserve) – duplicates the following characteristics of each SourceFile/SourceDirectory in the corresponding TargetFile and/or TargetDirectory: Examples To make a copy of a file in the current directory, enter: cp prog.c prog.bak This copies prog.c to prog.bak. If the prog.bak file does not already exist, the cp command creates it. If it does exist, the cp command replaces it with a copy of the prog.c file. To copy a file in your current directory into another directory, enter: cp jones /home/nick/clients This copies the jones file to /home/nick/clients/jones. To copy a file to a new file and preserve the modification date, time, and access control list associated with the source file, enter: cp -p smith smith.jr This copies the smith file to the smith.jr file. Instead of creating the file with the current date and time stamp, the system gives the smith.jr file the same date and time as the smith file. The smith.jr file also inherits the smith file's access control protection. To copy all the files in a directory to a new directory, enter: cp /home/janet/clients/* /home/nick/customers This copies only the files in the clients directory to the customers directory. To copy a directory, including all its files and subdirectories, to another directory, enter: cp -R /home/nick/clients /home/nick/customers This copies the clients directory, including all its files, subdirectories, and the files in those subdirectories, to the customers/clients directory. To copy a specific set of files to another directory, enter: cp jones lewis smith /home/nick/clients This copies the jones, lewis, and smith files in your current working directory to the
- 5. /home/nick/clients directory. To use pattern-matching characters to copy files, enter: cp programs/*.c . This copies the files in the programs directory that end with .c to the current directory, signified by the single . (dot). You must type a space between the c and the final dot. find program is a search utility, mostly found on Unix-like platforms. It searches through a directory tree of a filesystem, locating files based on some user-specified criteria. By default, find returns all files below the current working directory. Further, find allows the user to specify an action to be taken on each matched file. Thus, it is an extremely powerful program for applying actions to many files. It also supports regexp matching. Examples From current directory find . -name my* This searches in the current directory (represented by a period) and below it, for files and directories with names starting with my. The backslash before the star is needed to avoid the shell expansion. Without the backslash, the shell would replace my* with the list of files whose names begin with my in the current directory. An alternative is to enclose the the arguments in quotes: find . -name "my*" Files only find . -name "my*" -type f This limits the results of the above search to only regular files, therefore excluding directories, special files, pipes, symbolic links, etc. my* is enclosed in quotes as otherwise the shell would replace it with the list of files in the current directory starting with my Commands The previous examples created listings of results because, by default, find executes the '- print' action. (Note that early versions of the find command had no default action at all; therefore the resulting list of files would be discarded, to the bewilderment of naïve users.) find . -name "my*" -type f -ls This prints an extended file information.
- 6. Search all directories find / -name "myfile" -type f -print This searches every file on the computer for a file with the name myfile. It is generally not a good idea to look for data files this way. This can take a considerable amount of time, so it is best to specify the directory more precisely. Specify a directory find /home/brian -name "myfile" -type f -print This searches for files named myfile in the /home/brian directory, which is the home directory for the user brian. You should always specify the directory to the deepest level you can remember. Find any one of differently named files find . ( -name "*jsp" -or -name "*java" ) -type f -ls This prints extended information on any file whose name ends with either 'jsp' or 'java'. Note that the parentheses are required. Also note that the operator "or" can be abbreviated as "o". The "and" operator is assumed where no operator is given. In many shells the parentheses must be escaped with a backslash, "(" and ")", to prevent them from being interpreted as special shell characters. touch is a program on Unix and Unix-like systems used to change a file's date- and time-stamp. It can also be used to create an empty file. The command-syntax is: touch [options] <file_name> If the file exists, its access and modification time-stamps are set to the system's current date and time, as if the file had been changed. To touch a file simulates a change to the file. If the file does not exist, an empty file of that name is created with its access and modification time-stamps set to the system's current date and time. If no file path is specified, the current directory is assumed. touch can be invoked with options to change its behaviour, which may vary from one Unix to another. One option makes it possible to set the file's time-stamp to something other than the current system date and time, but this action is normally restricted to the owner of the file or the system's superuser. echo is a command in Unix (and by extension, its descendants, such as Linux) and MS-DOS that places a string on the terminal. It is typically used in shell scripts and batch programs to output status text to the screen or a file.
- 7. $ echo This is a test. This is a test. $ echo "This is a test." > ./test.txt $ cat ./test.txt This is a test. cat program concatenates the contents of files, reading from a list of files and/or standard input in sequence and writing their contents in order to standard output. cat takes the list of files as arguments but also interprets the argument "-" as standard input. Example: cat filename who The Unix command who displays a list of users who are currently logged into a computer. The command accepts various options that vary by system to further specify the information that is returned, such as the length of time a particular user has been connected or what pseudo-teletype a user is connected to. The who command is related to the command w, which provides the same information but also displays additional data and statistics. Example output user19 pts/35 Apr 18 08:40 (localhost) user28 pts/27 Apr 18 09:50 (localhost) du (abbreviated from disk usage) is a Unix computer program to display the amount of disk space used under a particular directory or files on a file system. du counts the disk space by walking the directory tree. As such, the amount of space on a file system shown by du may vary from that shown by df if files have been deleted but their blocks not yet freed. In Linux, it is a part of the GNU Coreutils package. The du utility first appeared in version 1 of AT&T UNIX. Example The -k flag will show the sizes in 1K blocks, rather than the default of 512 byte blocks. $du -k /seclog 4 /seclog/lost+found
- 8. 132 /seclog/backup/aix7 136 /seclog/backup 44044 /seclog/temp 439264 /seclog We will discuss more advanced commands in the next article. For more software testing resources visit following pages: Software Testing articles: http://www.softwaretestinghelp.com/sitemap/ QA/Testing Job openings: http://www.softwaretestinghelp.com/jobs/ Software Testing Help: http://www.softwaretestinghelp.com/ Copyright 2008: http://www.softwaretestinghelp.com