ci(pre-commit): Fix whitespace, EOLs and codespell 'Analog'

boards.txt

@@ -50392,8 +50392,8 @@ kodedot.build.core=esp32
 kodedot.build.variant=kodedot
 kodedot.build.board=KODE_DOT
 
-kodedot.build.usb_mode=1   
-kodedot.build.cdc_on_boot=1   
+kodedot.build.usb_mode=1
+kodedot.build.cdc_on_boot=1
 kodedot.build.msc_on_boot=0
 kodedot.build.dfu_on_boot=0
 

tools/partitions/kodedot_partitions.csv

@@ -4,4 +4,4 @@ phy_init, data, phy,     0xf000,  0x1000,
 otadata,  data, ota,     0x10000, 0x2000,
 ota_0,  app,  ota_0, 0x20000, 0x3E0000,
 ota_1,  app,  ota_1,   0x400000, 0x800000,
-storage,  data, spiffs,  0xC00000, 0x400000,
+storage,  data, spiffs,  0xC00000, 0x400000,

variants/kodedot/custom_ota_override.cpp

@@ -1,5 +1,14 @@
-extern "C" bool verifyRollbackLater() {
-    // Returning true prevents the OTA image from being marked as valid
-    // until you explicitly confirm it after the first boot.
-    return true;
-}
+// custom_ota_override.cpp
+// This function overrides the weak definition of `verifyRollbackLater()` in the kode dot board.
+
+extern "C" {
+  // Declare the weak function symbol to override it
+  bool verifyRollbackLater() __attribute__((weak));
+}
+
+// Custom implementation of verifyRollbackLater()
+// Returning `true` prevents the OTA image from being automatically marked as valid.
+// This ensures that the system will roll back to the previous image unless it is explicitly validated later.
+bool verifyRollbackLater() {
+  return true;
+}

variants/kodedot/pins_arduino.h

@@ -17,27 +17,27 @@
 #include <stdbool.h>
 
 /*──────────────── USB device descriptor ────────────────*/
-#define USB_VID 0x303A         // Espressif Systems VID
-#define USB_PID 0x1001         // Product ID: KodeDot-S3
+#define USB_VID 0x303A  // Espressif Systems VID
+#define USB_PID 0x1001  // Product ID: KodeDot-S3
 
 /*──────────────── UART0 (Arduino Serial) ────────────────*/
 static const uint8_t TX = 43;  // U0TXD – PIN16 on the 2×10 header
 static const uint8_t RX = 44;  // U0RXD – PIN18 on the 2×10 header
 
 /*──────────────── I²C buses ─────────────────────────────*/
 /* External expansion bus → header pins 11/13 */
-static const uint8_t SCL = 37; // GPIO37 – PIN12
-static const uint8_t SDA = 36; // GPIO36 – PIN14
+static const uint8_t SCL = 37;  // GPIO37 – PIN12
+static const uint8_t SDA = 36;  // GPIO36 – PIN14
 
 /* Internal sensor/touch bus (not on header) */
-#define INT_I2C_SCL 47         // GPIO47
-#define INT_I2C_SDA 48         // GPIO48
+#define INT_I2C_SCL 47  // GPIO47
+#define INT_I2C_SDA 48  // GPIO48
 
 /*──────────────── SPI2 – micro-SD ───────────────────────*/
-static const uint8_t SS   = 15; // SD_CS
-static const uint8_t MOSI = 16; // SD_MOSI
-static const uint8_t MISO = 18; // SD_MISO
-static const uint8_t SCK  = 17; // SD_CLK
+static const uint8_t SS = 15;    // SD_CS
+static const uint8_t MOSI = 16;  // SD_MOSI
+static const uint8_t MISO = 18;  // SD_MISO
+static const uint8_t SCK  = 17;  // SD_CLK
 #define BOARD_HAS_SD_SPI
 #define SD_CS SS
 
@@ -47,60 +47,60 @@ static const uint8_t SCK  = 17; // SD_CLK
  * Clock:      40 MHz
  */
 #define BOARD_HAS_SPI_LCD
-#define LCD_MODEL             ST7789
-#define LCD_WIDTH             410
-#define LCD_HEIGHT            502
+#define LCD_MODEL  ST7789
+#define LCD_WIDTH  410
+#define LCD_HEIGHT 502
 
-#define LCD_HOST              SPI3_HOST
-#define LCD_SCK               35  // GPIO35  • QSPI_CLK
-#define LCD_MOSI              33  // GPIO33  • QSPI_IO0 (D0)
-#define LCD_IO1               34  // GPIO34  • QSPI_IO1 (D1)
-#define LCD_IO2               37  // GPIO37  • QSPI_IO2 (D2)
-#define LCD_IO3               36  // GPIO36  • QSPI_IO3 (D3)
-#define LCD_CS                10  // GPIO10
-#define LCD_RST                9  // GPIO09
-#define LCD_DC               -1   // not used in 4-line SPI
+#define LCD_HOST SPI3_HOST
+#define LCD_SCK  35  // GPIO35  • QSPI_CLK
+#define LCD_MOSI 33  // GPIO33  • QSPI_IO0 (D0)
+#define LCD_IO1  34  // GPIO34  • QSPI_IO1 (D1)
+#define LCD_IO2  37  // GPIO37  • QSPI_IO2 (D2)
+#define LCD_IO3  36  // GPIO36  • QSPI_IO3 (D3)
+#define LCD_CS   10  // GPIO10
+#define LCD_RST  9   // GPIO09
+#define LCD_DC   -1  // not used in 4-line SPI
 /* Optional: back-light enable shares the NeoPixel pin */
-#define LCD_BL                 5  // GPIO05 (same as NEOPIXEL)
+#define LCD_BL 5  // GPIO05 (same as NEOPIXEL)
 
-/*──────────────── Analogue / Touch pads ────────────────*/
+/*──────────────── Analog / Touch pads ────────────────*/
 static const uint8_t A0 = 11;  // PIN4  – GPIO11 / TOUCH11 / ADC2_CH0
 static const uint8_t A1 = 12;  // PIN6  – GPIO12 / TOUCH12 / ADC2_CH1
 static const uint8_t A2 = 13;  // PIN8  – GPIO13 / TOUCH13 / ADC2_CH2
 static const uint8_t A3 = 14;  // PIN10 – GPIO14 / TOUCH14 / ADC2_CH3
 static const uint8_t T0 = A0, T1 = A1, T2 = A2, T3 = A3;
 
 /*──────────────── On-board controls & indicator ─────────*/
-#define BUTTON_TOP        0      // GPIO00 – BOOT    • active-LOW
-#define BUTTON_BOTTOM     6      // GPIO06           • active-LOW
-#define NEOPIXEL_PIN      5      // GPIO05 – WS2812
-#define LED_BUILTIN       NEOPIXEL_PIN
+#define BUTTON_TOP    0  // GPIO00 – BOOT    • active-LOW
+#define BUTTON_BOTTOM 6  // GPIO06           • active-LOW
+#define NEOPIXEL_PIN  5  // GPIO05 – WS2812
+#define LED_BUILTIN   NEOPIXEL_PIN
 
 /*──────────────── JTAG (also on connector) ──────────────*/
-#define MTCK 39   // PIN11 – GPIO39
-#define MTDO 40   // PIN13 – GPIO40
-#define MTDI 41   // PIN15 – GPIO41
-#define MTMS 42   // PIN17 – GPIO42
+#define MTCK 39  // PIN11 – GPIO39
+#define MTDO 40  // PIN13 – GPIO40
+#define MTDI 41  // PIN15 – GPIO41
+#define MTMS 42  // PIN17 – GPIO42
 
 /*──────────────── 2×10 header: simple aliases ───────────
    NOTE: power pins (1 = 5 V, 2 = 3 V3, 19/20 = GND) are **not**
          exposed as GPIO numbers – they remain undefined here. */
-#define PIN3   1   // GPIO01 / TOUCH1 / ADC1_CH0
-#define PIN4  11   // GPIO11 / TOUCH11 / ADC2_CH0
-#define PIN5   2   // GPIO02 / TOUCH2 / ADC1_CH1
-#define PIN6  12   // GPIO12 / TOUCH12 / ADC2_CH1
-#define PIN7   3   // GPIO03 / TOUCH3 / ADC1_CH2
-#define PIN8  13   // GPIO13 / TOUCH13 / ADC2_CH2
-#define PIN9   4   // GPIO04 / TOUCH4 / ADC1_CH3
-#define PIN10 14   // GPIO14 / TOUCH14 / ADC2_CH3
-#define PIN11 39   // MTCK
-#define PIN12 37   // SCL  (external I²C)
-#define PIN13 40   // MTDO
-#define PIN14 36   // SDA  (external I²C)
-#define PIN15 41   // MTDI
-#define PIN16 43   // TX  (U0TXD)
-#define PIN17 42   // MTMS
-#define PIN18 44   // RX  (U0RXD)
+#define PIN3  1   // GPIO01 / TOUCH1 / ADC1_CH0
+#define PIN4  11  // GPIO11 / TOUCH11 / ADC2_CH0
+#define PIN5  2   // GPIO02 / TOUCH2 / ADC1_CH1
+#define PIN6  12  // GPIO12 / TOUCH12 / ADC2_CH1
+#define PIN7  3   // GPIO03 / TOUCH3 / ADC1_CH2
+#define PIN8  13  // GPIO13 / TOUCH13 / ADC2_CH2
+#define PIN9  4   // GPIO04 / TOUCH4 / ADC1_CH3
+#define PIN10 14  // GPIO14 / TOUCH14 / ADC2_CH3
+#define PIN11 39  // MTCK
+#define PIN12 37  // SCL  (external I²C)
+#define PIN13 40  // MTDO
+#define PIN14 36  // SDA  (external I²C)
+#define PIN15 41  // MTDI
+#define PIN16 43  // TX  (U0TXD)
+#define PIN17 42  // MTMS
+#define PIN18 44  // RX  (U0RXD)
 /* PIN1, PIN2, PIN19, PIN20 are power/ground and deliberately
    left undefined – they are **not** usable as GPIO. */