Label printers can support programming languages like TSPL, ZPL, EPL, and so on. Today we are going to overview the TSPL language. We can build labels using TSPL commands like , and . For instance, if we want to print a label with a text and barcode, we use these commands with their properties like position or size, and send these commands to the label printer over Bluetooth or Serial connection. TEXT BARCODE QRCODE On the left side, you can see the TSPL commands and the printed label on the right side. You can find all the available commands , but let’s look at some of them to understand how to use the TSPL. here Coordinates and size in dots Whether it is a , or , generally, the coordinates and size are in dots. The number of dots per inch depends on the printer's DPI. TEXT BARCODE BITMAP For instance, if the printer is 203 DPI → means there are 203 dots in one inch, or there are 8 dots in 1 mm. 300 DPI → means there are 300 dots in one inch, or there are 11.8 dots in 1 mm. According to this, if we want to add a barcode with a height of 10mm, and the printer is 203DPI, then we should set the height as (10mm x 8 = 80 dots). 80 Size and gap of the label We need to tell the printer the size of the label like this: SIZE 4,1 Here we said that size of the label is 4x1 inches. We can also set it in a metric system (mm): SIZE 50 mm,25 mm We can set the gap which is the space between labels ( ). GAP m,n GAP 0,0 Here the gap is zero inches which means it is a continuous label. Text We can use command to print a text on the label. We can give the position, font size, rotation, and so on: TEXT TEXT x,y,“font”,rotation,x-multiplication,y-multiplication,[alignment,] “content” Parameter Description x, y x and y-coordinate font Generally, we can set 1-8 (1-small, 2-bigger… 8-biggest) rotation 0, 90, 180, 270 in clockwise direction x and y-multiplication Scale factor 1-10 alignment 1-left, 2-center, 3-right (optional) content Text content Sample commands Result TEXT 10,20,"1",0,1,1,"FONT 1" TEXT 10,70,"2",0,1,1,"FONT 2" TEXT 10,120,"3",0,1,1,0,"FONT 3" Barcode We can add a barcode to the label with the command: BARCODE BARCODE X,Y,”code type”,height,human-readable,rotation,narrow,wide,[alignment,]”content” Parameter Description x, y x and y-coordinate code type 128, EAN128, EAN13… height Height in dots human-readable 0 - barcode value (text) is not visible 1 - text is left-aligned 2 - center-aligned 3 - right-aligned rotation 0, 90, 180, 270 in clockwise direction narrow Width of the narrow element in dots wide Width of the wide element in dots alignment 1-left, 2-center, 3-right (optional) content Content of barcode Sample commands: TEXT 10,10, "2",0,1,1, "Human readable alignment" BARCODE 10,50, "128",100,1,0,2,2,"left" BARCODE 310,50, "128",100,2,0,2,2,"center" BARCODE 610,50, "128",100,3,0,2,2,"right" Result: PRINT and END commands After building the label we need to tell the printer that the label is ready to print. We use command to do this: PRINT m[,n] Commands Description SIZE 50 mm,25 mm CLS TEXT 10,10, "2",0,1,1, "Text 1" PRINT 1 CLS TEXT 10,10, "2",0,1,1, "Text 2" PRINT 2 END - Set the size of the label - Clear the buffer - Add text - Print the buffer once - Clear the buffer - Add text - Print the buffer two times - End of program It prints three labels; one label with “Text 1“ and two labels with “Text 2“. We add command at the end, to tell the printer that we’ve finished printing. Without this command, the printer may not print the last image in the buffer. END Printing with JavaScript (Node.js) Generated commands can be sent to the printer over Serial or Bluetooth. To demonstrate this I created a simple code using Node.js. I used the ‘ ’ package to connect and send the commands (On Windows, you may need to install a driver, ). usb to learn more visit the package’s page const usb = require('usb');

const cmds = [
  'SIZE 48 mm,25 mm',
  'CLS',
  'TEXT 10,10,"4",0,1,1,"HackerNoon"',
  'BARCODE 10,60,"128",90,1,0,2,2,"altospos.com"',
  'PRINT 1',
  'END',
];

// you can get all available devices with usb.getDeviceList()
let device = usb.findByIds(/*vid*/8137, /*pid*/8214);
device.open();
device.interfaces[0].claim();
const outEndpoint = device.interfaces[0].endpoints.find(e => e.direction === 'out');
outEndpoint.transferType = 2;
outEndpoint.transfer(Buffer.from(cmds.join('\r\n')), (err) => {
  device.close();
}); And the result: I had to gather information piece by piece about printing labels when I implement this feature on project. So I wrote this article in hope that it will be the starting point for someone in a similar situation. Alto's POS & Inventory No War! ✋🏽

How to Print images with TSPL and JavaScript

Build an App that Prints from a Thermal Bluetooth Printer Using Flutter

Running business made Easy with Free Alto's Cloud POS

How to Print labels with TSPL and JavaScript

About Author

Comments

TOPICS

THIS ARTICLE WAS FEATURED IN

Related Stories

Build an App that Prints from a Thermal Bluetooth Printer Using Flutter

10 Ways To Make Your Innovative, Game-Changing, Synergistic Website Stand Out In 2018

10 Use Cases for Using Laravel to Build Web App Development Projects

10 Things You Can Do Better While Working With Programmers

10 Prioritization Techniques for Agile Product Development

10 Popular Websites Built With Django

Build an App that Prints from a Thermal Bluetooth Printer Using Flutter

10 Ways To Make Your Innovative, Game-Changing, Synergistic Website Stand Out In 2018

10 Use Cases for Using Laravel to Build Web App Development Projects

10 Things You Can Do Better While Working With Programmers

10 Prioritization Techniques for Agile Product Development

10 Popular Websites Built With Django

Light-Mode

Classic

Newspaper

Dark-Mode

Neon Noir

Minty

HN StartUps