Fonction _GUICtrlButton

D�finit l'�tat de surbrillance d'un bouton. L'�tat de surbrillance indique si le bouton est mis en surbrillance comme si l'utilisateur l'avait pouss�

#include <GuiButton.au3>
_GUICtrlButton_SetState ( $hWnd [, $bHighlighted = True] )

Param�tres

Valeur de retour

Remarques

La mise en surbrillance ne concerne que l'apparence du bouton. Elle n'a aucun effet sur l'�tat de coche d'un bouton radio ou d'une case � cocher.

Un bouton est automatiquement mis en surbrillance lorsque l'utilisateur positionne le curseur dessus et presse et maintient le bouton gauche de la souris.
La mise en �vidence est supprim�e lorsque l'utilisateur rel�che le bouton de la souris.

En relation

Voir aussi

Exemple

#include <GuiButton.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Global $g_idMemo

Example()

Func Example()
    Local $idRdo, $idRdo2, $idChk, $idChk2, $idChk3, $idBtn, $idBtn2

    GUICreate("Buttons", 400, 400)
    $g_idMemo = GUICtrlCreateEdit("", 119, 10, 276, 374, $WS_VSCROLL)
    GUICtrlSetFont($g_idMemo, 9, 400, 0, "Courier New")

    $idBtn = GUICtrlCreateButton("Button1", 10, 10, 90, 25)
    _GUICtrlButton_SetState($idBtn)

    $idBtn2 = GUICtrlCreateButton("Button2", 10, 60, 90, 25)

    $idRdo = GUICtrlCreateRadio("Radio1", 10, 110, 90, 25)
    _GUICtrlButton_SetFocus($idRdo)

    $idRdo2 = GUICtrlCreateRadio("Radio2", 10, 170, 90, 25)
    _GUICtrlButton_SetCheck($idRdo2)

    $idChk = GUICtrlCreateCheckbox("Check1", 10, 230, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))
    _GUICtrlButton_SetCheck($idChk, $BST_INDETERMINATE)

    $idChk2 = GUICtrlCreateCheckbox("Check2", 10, 290, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))

    $idChk3 = GUICtrlCreateCheckbox("Check3", 10, 350, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))
    _GUICtrlButton_SetCheck($idChk3, $BST_CHECKED)

    GUISetState(@SW_SHOW)

    MemoWrite("Button1 status:" & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idBtn), True))
    MemoWrite("Button2 status:" & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idBtn2), True))
    MemoWrite("Radio1 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idRdo)))
    MemoWrite("Radio2 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idRdo2)))
    MemoWrite("Check1 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idChk)))
    MemoWrite("Check2 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idChk2)))
    MemoWrite("Check3 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($idChk3)))

    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
EndFunc   ;==>Example

; �crit une ligne dans le contr�le m�mo
Func MemoWrite($sMessage)
    GUICtrlSetData($g_idMemo, $sMessage & @CRLF, 1)
EndFunc   ;==>MemoWrite

Func _ExplainState($iState, $bPushButton = False)
    Local $sText = ""
    If Not $bPushButton And Not $iState Then Return _
            @CRLF & "Indicates the button is cleared. Same as a return value of zero." & @CRLF
    If BitAND($iState, $BST_CHECKED) = $BST_CHECKED Then _
            $sText &= @CRLF & "Indicates the button is checked." & @CRLF
    If BitAND($iState, $BST_FOCUS) = $BST_FOCUS Then _
            $sText &= @CRLF & "Specifies the focus state. A nonzero value indicates that the button has the keyboard focus." & @CRLF
    If BitAND($iState, $BST_INDETERMINATE) = $BST_INDETERMINATE Then _
            $sText &= @CRLF & "Indicates the button is grayed because the state of the button is indeterminate." & @CRLF
    If $bPushButton Then
        If BitAND($iState, $BST_PUSHED) = $BST_PUSHED Then
            $sText &= @CRLF & "Specifies the highlight state." & @CRLF
        Else
            $sText &= @CRLF & "Specifies not highlighted state." & @CRLF
        EndIf
    EndIf
    Return $sText
EndFunc   ;==>_ExplainState

$hWnd	ID/handle du contr�le
$bHighlighted	[optionnel] Indique si le bouton est mis en surbrillance.